[net-next/mlxsw,internal,09/15] mlxsw: reg: Add Policy-Engine Region Configuration Register

Commit Message

Jiri Pirko June 14, 2018, 8:52 a.m. UTC

From: Ido Schimmel <[e-mail]>

The PERCR register configures the region parameters such as whether to
consult the bloom filter before performing a lookup using a specific
eRP.

For C-TCAM only usage we don't need to accurately set the master mask.
Instead, we can set all of its bits to make sure all the extracted keys
are actually used.

Signed-off-by: Ido Schimmel <[e-mail]>
Signed-off-by: Jiri Pirko <[e-mail]>
---
 drivers/net/ethernet/mellanox/mlxsw/reg.h | 57 +++++++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)

Patch

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 096499ab5e82..d6ac24367a60 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -2536,6 +2536,62 @@  static inline void mlxsw_reg_perar_pack(char *payload, bool inkbr,
 	mlxsw_reg_perar_hw_region_set(payload, hw_region);
 }
 
+/* PERCR - Policy-Engine Region Configuration Register
+ * ---------------------------------------------------
+ * This register configures the region parameters. The region_id must be
+ * allocated.
+ */
+#define MLXSW_REG_PERCR_ID 0x302A
+#define MLXSW_REG_PERCR_LEN 0x80
+
+MLXSW_REG_DEFINE(percr, MLXSW_REG_PERCR_ID, MLXSW_REG_PERCR_LEN);
+
+/* reg_percr_region_id
+ * Region identifier.
+ * Range 0..cap_max_regions-1
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, percr, region_id, 0x00, 0, 16);
+
+/* reg_percr_atcam_ignore_prune
+ * Ignore prune_vector by other A-TCAM rules. Used e.g., for a new rule.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, percr, atcam_ignore_prune, 0x04, 25, 1);
+
+/* reg_percr_ctcam_ignore_prune
+ * Ignore prune_ctcam by other A-TCAM rules. Used e.g., for a new rule.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, percr, ctcam_ignore_prune, 0x04, 24, 1);
+
+/* reg_percr_bf_bypass
+ * Bloom filter bypass.
+ * 0 - Bloom filter is used (default)
+ * 1 - Bloom filter is bypassed. The bypass is an OR condition of
+ * region_id or eRP. See PERPT.bf_bypass
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, percr, bf_bypass, 0x04, 16, 1);
+
+/* reg_percr_master_mask
+ * Master mask. Logical OR mask of all masks of all rules of a region
+ * (both A-TCAM and C-TCAM). When there are no eRPs
+ * (erpt_pointer_valid = 0), then this provides the mask.
+ * Access: RW
+ */
+MLXSW_ITEM_BUF(reg, percr, master_mask, 0x20, 96);
+
+static inline void mlxsw_reg_percr_pack(char *payload, u16 region_id)
+{
+	MLXSW_REG_ZERO(percr, payload);
+	mlxsw_reg_percr_region_id_set(payload, region_id);
+	mlxsw_reg_percr_atcam_ignore_prune_set(payload, false);
+	mlxsw_reg_percr_ctcam_ignore_prune_set(payload, false);
+	mlxsw_reg_percr_bf_bypass_set(payload, true);
+	memset(payload + 0x20, 0xff, 96);
+}
+
 /* IEDR - Infrastructure Entry Delete Register
  * ----------------------------------------------------
  * This register is used for deleting entries from the entry tables.
@@ -8036,6 +8092,7 @@  static const struct mlxsw_reg_info *mlxsw_reg_infos[] = {
 	MLXSW_REG(pefa),
 	MLXSW_REG(ptce2),
 	MLXSW_REG(perar),
+	MLXSW_REG(percr),
 	MLXSW_REG(iedr),
 	MLXSW_REG(qpcr),
 	MLXSW_REG(qtct),