diff mbox

[net-next,internal,2/3] mlxsw: cmd: Handle error after reset gracefully

Message ID 20180522112020.934-3-jiri@resnulli.us (mailing list archive)
State Accepted
Delegated to: Ido Schimmel
Headers show

Commit Message

Jiri Pirko May 22, 2018, 11:20 a.m. UTC 
From: Jiri Pirko <jiri@mellanox.com>

There is an exception in command interface processing in case the MRSR
register is written to. The register triggers FW reset and during the
reset FW returns an error. So handle this by ignoring this error while
writing to MRSR register.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlxsw/cmd.h  | 16 +++++++++++-----
 drivers/net/ethernet/mellanox/mlxsw/core.c | 26 +++++++++++++++++++-------
 2 files changed, 30 insertions(+), 12 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/ethernet/mellanox/mlxsw/cmd.h b/drivers/net/ethernet/mellanox/mlxsw/cmd.h
index 8da91b023b13..2bc48054b685 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/cmd.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/cmd.h
@@ -58,7 +58,7 @@  static inline void mlxsw_cmd_mbox_zero(char *mbox)
 struct mlxsw_core;
 
 int mlxsw_cmd_exec(struct mlxsw_core *mlxsw_core, u16 opcode, u8 opcode_mod,
-		   u32 in_mod, bool out_mbox_direct,
+		   u32 in_mod, bool out_mbox_direct, bool reset_ok,
 		   char *in_mbox, size_t in_mbox_size,
 		   char *out_mbox, size_t out_mbox_size);
 
@@ -67,7 +67,7 @@  static inline int mlxsw_cmd_exec_in(struct mlxsw_core *mlxsw_core, u16 opcode,
 				    size_t in_mbox_size)
 {
 	return mlxsw_cmd_exec(mlxsw_core, opcode, opcode_mod, in_mod, false,
-			      in_mbox, in_mbox_size, NULL, 0);
+			      false, in_mbox, in_mbox_size, NULL, 0);
 }
 
 static inline int mlxsw_cmd_exec_out(struct mlxsw_core *mlxsw_core, u16 opcode,
@@ -76,7 +76,7 @@  static inline int mlxsw_cmd_exec_out(struct mlxsw_core *mlxsw_core, u16 opcode,
 				     char *out_mbox, size_t out_mbox_size)
 {
 	return mlxsw_cmd_exec(mlxsw_core, opcode, opcode_mod, in_mod,
-			      out_mbox_direct, NULL, 0,
+			      out_mbox_direct, false, NULL, 0,
 			      out_mbox, out_mbox_size);
 }
 
@@ -84,7 +84,7 @@  static inline int mlxsw_cmd_exec_none(struct mlxsw_core *mlxsw_core, u16 opcode,
 				      u8 opcode_mod, u32 in_mod)
 {
 	return mlxsw_cmd_exec(mlxsw_core, opcode, opcode_mod, in_mod, false,
-			      NULL, 0, NULL, 0);
+			      false, NULL, 0, NULL, 0);
 }
 
 enum mlxsw_cmd_opcode {
@@ -179,6 +179,8 @@  enum mlxsw_cmd_status {
 	MLXSW_CMD_STATUS_BAD_INDEX	= 0x0A,
 	/* NVMEM checksum/CRC failed. */
 	MLXSW_CMD_STATUS_BAD_NVMEM	= 0x0B,
+	/* Device is currently running reset */
+	MLXSW_CMD_STATUS_RUNNING_RESET	= 0x26,
 	/* Bad management packet (silently discarded). */
 	MLXSW_CMD_STATUS_BAD_PKT	= 0x30,
 };
@@ -208,6 +210,8 @@  static inline const char *mlxsw_cmd_status_str(u8 status)
 		return "BAD_INDEX";
 	case MLXSW_CMD_STATUS_BAD_NVMEM:
 		return "BAD_NVMEM";
+	case MLXSW_CMD_STATUS_RUNNING_RESET:
+		return "RUNNING_RESET";
 	case MLXSW_CMD_STATUS_BAD_PKT:
 		return "BAD_PKT";
 	default:
@@ -869,10 +873,12 @@  MLXSW_ITEM32(cmd_mbox, config_profile, cqe_version, 0xB0, 0, 8);
  */
 
 static inline int mlxsw_cmd_access_reg(struct mlxsw_core *mlxsw_core,
+				       bool reset_ok,
 				       char *in_mbox, char *out_mbox)
 {
 	return mlxsw_cmd_exec(mlxsw_core, MLXSW_CMD_OPCODE_ACCESS_REG,
-			      0, 0, false, in_mbox, MLXSW_CMD_MBOX_SIZE,
+			      0, 0, false, reset_ok,
+			      in_mbox, MLXSW_CMD_MBOX_SIZE,
 			      out_mbox, MLXSW_CMD_MBOX_SIZE);
 }
 
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core.c b/drivers/net/ethernet/mellanox/mlxsw/core.c
index e13ac3b8dff7..22828e466a95 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core.c
@@ -1480,6 +1480,7 @@  static int mlxsw_core_reg_access_cmd(struct mlxsw_core *mlxsw_core,
 {
 	enum mlxsw_emad_op_tlv_status status;
 	int err, n_retry;
+	bool reset_ok;
 	char *in_mbox, *out_mbox, *tmp;
 
 	dev_dbg(mlxsw_core->bus_info->dev, "Reg cmd access (reg_id=%x(%s),type=%s)\n",
@@ -1501,9 +1502,16 @@  static int mlxsw_core_reg_access_cmd(struct mlxsw_core *mlxsw_core,
 	tmp = in_mbox + MLXSW_EMAD_OP_TLV_LEN * sizeof(u32);
 	mlxsw_emad_pack_reg_tlv(tmp, reg, payload);
 
+	/* There is a special treatment needed for MRSR (reset) register.
+	 * The command interface will return error after the command
+	 * is executed, so tell the lower layer to expect it
+	 * and cope accordingly.
+	 */
+	reset_ok = reg->id == MLXSW_REG_MRSR_ID;
+
 	n_retry = 0;
 retry:
-	err = mlxsw_cmd_access_reg(mlxsw_core, in_mbox, out_mbox);
+	err = mlxsw_cmd_access_reg(mlxsw_core, reset_ok, in_mbox, out_mbox);
 	if (!err) {
 		err = mlxsw_emad_process_status(out_mbox, &status);
 		if (err) {
@@ -1781,7 +1789,7 @@  static void mlxsw_core_buf_dump_dbg(struct mlxsw_core *mlxsw_core,
 }
 
 int mlxsw_cmd_exec(struct mlxsw_core *mlxsw_core, u16 opcode, u8 opcode_mod,
-		   u32 in_mod, bool out_mbox_direct,
+		   u32 in_mod, bool out_mbox_direct, bool reset_ok,
 		   char *in_mbox, size_t in_mbox_size,
 		   char *out_mbox, size_t out_mbox_size)
 {
@@ -1804,7 +1812,15 @@  int mlxsw_cmd_exec(struct mlxsw_core *mlxsw_core, u16 opcode, u8 opcode_mod,
 					in_mbox, in_mbox_size,
 					out_mbox, out_mbox_size, &status);
 
-	if (err == -EIO && status != MLXSW_CMD_STATUS_OK) {
+	if (!err && out_mbox) {
+		dev_dbg(mlxsw_core->bus_info->dev, "Output mailbox:\n");
+		mlxsw_core_buf_dump_dbg(mlxsw_core, out_mbox, out_mbox_size);
+	}
+
+	if (reset_ok && err == -EIO &&
+	    status == MLXSW_CMD_STATUS_RUNNING_RESET) {
+		err = 0;
+	} else if (err == -EIO && status != MLXSW_CMD_STATUS_OK) {
 		dev_err(mlxsw_core->bus_info->dev, "Cmd exec failed (opcode=%x(%s),opcode_mod=%x,in_mod=%x,status=%x(%s))\n",
 			opcode, mlxsw_cmd_opcode_str(opcode), opcode_mod,
 			in_mod, status, mlxsw_cmd_status_str(status));
@@ -1814,10 +1830,6 @@  int mlxsw_cmd_exec(struct mlxsw_core *mlxsw_core, u16 opcode, u8 opcode_mod,
 			in_mod);
 	}
 
-	if (!err && out_mbox) {
-		dev_dbg(mlxsw_core->bus_info->dev, "Output mailbox:\n");
-		mlxsw_core_buf_dump_dbg(mlxsw_core, out_mbox, out_mbox_size);
-	}
 	return err;
 }
 EXPORT_SYMBOL(mlxsw_cmd_exec);