diff mbox series

mm, memcg: Do not high throttle allocators based on wraparound

Message ID 20200331152424.GA1019937@chrisdown.name (mailing list archive)
State New, archived
Headers show
Series mm, memcg: Do not high throttle allocators based on wraparound | expand

Commit Message

Chris Down March 31, 2020, 3:24 p.m. UTC 
From: Jakub Kicinski <kuba@kernel.org>

If a cgroup violates its memory.high constraints, we may end
up unduly penalising it. For example, for the following hierarchy:

A:   max high, 20 usage
A/B: 9 high, 10 usage
A/C: max high, 10 usage

We would end up doing the following calculation below when calculating
high delay for A/B:

A/B: 10 - 9 = 1...
A:   20 - PAGE_COUNTER_MAX = 21, so set max_overage to 21.

This gets worse with higher disparities in usage in the parent.

I have no idea how this disappeared from the final version of the patch,
but it is certainly Not Good(tm). This wasn't obvious in testing
because, for a simple cgroup hierarchy with only one child, the result
is usually roughly the same. It's only in more complex hierarchies that
things go really awry (although still, the effects are limited to a
maximum of 2 seconds in schedule_timeout_killable at a maximum).

[chris@chrisdown.name: changelog]

Fixes: e26733e0d0ec ("mm, memcg: throttle allocators based on ancestral memory.high")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Chris Down <chris@chrisdown.name>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: stable@vger.kernel.org # 5.4.x
---
 mm/memcontrol.c | 3 +++
 1 file changed, 3 insertions(+)

Comments

Chris Down March 31, 2020, 3:25 p.m. UTC | #1 
Andrew, this is a pretty bad one that could definitely affect memory.high 
users. We should probably expedite it going in.

Sorry for the trouble, especially on a -stable patch...
Michal Hocko March 31, 2020, 3:57 p.m. UTC | #2 
On Tue 31-03-20 16:24:24, Chris Down wrote:
> From: Jakub Kicinski <kuba@kernel.org>
> 
> If a cgroup violates its memory.high constraints, we may end
> up unduly penalising it. For example, for the following hierarchy:
> 
> A:   max high, 20 usage
> A/B: 9 high, 10 usage
> A/C: max high, 10 usage
> 
> We would end up doing the following calculation below when calculating
> high delay for A/B:
> 
> A/B: 10 - 9 = 1...
> A:   20 - PAGE_COUNTER_MAX = 21, so set max_overage to 21.
> 
> This gets worse with higher disparities in usage in the parent.
> 
> I have no idea how this disappeared from the final version of the patch,
> but it is certainly Not Good(tm). This wasn't obvious in testing
> because, for a simple cgroup hierarchy with only one child, the result
> is usually roughly the same. It's only in more complex hierarchies that
> things go really awry (although still, the effects are limited to a
> maximum of 2 seconds in schedule_timeout_killable at a maximum).

I find this paragraph rather confusing. This is essentially an unsigned
underflow when any of the memcg up the hierarchy is below the high
limit, right?  There doesn't really seem anything complex in such a
hierarchy.

> [chris@chrisdown.name: changelog]
> 
> Fixes: e26733e0d0ec ("mm, memcg: throttle allocators based on ancestral memory.high")
> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
> Signed-off-by: Chris Down <chris@chrisdown.name>
> Cc: Johannes Weiner <hannes@cmpxchg.org>
> Cc: stable@vger.kernel.org # 5.4.x

To the patch
Acked-by: Michal Hocko <mhocko@suse.com>

> ---
>  mm/memcontrol.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/mm/memcontrol.c b/mm/memcontrol.c
> index eecf003b0c56..75a978307863 100644
> --- a/mm/memcontrol.c
> +++ b/mm/memcontrol.c
> @@ -2336,6 +2336,9 @@ static unsigned long calculate_high_delay(struct mem_cgroup *memcg,
>  		usage = page_counter_read(&memcg->memory);
>  		high = READ_ONCE(memcg->high);
>  
> +		if (usage <= high)
> +			continue;
> +
>  		/*
>  		 * Prevent division by 0 in overage calculation by acting as if
>  		 * it was a threshold of 1 page
> -- 
> 2.26.0
>
Chris Down March 31, 2020, 5:04 p.m. UTC | #3 
Michal Hocko writes:
>I find this paragraph rather confusing. This is essentially an unsigned
>underflow when any of the memcg up the hierarchy is below the high
>limit, right?  There doesn't really seem anything complex in such a
>hierarchy.

The conditions to trigger the bug itself are easy, but having it obviously 
visible in tests requires a moderately complex hierarchy, since in the basic 
case ancestor_usage is "similar enough" to the test leaf cgroup's usage.
Chris Down March 31, 2020, 7 p.m. UTC | #4 
Chris Down writes:
>Michal Hocko writes:
>>I find this paragraph rather confusing. This is essentially an unsigned
>>underflow when any of the memcg up the hierarchy is below the high
>>limit, right?  There doesn't really seem anything complex in such a
>>hierarchy.
>
>The conditions to trigger the bug itself are easy, but having it 
>obviously visible in tests requires a moderately complex hierarchy, 
>since in the basic case ancestor_usage is "similar enough" to the test 
>leaf cgroup's usage.

Here is another reason why this wasn't caught -- division usually renders the 
overage 0 anyway with such a large input.

With the attached patch applied before this fix, you can see that usually 
division results in an overage of 0, so the result is the same. Here's an 
example where pid 213 is a cgroup in system.slice/foo.service hitting its own 
memory.high, and system.slice has no memory.high configuresd:

	[root@ktst ~]# cat /sys/kernel/debug/tracing/trace
	# tracer: nop
	#
	# entries-in-buffer/entries-written: 33/33   #P:4
	#
	#                              _-----=> irqs-off
	#                             / _----=> need-resched
	#                            | / _---=> hardirq/softirq
	#                            || / _--=> preempt-depth
	#                            ||| /     delay
	#           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
	#              | |       |   ||||       |         |
		(bash)-213   [002] .N..    58.873988: mem_cgroup_handle_over_high: usage: 32, high: 1
		(bash)-213   [002] .N..    58.873993: mem_cgroup_handle_over_high: 1 overage before shifting (31)
		(bash)-213   [002] .N..    58.873994: mem_cgroup_handle_over_high: 1 overage after shifting (32505856)
		(bash)-213   [002] .N..    58.873995: mem_cgroup_handle_over_high: 1 overage after div (32505856)
		(bash)-213   [002] .N..    58.873996: mem_cgroup_handle_over_high: 1 cgroup new overage (32505856)
		(bash)-213   [002] .N..    58.873998: mem_cgroup_handle_over_high: usage: 18641, high: 2251799813685247
		(bash)-213   [002] .N..    58.873998: mem_cgroup_handle_over_high: 2 overage before shifting (18444492273895885010)
		(bash)-213   [002] .N..    58.873999: mem_cgroup_handle_over_high: 2 overage after shifting (19547553792)
		(bash)-213   [002] .N..    58.874000: mem_cgroup_handle_over_high: 2 overage after div (0)
		(bash)-213   [002] .N..    58.874001: mem_cgroup_handle_over_high: 2 cgroup too low (0)
		(bash)-213   [002] .N..    58.874002: mem_cgroup_handle_over_high: Used 1 from leaf to get result
From df96928bc8d482d8b26c277c4ca0b075783c7aed Mon Sep 17 00:00:00 2001
From: Chris Down <chris@chrisdown.name>
Date: Tue, 31 Mar 2020 19:16:23 +0100
Subject: [PATCH] temp

---
 mm/memcontrol.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index eecf003b0c56..c33e317c3667 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -2328,11 +2328,14 @@ static unsigned long calculate_high_delay(struct mem_cgroup *memcg,
 {
 	unsigned long penalty_jiffies;
 	u64 max_overage = 0;
+	int i = 0, i_overage = 0;
 
 	do {
 		unsigned long usage, high;
 		u64 overage;
 
+		i++;
+
 		usage = page_counter_read(&memcg->memory);
 		high = READ_ONCE(memcg->high);
 
@@ -2342,18 +2345,29 @@ static unsigned long calculate_high_delay(struct mem_cgroup *memcg,
 		 */
 		high = max(high, 1UL);
 
+		trace_printk("usage: %lu, high: %lu\n", usage, high);
 		overage = usage - high;
+		trace_printk("%d overage before shifting (%llu)\n", i, overage);
 		overage <<= MEMCG_DELAY_PRECISION_SHIFT;
+		trace_printk("%d overage after shifting (%llu)\n", i, overage);
 		overage = div64_u64(overage, high);
+		trace_printk("%d overage after div (%llu)\n", i, overage);
 
-		if (overage > max_overage)
+		if (overage > max_overage) {
+			trace_printk("%d cgroup new overage (%llu)\n", i, overage);
+			i_overage = i;
 			max_overage = overage;
+		} else {
+			trace_printk("%d cgroup too low (%llu)\n", i, overage);
+		}
 	} while ((memcg = parent_mem_cgroup(memcg)) &&
 		 !mem_cgroup_is_root(memcg));
 
 	if (!max_overage)
 		return 0;
 
+	trace_printk("Used %d from leaf to get result\n", i_overage);
+
 	/*
 	 * We use overage compared to memory.high to calculate the number of
 	 * jiffies to sleep (penalty_jiffies). Ideally this value should be
Johannes Weiner April 15, 2020, 4:39 a.m. UTC | #5 
On Tue, Mar 31, 2020 at 04:24:24PM +0100, Chris Down wrote:
> From: Jakub Kicinski <kuba@kernel.org>
> 
> If a cgroup violates its memory.high constraints, we may end
> up unduly penalising it. For example, for the following hierarchy:
> 
> A:   max high, 20 usage
> A/B: 9 high, 10 usage
> A/C: max high, 10 usage
> 
> We would end up doing the following calculation below when calculating
> high delay for A/B:
> 
> A/B: 10 - 9 = 1...
> A:   20 - PAGE_COUNTER_MAX = 21, so set max_overage to 21.
> 
> This gets worse with higher disparities in usage in the parent.
> 
> I have no idea how this disappeared from the final version of the patch,
> but it is certainly Not Good(tm). This wasn't obvious in testing
> because, for a simple cgroup hierarchy with only one child, the result
> is usually roughly the same. It's only in more complex hierarchies that
> things go really awry (although still, the effects are limited to a
> maximum of 2 seconds in schedule_timeout_killable at a maximum).
> 
> [chris@chrisdown.name: changelog]
> 
> Fixes: e26733e0d0ec ("mm, memcg: throttle allocators based on ancestral memory.high")
> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
> Signed-off-by: Chris Down <chris@chrisdown.name>
> Cc: Johannes Weiner <hannes@cmpxchg.org>
> Cc: stable@vger.kernel.org # 5.4.x

Oops.

Acked-by: Johannes Weiner <hannes@cmpxchg.org>
diff mbox series

Patch

diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index eecf003b0c56..75a978307863 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -2336,6 +2336,9 @@  static unsigned long calculate_high_delay(struct mem_cgroup *memcg,
 		usage = page_counter_read(&memcg->memory);
 		high = READ_ONCE(memcg->high);
 
+		if (usage <= high)
+			continue;
+
 		/*
 		 * Prevent division by 0 in overage calculation by acting as if
 		 * it was a threshold of 1 page