diff mbox

mm/memblock: add missing include <linux/bootmem.h> and #ifdef

Message ID 20180622210542.2025-1-malat@debian.org (mailing list archive)
State New, archived
Headers show

Commit Message

Mathieu Malaterre June 22, 2018, 9:05 p.m. UTC
Commit 26f09e9b3a06 ("mm/memblock: add memblock memory allocation apis")
introduced two new function definitions:

  memblock_virt_alloc_try_nid_nopanic()
  memblock_virt_alloc_try_nid()

Commit ea1f5f3712af ("mm: define memblock_virt_alloc_try_nid_raw")
introduced the following function definition:

  memblock_virt_alloc_try_nid_raw()

This commit adds an include of header file <linux/bootmem.h> to provide
the missing function prototypes. Silence the following gcc warning
(W=1):

  mm/memblock.c:1334:15: warning: no previous prototype for `memblock_virt_alloc_try_nid_raw' [-Wmissing-prototypes]
  mm/memblock.c:1371:15: warning: no previous prototype for `memblock_virt_alloc_try_nid_nopanic' [-Wmissing-prototypes]
  mm/memblock.c:1407:15: warning: no previous prototype for `memblock_virt_alloc_try_nid' [-Wmissing-prototypes]

As seen in commit 6cc22dc08a24 ("revert "mm/memblock: add missing include
<linux/bootmem.h>"") #ifdef blockers were missing which lead to compilation
failure on mips/ia64 where CONFIG_NO_BOOTMEM=n.

Suggested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
 mm/memblock.c | 3 +++
 1 file changed, 3 insertions(+)

Comments

Michal Hocko June 25, 2018, 2:03 p.m. UTC | #1
On Fri 22-06-18 23:05:41, Mathieu Malaterre wrote:
> Commit 26f09e9b3a06 ("mm/memblock: add memblock memory allocation apis")
> introduced two new function definitions:
> 
>   memblock_virt_alloc_try_nid_nopanic()
>   memblock_virt_alloc_try_nid()
> 
> Commit ea1f5f3712af ("mm: define memblock_virt_alloc_try_nid_raw")
> introduced the following function definition:
> 
>   memblock_virt_alloc_try_nid_raw()
> 
> This commit adds an include of header file <linux/bootmem.h> to provide
> the missing function prototypes. Silence the following gcc warning
> (W=1):
> 
>   mm/memblock.c:1334:15: warning: no previous prototype for `memblock_virt_alloc_try_nid_raw' [-Wmissing-prototypes]
>   mm/memblock.c:1371:15: warning: no previous prototype for `memblock_virt_alloc_try_nid_nopanic' [-Wmissing-prototypes]
>   mm/memblock.c:1407:15: warning: no previous prototype for `memblock_virt_alloc_try_nid' [-Wmissing-prototypes]
> 
> As seen in commit 6cc22dc08a24 ("revert "mm/memblock: add missing include
> <linux/bootmem.h>"") #ifdef blockers were missing which lead to compilation
> failure on mips/ia64 where CONFIG_NO_BOOTMEM=n.
> 
> Suggested-by: Tony Luck <tony.luck@intel.com>
> Signed-off-by: Mathieu Malaterre <malat@debian.org>

I was not aware of -Wmissing-prototypes

> ---
>  mm/memblock.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/mm/memblock.c b/mm/memblock.c
> index 4c98672bc3e2..f4b6766d7907 100644
> --- a/mm/memblock.c
> +++ b/mm/memblock.c
> @@ -20,6 +20,7 @@
>  #include <linux/kmemleak.h>
>  #include <linux/seq_file.h>
>  #include <linux/memblock.h>
> +#include <linux/bootmem.h>
>  
>  #include <asm/sections.h>
>  #include <linux/io.h>
> @@ -1226,6 +1227,7 @@ phys_addr_t __init memblock_alloc_try_nid(phys_addr_t size, phys_addr_t align, i
>  	return memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE);
>  }
>  
> +#if defined(CONFIG_HAVE_MEMBLOCK) && defined(CONFIG_NO_BOOTMEM)

Why do you need CONFIG_HAVE_MEMBLOCK dependency?
mm/Makefile says
obj-$(CONFIG_HAVE_MEMBLOCK) += memblock.o

so we even do not compile this code for !HAVE_MEMBLOCK AFAICS.

>  /**
>   * memblock_virt_alloc_internal - allocate boot memory block
>   * @size: size of memory block to be allocated in bytes
> @@ -1433,6 +1435,7 @@ void * __init memblock_virt_alloc_try_nid(
>  	      (u64)max_addr);
>  	return NULL;
>  }
> +#endif
>  
>  /**
>   * __memblock_free_early - free boot memory block
> -- 
> 2.11.0
Mathieu Malaterre June 25, 2018, 2:26 p.m. UTC | #2
On Mon, Jun 25, 2018 at 4:03 PM Michal Hocko <mhocko@kernel.org> wrote:
>
> On Fri 22-06-18 23:05:41, Mathieu Malaterre wrote:
> > Commit 26f09e9b3a06 ("mm/memblock: add memblock memory allocation apis")
> > introduced two new function definitions:
> >
> >   memblock_virt_alloc_try_nid_nopanic()
> >   memblock_virt_alloc_try_nid()
> >
> > Commit ea1f5f3712af ("mm: define memblock_virt_alloc_try_nid_raw")
> > introduced the following function definition:
> >
> >   memblock_virt_alloc_try_nid_raw()
> >
> > This commit adds an include of header file <linux/bootmem.h> to provide
> > the missing function prototypes. Silence the following gcc warning
> > (W=1):
> >
> >   mm/memblock.c:1334:15: warning: no previous prototype for `memblock_virt_alloc_try_nid_raw' [-Wmissing-prototypes]
> >   mm/memblock.c:1371:15: warning: no previous prototype for `memblock_virt_alloc_try_nid_nopanic' [-Wmissing-prototypes]
> >   mm/memblock.c:1407:15: warning: no previous prototype for `memblock_virt_alloc_try_nid' [-Wmissing-prototypes]
> >
> > As seen in commit 6cc22dc08a24 ("revert "mm/memblock: add missing include
> > <linux/bootmem.h>"") #ifdef blockers were missing which lead to compilation
> > failure on mips/ia64 where CONFIG_NO_BOOTMEM=n.
> >
> > Suggested-by: Tony Luck <tony.luck@intel.com>
> > Signed-off-by: Mathieu Malaterre <malat@debian.org>
>
> I was not aware of -Wmissing-prototypes

(not tested) sparse would report something like:

symbol 'memblock_virt_alloc_try_nid_raw' was not declared. Should it be static?

> > ---
> >  mm/memblock.c | 3 +++
> >  1 file changed, 3 insertions(+)
> >
> > diff --git a/mm/memblock.c b/mm/memblock.c
> > index 4c98672bc3e2..f4b6766d7907 100644
> > --- a/mm/memblock.c
> > +++ b/mm/memblock.c
> > @@ -20,6 +20,7 @@
> >  #include <linux/kmemleak.h>
> >  #include <linux/seq_file.h>
> >  #include <linux/memblock.h>
> > +#include <linux/bootmem.h>
> >
> >  #include <asm/sections.h>
> >  #include <linux/io.h>
> > @@ -1226,6 +1227,7 @@ phys_addr_t __init memblock_alloc_try_nid(phys_addr_t size, phys_addr_t align, i
> >       return memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE);
> >  }
> >
> > +#if defined(CONFIG_HAVE_MEMBLOCK) && defined(CONFIG_NO_BOOTMEM)
>
> Why do you need CONFIG_HAVE_MEMBLOCK dependency?
> mm/Makefile says
> obj-$(CONFIG_HAVE_MEMBLOCK) += memblock.o
>
> so we even do not compile this code for !HAVE_MEMBLOCK AFAICS.

Right, that can be simplified. I took it directly from Tony. I
originally found it more readable since it matched sentinels used for
the prototypes in <linux/bootmem.h>

$ grep -B 7 memblock_virt_alloc_try_nid_raw include/linux/bootmem.h | head -1
#if defined(CONFIG_HAVE_MEMBLOCK) && defined(CONFIG_NO_BOOTMEM)

I'll send a v2 shortly.

> >  /**
> >   * memblock_virt_alloc_internal - allocate boot memory block
> >   * @size: size of memory block to be allocated in bytes
> > @@ -1433,6 +1435,7 @@ void * __init memblock_virt_alloc_try_nid(
> >             (u64)max_addr);
> >       return NULL;
> >  }
> > +#endif
> >
> >  /**
> >   * __memblock_free_early - free boot memory block
> > --
> > 2.11.0
>
> --
> Michal Hocko
> SUSE Labs
diff mbox

Patch

diff --git a/mm/memblock.c b/mm/memblock.c
index 4c98672bc3e2..f4b6766d7907 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -20,6 +20,7 @@ 
 #include <linux/kmemleak.h>
 #include <linux/seq_file.h>
 #include <linux/memblock.h>
+#include <linux/bootmem.h>
 
 #include <asm/sections.h>
 #include <linux/io.h>
@@ -1226,6 +1227,7 @@  phys_addr_t __init memblock_alloc_try_nid(phys_addr_t size, phys_addr_t align, i
 	return memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE);
 }
 
+#if defined(CONFIG_HAVE_MEMBLOCK) && defined(CONFIG_NO_BOOTMEM)
 /**
  * memblock_virt_alloc_internal - allocate boot memory block
  * @size: size of memory block to be allocated in bytes
@@ -1433,6 +1435,7 @@  void * __init memblock_virt_alloc_try_nid(
 	      (u64)max_addr);
 	return NULL;
 }
+#endif
 
 /**
  * __memblock_free_early - free boot memory block