| Message ID | 20230915172818.761-1-shiju.jose@huawei.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | ACPI:RASF: Add support for ACPI RASF, ACPI RAS2 and configure scrubbers | expand |
On Fri, Sep 15, 2023 at 10:29 AM <shiju.jose@huawei.com> wrote: > > From: Shiju Jose <shiju.jose@huawei.com> > > This series add, > 1. support for ACPI RASF(RAS feature table) PCC interfaces > to communicate with the HW patrol scrubber in the platform, > as per ACPI 5.1 & upwards revision. Section 5.2.20. > > 2. support for ACPI RAS2(RAS2 feature table), as per > ACPI 6.5 & upwards revision. Section 5.2.21. > > 3. scrub driver supports configuring parameters of the memory > scrubbers in the system. This driver has been implemented > based on the hwmon subsystem. > > The features have tested with RASF and RAS2 emulation in the QEMU. I am very curious how the test is done. Does the hw patrol scrubber on host actually been driven by the driver to scrub memory DIMMs (doesn't seem so to me, but do correct me)? Or it is like to a VM scrubbing is simulated and no real op to DIMMs? > > Previous references to the memory scub and RASF topics. > https://lore.kernel.org/all/20221103155029.2451105-1-jiaqiyan@google.com/ > https://patchwork.kernel.org/project/linux-arm-kernel/patch/CS1PR84MB0038718F49DBC0FF03919E1184390@CS1PR84MB0038.NAMPRD84.PROD.OUTLOOK.COM/ > > A Somasundaram (2): > ACPI:RASF: Add extract RASF table to register RASF platform devices > ACPI:RASF: Add common library for RASF and RAS2 PCC interfaces > > Shiju Jose (7): > memory: scrub: Add scrub driver supports configuring memory scrubbers > in the system > memory: scrub: sysfs: Add Documentation entries for set of scrub > attributes > Documentation/scrub-configure.rst: Add documentation for scrub driver > memory: RASF: Add memory RASF driver > ACPICA: ACPI 6.5: Add support for RAS2 table > ACPI:RAS2: Add driver for ACPI RAS2 feature table (RAS2) > memory: RAS2: Add memory RAS2 driver > > .../ABI/testing/sysfs-class-scrub-configure | 82 ++++ > Documentation/scrub-configure.rst | 55 +++ > drivers/acpi/Kconfig | 15 + > drivers/acpi/Makefile | 1 + > drivers/acpi/ras2_acpi.c | 97 ++++ > drivers/acpi/rasf_acpi.c | 71 +++ > drivers/acpi/rasf_acpi_common.c | 272 +++++++++++ > drivers/memory/Kconfig | 15 + > drivers/memory/Makefile | 3 + > drivers/memory/ras2.c | 334 +++++++++++++ > drivers/memory/rasf.c | 335 +++++++++++++ > drivers/memory/rasf_common.c | 251 ++++++++++ > drivers/memory/scrub/Kconfig | 11 + > drivers/memory/scrub/Makefile | 6 + > drivers/memory/scrub/memory-scrub.c | 452 ++++++++++++++++++ > include/acpi/actbl2.h | 55 +++ > include/acpi/rasf_acpi.h | 59 +++ > include/memory/memory-scrub.h | 85 ++++ > include/memory/rasf.h | 82 ++++ > 19 files changed, 2281 insertions(+) > create mode 100644 Documentation/ABI/testing/sysfs-class-scrub-configure > create mode 100644 Documentation/scrub-configure.rst > create mode 100755 drivers/acpi/ras2_acpi.c > create mode 100755 drivers/acpi/rasf_acpi.c > create mode 100755 drivers/acpi/rasf_acpi_common.c > create mode 100644 drivers/memory/ras2.c > create mode 100644 drivers/memory/rasf.c > create mode 100644 drivers/memory/rasf_common.c > create mode 100644 drivers/memory/scrub/Kconfig > create mode 100644 drivers/memory/scrub/Makefile > create mode 100755 drivers/memory/scrub/memory-scrub.c > create mode 100755 include/acpi/rasf_acpi.h > create mode 100755 include/memory/memory-scrub.h > create mode 100755 include/memory/rasf.h > > -- > 2.34.1 >
[+cc linux-edac@vger.kernel.org] Hello, >-----Original Message----- >From: Jiaqi Yan <jiaqiyan@google.com> >Sent: 17 September 2023 22:14 >To: Shiju Jose <shiju.jose@huawei.com> >Cc: linux-acpi@vger.kernel.org; linux-mm@kvack.org; linux- >kernel@vger.kernel.org; rafael@kernel.org; lenb@kernel.org; >naoya.horiguchi@nec.com; tony.luck@intel.com; james.morse@arm.com; >dave.hansen@linux.intel.com; david@redhat.com; jthoughton@google.com; >somasundaram.a@hpe.com; erdemaktas@google.com; pgonda@google.com; >rientjes@google.com; duenwen@google.com; Vilas.Sridharan@amd.com; >mike.malvestuto@intel.com; gthelen@google.com; Linuxarm ><linuxarm@huawei.com>; Jonathan Cameron ><jonathan.cameron@huawei.com>; tanxiaofei <tanxiaofei@huawei.com>; >Zengtao (B) <prime.zeng@hisilicon.com> >Subject: Re: [RFC PATCH 0/9] ACPI:RASF: Add support for ACPI RASF, ACPI RAS2 >and configure scrubbers > >On Fri, Sep 15, 2023 at 10:29 AM <shiju.jose@huawei.com> wrote: >> >> From: Shiju Jose <shiju.jose@huawei.com> >> >> This series add, >> 1. support for ACPI RASF(RAS feature table) PCC interfaces to >> communicate with the HW patrol scrubber in the platform, as per ACPI >> 5.1 & upwards revision. Section 5.2.20. >> >> 2. support for ACPI RAS2(RAS2 feature table), as per ACPI 6.5 & >> upwards revision. Section 5.2.21. >> >> 3. scrub driver supports configuring parameters of the memory >> scrubbers in the system. This driver has been implemented based on the >> hwmon subsystem. >> >> The features have tested with RASF and RAS2 emulation in the QEMU. > >I am very curious how the test is done. Does the hw patrol scrubber on host >actually been driven by the driver to scrub memory DIMMs (doesn't seem so to >me, but do correct me)? Or it is like to a VM scrubbing is simulated and no real >op to DIMMs? Intent here is hardware scrubber on host as far as we are concerned. Could be used for VM too perhaps. We did it with QEMU emulation for now to get the flexibility of configuration. However there will be other scrub controls over time, such as DDR5 ECS. https://media-www.micron.com/-/media/client/global/documents/products/white-paper/ddr5_new_features_white_paper.pdf?rev=b98f4977d9334b4aa5d0d211a92bf14a Also found there is very simple support for scrub control in edac, and an alternative path would be to look at extending that to sufficient complexity to support region based scanning. https://elixir.bootlin.com/linux/latest/source/include/linux/edac.h#L512 > >> >> Previous references to the memory scub and RASF topics. >> https://lore.kernel.org/all/20221103155029.2451105-1-jiaqiyan@google.c >> om/ >> https://patchwork.kernel.org/project/linux-arm-kernel/patch/CS1PR84MB0 >> >038718F49DBC0FF03919E1184390@CS1PR84MB0038.NAMPRD84.PROD.OUTLO >OK.COM/ >> >> A Somasundaram (2): >> ACPI:RASF: Add extract RASF table to register RASF platform devices >> ACPI:RASF: Add common library for RASF and RAS2 PCC interfaces >> >> Shiju Jose (7): >> memory: scrub: Add scrub driver supports configuring memory scrubbers >> in the system >> memory: scrub: sysfs: Add Documentation entries for set of scrub >> attributes >> Documentation/scrub-configure.rst: Add documentation for scrub driver >> memory: RASF: Add memory RASF driver >> ACPICA: ACPI 6.5: Add support for RAS2 table >> ACPI:RAS2: Add driver for ACPI RAS2 feature table (RAS2) >> memory: RAS2: Add memory RAS2 driver >> >> .../ABI/testing/sysfs-class-scrub-configure | 82 ++++ >> Documentation/scrub-configure.rst | 55 +++ >> drivers/acpi/Kconfig | 15 + >> drivers/acpi/Makefile | 1 + >> drivers/acpi/ras2_acpi.c | 97 ++++ >> drivers/acpi/rasf_acpi.c | 71 +++ >> drivers/acpi/rasf_acpi_common.c | 272 +++++++++++ >> drivers/memory/Kconfig | 15 + >> drivers/memory/Makefile | 3 + >> drivers/memory/ras2.c | 334 +++++++++++++ >> drivers/memory/rasf.c | 335 +++++++++++++ >> drivers/memory/rasf_common.c | 251 ++++++++++ >> drivers/memory/scrub/Kconfig | 11 + >> drivers/memory/scrub/Makefile | 6 + >> drivers/memory/scrub/memory-scrub.c | 452 ++++++++++++++++++ >> include/acpi/actbl2.h | 55 +++ >> include/acpi/rasf_acpi.h | 59 +++ >> include/memory/memory-scrub.h | 85 ++++ >> include/memory/rasf.h | 82 ++++ >> 19 files changed, 2281 insertions(+) >> create mode 100644 >> Documentation/ABI/testing/sysfs-class-scrub-configure >> create mode 100644 Documentation/scrub-configure.rst create mode >> 100755 drivers/acpi/ras2_acpi.c create mode 100755 >> drivers/acpi/rasf_acpi.c create mode 100755 >> drivers/acpi/rasf_acpi_common.c create mode 100644 >> drivers/memory/ras2.c create mode 100644 drivers/memory/rasf.c >> create mode 100644 drivers/memory/rasf_common.c create mode 100644 >> drivers/memory/scrub/Kconfig create mode 100644 >> drivers/memory/scrub/Makefile create mode 100755 >> drivers/memory/scrub/memory-scrub.c >> create mode 100755 include/acpi/rasf_acpi.h create mode 100755 >> include/memory/memory-scrub.h create mode 100755 >> include/memory/rasf.h >> >> -- >> 2.34.1 >> Thanks, Shiju
On Mon, Sep 18, 2023 at 3:20 AM Shiju Jose <shiju.jose@huawei.com> wrote: > > [+cc linux-edac@vger.kernel.org] > > Hello, > > >-----Original Message----- > >From: Jiaqi Yan <jiaqiyan@google.com> > >Sent: 17 September 2023 22:14 > >To: Shiju Jose <shiju.jose@huawei.com> > >Cc: linux-acpi@vger.kernel.org; linux-mm@kvack.org; linux- > >kernel@vger.kernel.org; rafael@kernel.org; lenb@kernel.org; > >naoya.horiguchi@nec.com; tony.luck@intel.com; james.morse@arm.com; > >dave.hansen@linux.intel.com; david@redhat.com; jthoughton@google.com; > >somasundaram.a@hpe.com; erdemaktas@google.com; pgonda@google.com; > >rientjes@google.com; duenwen@google.com; Vilas.Sridharan@amd.com; > >mike.malvestuto@intel.com; gthelen@google.com; Linuxarm > ><linuxarm@huawei.com>; Jonathan Cameron > ><jonathan.cameron@huawei.com>; tanxiaofei <tanxiaofei@huawei.com>; > >Zengtao (B) <prime.zeng@hisilicon.com> > >Subject: Re: [RFC PATCH 0/9] ACPI:RASF: Add support for ACPI RASF, ACPI RAS2 > >and configure scrubbers > > > >On Fri, Sep 15, 2023 at 10:29 AM <shiju.jose@huawei.com> wrote: > >> > >> From: Shiju Jose <shiju.jose@huawei.com> > >> > >> This series add, > >> 1. support for ACPI RASF(RAS feature table) PCC interfaces to > >> communicate with the HW patrol scrubber in the platform, as per ACPI > >> 5.1 & upwards revision. Section 5.2.20. > >> > >> 2. support for ACPI RAS2(RAS2 feature table), as per ACPI 6.5 & > >> upwards revision. Section 5.2.21. > >> > >> 3. scrub driver supports configuring parameters of the memory > >> scrubbers in the system. This driver has been implemented based on the > >> hwmon subsystem. > >> > >> The features have tested with RASF and RAS2 emulation in the QEMU. > > > >I am very curious how the test is done. Does the hw patrol scrubber on host > >actually been driven by the driver to scrub memory DIMMs (doesn't seem so to > >me, but do correct me)? Or it is like to a VM scrubbing is simulated and no real > >op to DIMMs? > Intent here is hardware scrubber on host as far as we are concerned. Sorry maybe my question was not clear, so let me try again. Does the driver being tested on a machine and directly or indirectly control (start/stop) hardware patrol scrubber to scrub physical memory? what are the CPU chip, memory controller, and DIMM chips? > Could be used for VM too perhaps. We did it with QEMU emulation for now > to get the flexibility of configuration. However there will be other scrub controls > over time, such as DDR5 ECS. > https://media-www.micron.com/-/media/client/global/documents/products/white-paper/ddr5_new_features_white_paper.pdf?rev=b98f4977d9334b4aa5d0d211a92bf14a > > Also found there is very simple support for scrub control in edac, and an alternative path > would be to look at extending that to sufficient complexity to support region based scanning. > https://elixir.bootlin.com/linux/latest/source/include/linux/edac.h#L512 > > > > >> > >> Previous references to the memory scub and RASF topics. > >> https://lore.kernel.org/all/20221103155029.2451105-1-jiaqiyan@google.c > >> om/ > >> https://patchwork.kernel.org/project/linux-arm-kernel/patch/CS1PR84MB0 > >> > >038718F49DBC0FF03919E1184390@CS1PR84MB0038.NAMPRD84.PROD.OUTLO > >OK.COM/ > >> > >> A Somasundaram (2): > >> ACPI:RASF: Add extract RASF table to register RASF platform devices > >> ACPI:RASF: Add common library for RASF and RAS2 PCC interfaces > >> > >> Shiju Jose (7): > >> memory: scrub: Add scrub driver supports configuring memory scrubbers > >> in the system > >> memory: scrub: sysfs: Add Documentation entries for set of scrub > >> attributes > >> Documentation/scrub-configure.rst: Add documentation for scrub driver > >> memory: RASF: Add memory RASF driver > >> ACPICA: ACPI 6.5: Add support for RAS2 table > >> ACPI:RAS2: Add driver for ACPI RAS2 feature table (RAS2) > >> memory: RAS2: Add memory RAS2 driver > >> > >> .../ABI/testing/sysfs-class-scrub-configure | 82 ++++ > >> Documentation/scrub-configure.rst | 55 +++ > >> drivers/acpi/Kconfig | 15 + > >> drivers/acpi/Makefile | 1 + > >> drivers/acpi/ras2_acpi.c | 97 ++++ > >> drivers/acpi/rasf_acpi.c | 71 +++ > >> drivers/acpi/rasf_acpi_common.c | 272 +++++++++++ > >> drivers/memory/Kconfig | 15 + > >> drivers/memory/Makefile | 3 + > >> drivers/memory/ras2.c | 334 +++++++++++++ > >> drivers/memory/rasf.c | 335 +++++++++++++ > >> drivers/memory/rasf_common.c | 251 ++++++++++ > >> drivers/memory/scrub/Kconfig | 11 + > >> drivers/memory/scrub/Makefile | 6 + > >> drivers/memory/scrub/memory-scrub.c | 452 ++++++++++++++++++ > >> include/acpi/actbl2.h | 55 +++ > >> include/acpi/rasf_acpi.h | 59 +++ > >> include/memory/memory-scrub.h | 85 ++++ > >> include/memory/rasf.h | 82 ++++ > >> 19 files changed, 2281 insertions(+) > >> create mode 100644 > >> Documentation/ABI/testing/sysfs-class-scrub-configure > >> create mode 100644 Documentation/scrub-configure.rst create mode > >> 100755 drivers/acpi/ras2_acpi.c create mode 100755 > >> drivers/acpi/rasf_acpi.c create mode 100755 > >> drivers/acpi/rasf_acpi_common.c create mode 100644 > >> drivers/memory/ras2.c create mode 100644 drivers/memory/rasf.c > >> create mode 100644 drivers/memory/rasf_common.c create mode 100644 > >> drivers/memory/scrub/Kconfig create mode 100644 > >> drivers/memory/scrub/Makefile create mode 100755 > >> drivers/memory/scrub/memory-scrub.c > >> create mode 100755 include/acpi/rasf_acpi.h create mode 100755 > >> include/memory/memory-scrub.h create mode 100755 > >> include/memory/rasf.h > >> > >> -- > >> 2.34.1 > >> > > Thanks, > Shiju
>-----Original Message----- >From: Jiaqi Yan <jiaqiyan@google.com> >Sent: 18 September 2023 18:47 >To: Shiju Jose <shiju.jose@huawei.com> >Cc: linux-acpi@vger.kernel.org; linux-mm@kvack.org; linux- >kernel@vger.kernel.org; rafael@kernel.org; lenb@kernel.org; >naoya.horiguchi@nec.com; tony.luck@intel.com; james.morse@arm.com; >dave.hansen@linux.intel.com; david@redhat.com; jthoughton@google.com; >somasundaram.a@hpe.com; erdemaktas@google.com; pgonda@google.com; >rientjes@google.com; duenwen@google.com; Vilas.Sridharan@amd.com; >mike.malvestuto@intel.com; gthelen@google.com; Linuxarm ><linuxarm@huawei.com>; Jonathan Cameron ><jonathan.cameron@huawei.com>; tanxiaofei <tanxiaofei@huawei.com>; >Zengtao (B) <prime.zeng@hisilicon.com>; bp@alien8.de; mchehab@kernel.org; >rric@kernel.org; linux-edac@vger.kernel.org >Subject: Re: [RFC PATCH 0/9] ACPI:RASF: Add support for ACPI RASF, ACPI RAS2 >and configure scrubbers > >On Mon, Sep 18, 2023 at 3:20 AM Shiju Jose <shiju.jose@huawei.com> wrote: >> >> [+cc linux-edac@vger.kernel.org] >> >> Hello, >> >> >-----Original Message----- >> >From: Jiaqi Yan <jiaqiyan@google.com> >> >Sent: 17 September 2023 22:14 >> >To: Shiju Jose <shiju.jose@huawei.com> >> >Cc: linux-acpi@vger.kernel.org; linux-mm@kvack.org; linux- >> >kernel@vger.kernel.org; rafael@kernel.org; lenb@kernel.org; >> >naoya.horiguchi@nec.com; tony.luck@intel.com; james.morse@arm.com; >> >dave.hansen@linux.intel.com; david@redhat.com; jthoughton@google.com; >> >somasundaram.a@hpe.com; erdemaktas@google.com; >pgonda@google.com; >> >rientjes@google.com; duenwen@google.com; Vilas.Sridharan@amd.com; >> >mike.malvestuto@intel.com; gthelen@google.com; Linuxarm >> ><linuxarm@huawei.com>; Jonathan Cameron >> ><jonathan.cameron@huawei.com>; tanxiaofei <tanxiaofei@huawei.com>; >> >Zengtao (B) <prime.zeng@hisilicon.com> >> >Subject: Re: [RFC PATCH 0/9] ACPI:RASF: Add support for ACPI RASF, >> >ACPI RAS2 and configure scrubbers >> > >> >On Fri, Sep 15, 2023 at 10:29 AM <shiju.jose@huawei.com> wrote: >> >> >> >> From: Shiju Jose <shiju.jose@huawei.com> >> >> >> >> This series add, >> >> 1. support for ACPI RASF(RAS feature table) PCC interfaces to >> >> communicate with the HW patrol scrubber in the platform, as per >> >> ACPI >> >> 5.1 & upwards revision. Section 5.2.20. >> >> >> >> 2. support for ACPI RAS2(RAS2 feature table), as per ACPI 6.5 & >> >> upwards revision. Section 5.2.21. >> >> >> >> 3. scrub driver supports configuring parameters of the memory >> >> scrubbers in the system. This driver has been implemented based on >> >> the hwmon subsystem. >> >> >> >> The features have tested with RASF and RAS2 emulation in the QEMU. >> > >> >I am very curious how the test is done. Does the hw patrol scrubber >> >on host actually been driven by the driver to scrub memory DIMMs >> >(doesn't seem so to me, but do correct me)? Or it is like to a VM >> >scrubbing is simulated and no real op to DIMMs? >> Intent here is hardware scrubber on host as far as we are concerned. > >Sorry maybe my question was not clear, so let me try again. > >Does the driver being tested on a machine and directly or indirectly control >(start/stop) hardware patrol scrubber to scrub physical memory? what are the >CPU chip, memory controller, and DIMM chips? The driver has been tested with qemu_system_aarch64 with state machine to emulate the RASF and RAS2 tables support for configuring parameters of a patrol scrubber. Thus no real HW patrol scrubber and DIMM involved in the testing. > >> Could be used for VM too perhaps. We did it with QEMU emulation for >> now to get the flexibility of configuration. However there will be >> other scrub controls over time, such as DDR5 ECS. >> https://media-www.micron.com/-/media/client/global/documents/products/ >> white- >paper/ddr5_new_features_white_paper.pdf?rev=b98f4977d9334b4aa5d0 >> d211a92bf14a >> >> Also found there is very simple support for scrub control in edac, and Thanks, Shiju
From: Shiju Jose <shiju.jose@huawei.com> This series add, 1. support for ACPI RASF(RAS feature table) PCC interfaces to communicate with the HW patrol scrubber in the platform, as per ACPI 5.1 & upwards revision. Section 5.2.20. 2. support for ACPI RAS2(RAS2 feature table), as per ACPI 6.5 & upwards revision. Section 5.2.21. 3. scrub driver supports configuring parameters of the memory scrubbers in the system. This driver has been implemented based on the hwmon subsystem. The features have tested with RASF and RAS2 emulation in the QEMU. Previous references to the memory scub and RASF topics. https://lore.kernel.org/all/20221103155029.2451105-1-jiaqiyan@google.com/ https://patchwork.kernel.org/project/linux-arm-kernel/patch/CS1PR84MB0038718F49DBC0FF03919E1184390@CS1PR84MB0038.NAMPRD84.PROD.OUTLOOK.COM/ A Somasundaram (2): ACPI:RASF: Add extract RASF table to register RASF platform devices ACPI:RASF: Add common library for RASF and RAS2 PCC interfaces Shiju Jose (7): memory: scrub: Add scrub driver supports configuring memory scrubbers in the system memory: scrub: sysfs: Add Documentation entries for set of scrub attributes Documentation/scrub-configure.rst: Add documentation for scrub driver memory: RASF: Add memory RASF driver ACPICA: ACPI 6.5: Add support for RAS2 table ACPI:RAS2: Add driver for ACPI RAS2 feature table (RAS2) memory: RAS2: Add memory RAS2 driver .../ABI/testing/sysfs-class-scrub-configure | 82 ++++ Documentation/scrub-configure.rst | 55 +++ drivers/acpi/Kconfig | 15 + drivers/acpi/Makefile | 1 + drivers/acpi/ras2_acpi.c | 97 ++++ drivers/acpi/rasf_acpi.c | 71 +++ drivers/acpi/rasf_acpi_common.c | 272 +++++++++++ drivers/memory/Kconfig | 15 + drivers/memory/Makefile | 3 + drivers/memory/ras2.c | 334 +++++++++++++ drivers/memory/rasf.c | 335 +++++++++++++ drivers/memory/rasf_common.c | 251 ++++++++++ drivers/memory/scrub/Kconfig | 11 + drivers/memory/scrub/Makefile | 6 + drivers/memory/scrub/memory-scrub.c | 452 ++++++++++++++++++ include/acpi/actbl2.h | 55 +++ include/acpi/rasf_acpi.h | 59 +++ include/memory/memory-scrub.h | 85 ++++ include/memory/rasf.h | 82 ++++ 19 files changed, 2281 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-class-scrub-configure create mode 100644 Documentation/scrub-configure.rst create mode 100755 drivers/acpi/ras2_acpi.c create mode 100755 drivers/acpi/rasf_acpi.c create mode 100755 drivers/acpi/rasf_acpi_common.c create mode 100644 drivers/memory/ras2.c create mode 100644 drivers/memory/rasf.c create mode 100644 drivers/memory/rasf_common.c create mode 100644 drivers/memory/scrub/Kconfig create mode 100644 drivers/memory/scrub/Makefile create mode 100755 drivers/memory/scrub/memory-scrub.c create mode 100755 include/acpi/rasf_acpi.h create mode 100755 include/memory/memory-scrub.h create mode 100755 include/memory/rasf.h