diff mbox series

[4/9] mm, slub: make remaining slub_debug related attributes read-only

Message ID 20200610163135.17364-5-vbabka@suse.cz (mailing list archive)
State New, archived
Headers show
Series slub_debug fixes and improvements | expand

Commit Message

Vlastimil Babka June 10, 2020, 4:31 p.m. UTC 
SLUB_DEBUG creates several files under /sys/kernel/slab/<cache>/ that can be
read to check if the respective debugging options are enabled for given cache.
Some options, namely sanity_checks, trace, and failslab can be also enabled and
disabled at runtime by writing into the files.

The runtime toggling is racy. Some options disable __CMPXCHG_DOUBLE when
enabled, which means that in case of concurrent allocations, some can still use
__CMPXCHG_DOUBLE and some not, leading to potential corruption. The s->flags
field is also not updated or checked atomically. The simplest solution is to
remove the runtime toggling. The extended slub_debug boot parameter syntax
introduced by earlier patch should allow to fine-tune the debugging
configuration during boot with same granularity.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Roman Gushchin <guro@fb.com>
---
 Documentation/vm/slub.rst |  7 ++---
 mm/slub.c                 | 62 ++-------------------------------------
 2 files changed, 5 insertions(+), 64 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/vm/slub.rst b/Documentation/vm/slub.rst
index 36241dfba024..289d231cee97 100644
--- a/Documentation/vm/slub.rst
+++ b/Documentation/vm/slub.rst
@@ -116,11 +116,8 @@  If the file contains 1, the option is enabled, 0 means disabled. The debug
 	T	trace
 	A	failslab
 
-The sanity_checks, trace and failslab files are writable, so writing 1 or 0
-will enable or disable the option at runtime. The writes to trace and failslab
-may return -EINVAL if the cache is subject to slab merging. Careful with
-tracing: It may spew out lots of information and never stop if used on the
-wrong slab.
+Careful with tracing: It may spew out lots of information and never stop if
+used on the wrong slab.
 
 Slab merging
 ============
diff --git a/mm/slub.c b/mm/slub.c
index c5f3f2424392..0108829838e7 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -5056,20 +5056,6 @@  static ssize_t show_slab_objects(struct kmem_cache *s,
 	return x + sprintf(buf + x, "\n");
 }
 
-#ifdef CONFIG_SLUB_DEBUG
-static int any_slab_objects(struct kmem_cache *s)
-{
-	int node;
-	struct kmem_cache_node *n;
-
-	for_each_kmem_cache_node(s, node, n)
-		if (atomic_long_read(&n->total_objects))
-			return 1;
-
-	return 0;
-}
-#endif
-
 #define to_slab_attr(n) container_of(n, struct slab_attribute, attr)
 #define to_slab(n) container_of(n, struct kmem_cache, kobj)
 
@@ -5291,43 +5277,13 @@  static ssize_t sanity_checks_show(struct kmem_cache *s, char *buf)
 {
 	return sprintf(buf, "%d\n", !!(s->flags & SLAB_CONSISTENCY_CHECKS));
 }
-
-static ssize_t sanity_checks_store(struct kmem_cache *s,
-				const char *buf, size_t length)
-{
-	s->flags &= ~SLAB_CONSISTENCY_CHECKS;
-	if (buf[0] == '1') {
-		s->flags &= ~__CMPXCHG_DOUBLE;
-		s->flags |= SLAB_CONSISTENCY_CHECKS;
-	}
-	return length;
-}
-SLAB_ATTR(sanity_checks);
+SLAB_ATTR_RO(sanity_checks);
 
 static ssize_t trace_show(struct kmem_cache *s, char *buf)
 {
 	return sprintf(buf, "%d\n", !!(s->flags & SLAB_TRACE));
 }
-
-static ssize_t trace_store(struct kmem_cache *s, const char *buf,
-							size_t length)
-{
-	/*
-	 * Tracing a merged cache is going to give confusing results
-	 * as well as cause other issues like converting a mergeable
-	 * cache into an umergeable one.
-	 */
-	if (s->refcount > 1)
-		return -EINVAL;
-
-	s->flags &= ~SLAB_TRACE;
-	if (buf[0] == '1') {
-		s->flags &= ~__CMPXCHG_DOUBLE;
-		s->flags |= SLAB_TRACE;
-	}
-	return length;
-}
-SLAB_ATTR(trace);
+SLAB_ATTR_RO(trace);
 
 static ssize_t red_zone_show(struct kmem_cache *s, char *buf)
 {
@@ -5391,19 +5347,7 @@  static ssize_t failslab_show(struct kmem_cache *s, char *buf)
 {
 	return sprintf(buf, "%d\n", !!(s->flags & SLAB_FAILSLAB));
 }
-
-static ssize_t failslab_store(struct kmem_cache *s, const char *buf,
-							size_t length)
-{
-	if (s->refcount > 1)
-		return -EINVAL;
-
-	s->flags &= ~SLAB_FAILSLAB;
-	if (buf[0] == '1')
-		s->flags |= SLAB_FAILSLAB;
-	return length;
-}
-SLAB_ATTR(failslab);
+SLAB_ATTR_RO(failslab);
 #endif
 
 static ssize_t shrink_show(struct kmem_cache *s, char *buf)