diff mbox series

[tip/core/rcu,02/26] mm/mmap.c: Add cond_resched() for exit_mmap() CPU stalls

Message ID 20200623002147.25750-2-paulmck@kernel.org (mailing list archive)
State New, archived
Headers show
Series None | expand

Commit Message

Paul E. McKenney June 23, 2020, 12:21 a.m. UTC
From: "Paul E. McKenney" <paulmck@kernel.org>

A large process running on a heavily loaded system can encounter the
following RCU CPU stall warning:

  rcu: INFO: rcu_sched self-detected stall on CPU
  rcu: \x093-....: (20998 ticks this GP) idle=4ea/1/0x4000000000000002 softirq=556558/556558 fqs=5190
  \x09(t=21013 jiffies g=1005461 q=132576)
  NMI backtrace for cpu 3
  CPU: 3 PID: 501900 Comm: aio-free-ring-w Kdump: loaded Not tainted 5.2.9-108_fbk12_rc3_3858_gb83b75af7909 #1
  Hardware name: Wiwynn   HoneyBadger/PantherPlus, BIOS HBM6.71 02/03/2016
  Call Trace:
   <IRQ>
   dump_stack+0x46/0x60
   nmi_cpu_backtrace.cold.3+0x13/0x50
   ? lapic_can_unplug_cpu.cold.27+0x34/0x34
   nmi_trigger_cpumask_backtrace+0xba/0xca
   rcu_dump_cpu_stacks+0x99/0xc7
   rcu_sched_clock_irq.cold.87+0x1aa/0x397
   ? tick_sched_do_timer+0x60/0x60
   update_process_times+0x28/0x60
   tick_sched_timer+0x37/0x70
   __hrtimer_run_queues+0xfe/0x270
   hrtimer_interrupt+0xf4/0x210
   smp_apic_timer_interrupt+0x5e/0x120
   apic_timer_interrupt+0xf/0x20
   </IRQ>
  RIP: 0010:kmem_cache_free+0x223/0x300
  Code: 88 00 00 00 0f 85 ca 00 00 00 41 8b 55 18 31 f6 f7 da 41 f6 45 0a 02 40 0f 94 c6 83 c6 05 9c 41 5e fa e8 a0 a7 01 00 41 56 9d <49> 8b 47 08 a8 03 0f 85 87 00 00 00 65 48 ff 08 e9 3d fe ff ff 65
  RSP: 0018:ffffc9000e8e3da8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
  RAX: 0000000000020000 RBX: ffff88861b9de960 RCX: 0000000000000030
  RDX: fffffffffffe41e8 RSI: 000060777fe3a100 RDI: 000000000001be18
  RBP: ffffea00186e7780 R08: ffffffffffffffff R09: ffffffffffffffff
  R10: ffff88861b9dea28 R11: ffff88887ffde000 R12: ffffffff81230a1f
  R13: ffff888854684dc0 R14: 0000000000000206 R15: ffff8888547dbc00
   ? remove_vma+0x4f/0x60
   remove_vma+0x4f/0x60
   exit_mmap+0xd6/0x160
   mmput+0x4a/0x110
   do_exit+0x278/0xae0
   ? syscall_trace_enter+0x1d3/0x2b0
   ? handle_mm_fault+0xaa/0x1c0
   do_group_exit+0x3a/0xa0
   __x64_sys_exit_group+0x14/0x20
   do_syscall_64+0x42/0x100
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

And on a PREEMPT=n kernel, the "while (vma)" loop in exit_mmap() can run
for a very long time given a large process.  This commit therefore adds
a cond_resched() to this loop, providing RCU any needed quiescent states.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <linux-mm@kvack.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
---
 mm/mmap.c | 1 +
 1 file changed, 1 insertion(+)

Comments

Shakeel Butt June 23, 2020, 12:47 a.m. UTC | #1
On Mon, Jun 22, 2020 at 5:22 PM <paulmck@kernel.org> wrote:
>
> From: "Paul E. McKenney" <paulmck@kernel.org>
>
> A large process running on a heavily loaded system can encounter the
> following RCU CPU stall warning:
>
>   rcu: INFO: rcu_sched self-detected stall on CPU
>   rcu: \x093-....: (20998 ticks this GP) idle=4ea/1/0x4000000000000002 softirq=556558/556558 fqs=5190
>   \x09(t=21013 jiffies g=1005461 q=132576)
>   NMI backtrace for cpu 3
>   CPU: 3 PID: 501900 Comm: aio-free-ring-w Kdump: loaded Not tainted 5.2.9-108_fbk12_rc3_3858_gb83b75af7909 #1
>   Hardware name: Wiwynn   HoneyBadger/PantherPlus, BIOS HBM6.71 02/03/2016
>   Call Trace:
>    <IRQ>
>    dump_stack+0x46/0x60
>    nmi_cpu_backtrace.cold.3+0x13/0x50
>    ? lapic_can_unplug_cpu.cold.27+0x34/0x34
>    nmi_trigger_cpumask_backtrace+0xba/0xca
>    rcu_dump_cpu_stacks+0x99/0xc7
>    rcu_sched_clock_irq.cold.87+0x1aa/0x397
>    ? tick_sched_do_timer+0x60/0x60
>    update_process_times+0x28/0x60
>    tick_sched_timer+0x37/0x70
>    __hrtimer_run_queues+0xfe/0x270
>    hrtimer_interrupt+0xf4/0x210
>    smp_apic_timer_interrupt+0x5e/0x120
>    apic_timer_interrupt+0xf/0x20
>    </IRQ>
>   RIP: 0010:kmem_cache_free+0x223/0x300
>   Code: 88 00 00 00 0f 85 ca 00 00 00 41 8b 55 18 31 f6 f7 da 41 f6 45 0a 02 40 0f 94 c6 83 c6 05 9c 41 5e fa e8 a0 a7 01 00 41 56 9d <49> 8b 47 08 a8 03 0f 85 87 00 00 00 65 48 ff 08 e9 3d fe ff ff 65
>   RSP: 0018:ffffc9000e8e3da8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
>   RAX: 0000000000020000 RBX: ffff88861b9de960 RCX: 0000000000000030
>   RDX: fffffffffffe41e8 RSI: 000060777fe3a100 RDI: 000000000001be18
>   RBP: ffffea00186e7780 R08: ffffffffffffffff R09: ffffffffffffffff
>   R10: ffff88861b9dea28 R11: ffff88887ffde000 R12: ffffffff81230a1f
>   R13: ffff888854684dc0 R14: 0000000000000206 R15: ffff8888547dbc00
>    ? remove_vma+0x4f/0x60
>    remove_vma+0x4f/0x60
>    exit_mmap+0xd6/0x160
>    mmput+0x4a/0x110
>    do_exit+0x278/0xae0
>    ? syscall_trace_enter+0x1d3/0x2b0
>    ? handle_mm_fault+0xaa/0x1c0
>    do_group_exit+0x3a/0xa0
>    __x64_sys_exit_group+0x14/0x20
>    do_syscall_64+0x42/0x100
>    entry_SYSCALL_64_after_hwframe+0x44/0xa9
>
> And on a PREEMPT=n kernel, the "while (vma)" loop in exit_mmap() can run
> for a very long time given a large process.  This commit therefore adds
> a cond_resched() to this loop, providing RCU any needed quiescent states.
>
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Cc: <linux-mm@kvack.org>
> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

We have exactly the same change in our internal kernel since 2018. We
mostly observed the need_resched warnings on the processes mapping the
hugetlbfs.

Reviewed-by: Shakeel Butt <shakeelb@google.com>

> ---
>  mm/mmap.c | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/mm/mmap.c b/mm/mmap.c
> index 59a4682..972f839 100644
> --- a/mm/mmap.c
> +++ b/mm/mmap.c
> @@ -3159,6 +3159,7 @@ void exit_mmap(struct mm_struct *mm)
>                 if (vma->vm_flags & VM_ACCOUNT)
>                         nr_accounted += vma_pages(vma);
>                 vma = remove_vma(vma);
> +               cond_resched();
>         }
>         vm_unacct_memory(nr_accounted);
>  }
> --
> 2.9.5
>
Paul E. McKenney June 23, 2020, 12:57 a.m. UTC | #2
On Mon, Jun 22, 2020 at 05:47:19PM -0700, Shakeel Butt wrote:
> On Mon, Jun 22, 2020 at 5:22 PM <paulmck@kernel.org> wrote:
> >
> > From: "Paul E. McKenney" <paulmck@kernel.org>
> >
> > A large process running on a heavily loaded system can encounter the
> > following RCU CPU stall warning:
> >
> >   rcu: INFO: rcu_sched self-detected stall on CPU
> >   rcu: \x093-....: (20998 ticks this GP) idle=4ea/1/0x4000000000000002 softirq=556558/556558 fqs=5190
> >   \x09(t=21013 jiffies g=1005461 q=132576)
> >   NMI backtrace for cpu 3
> >   CPU: 3 PID: 501900 Comm: aio-free-ring-w Kdump: loaded Not tainted 5.2.9-108_fbk12_rc3_3858_gb83b75af7909 #1
> >   Hardware name: Wiwynn   HoneyBadger/PantherPlus, BIOS HBM6.71 02/03/2016
> >   Call Trace:
> >    <IRQ>
> >    dump_stack+0x46/0x60
> >    nmi_cpu_backtrace.cold.3+0x13/0x50
> >    ? lapic_can_unplug_cpu.cold.27+0x34/0x34
> >    nmi_trigger_cpumask_backtrace+0xba/0xca
> >    rcu_dump_cpu_stacks+0x99/0xc7
> >    rcu_sched_clock_irq.cold.87+0x1aa/0x397
> >    ? tick_sched_do_timer+0x60/0x60
> >    update_process_times+0x28/0x60
> >    tick_sched_timer+0x37/0x70
> >    __hrtimer_run_queues+0xfe/0x270
> >    hrtimer_interrupt+0xf4/0x210
> >    smp_apic_timer_interrupt+0x5e/0x120
> >    apic_timer_interrupt+0xf/0x20
> >    </IRQ>
> >   RIP: 0010:kmem_cache_free+0x223/0x300
> >   Code: 88 00 00 00 0f 85 ca 00 00 00 41 8b 55 18 31 f6 f7 da 41 f6 45 0a 02 40 0f 94 c6 83 c6 05 9c 41 5e fa e8 a0 a7 01 00 41 56 9d <49> 8b 47 08 a8 03 0f 85 87 00 00 00 65 48 ff 08 e9 3d fe ff ff 65
> >   RSP: 0018:ffffc9000e8e3da8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
> >   RAX: 0000000000020000 RBX: ffff88861b9de960 RCX: 0000000000000030
> >   RDX: fffffffffffe41e8 RSI: 000060777fe3a100 RDI: 000000000001be18
> >   RBP: ffffea00186e7780 R08: ffffffffffffffff R09: ffffffffffffffff
> >   R10: ffff88861b9dea28 R11: ffff88887ffde000 R12: ffffffff81230a1f
> >   R13: ffff888854684dc0 R14: 0000000000000206 R15: ffff8888547dbc00
> >    ? remove_vma+0x4f/0x60
> >    remove_vma+0x4f/0x60
> >    exit_mmap+0xd6/0x160
> >    mmput+0x4a/0x110
> >    do_exit+0x278/0xae0
> >    ? syscall_trace_enter+0x1d3/0x2b0
> >    ? handle_mm_fault+0xaa/0x1c0
> >    do_group_exit+0x3a/0xa0
> >    __x64_sys_exit_group+0x14/0x20
> >    do_syscall_64+0x42/0x100
> >    entry_SYSCALL_64_after_hwframe+0x44/0xa9
> >
> > And on a PREEMPT=n kernel, the "while (vma)" loop in exit_mmap() can run
> > for a very long time given a large process.  This commit therefore adds
> > a cond_resched() to this loop, providing RCU any needed quiescent states.
> >
> > Cc: Andrew Morton <akpm@linux-foundation.org>
> > Cc: <linux-mm@kvack.org>
> > Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
> 
> We have exactly the same change in our internal kernel since 2018. We
> mostly observed the need_resched warnings on the processes mapping the
> hugetlbfs.
> 
> Reviewed-by: Shakeel Butt <shakeelb@google.com>

Thank you very much, I will apply your Reviewed-by on the next rebase.

Any other patches we should know about?  ;-)

							Thanx, Paul

> > ---
> >  mm/mmap.c | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/mm/mmap.c b/mm/mmap.c
> > index 59a4682..972f839 100644
> > --- a/mm/mmap.c
> > +++ b/mm/mmap.c
> > @@ -3159,6 +3159,7 @@ void exit_mmap(struct mm_struct *mm)
> >                 if (vma->vm_flags & VM_ACCOUNT)
> >                         nr_accounted += vma_pages(vma);
> >                 vma = remove_vma(vma);
> > +               cond_resched();
> >         }
> >         vm_unacct_memory(nr_accounted);
> >  }
> > --
> > 2.9.5
> >
Joel Fernandes June 23, 2020, 7:34 p.m. UTC | #3
On Mon, Jun 22, 2020 at 05:21:23PM -0700, paulmck@kernel.org wrote:
> From: "Paul E. McKenney" <paulmck@kernel.org>
> 
> A large process running on a heavily loaded system can encounter the
> following RCU CPU stall warning:
> 
>   rcu: INFO: rcu_sched self-detected stall on CPU
>   rcu: \x093-....: (20998 ticks this GP) idle=4ea/1/0x4000000000000002 softirq=556558/556558 fqs=5190
>   \x09(t=21013 jiffies g=1005461 q=132576)
>   NMI backtrace for cpu 3
>   CPU: 3 PID: 501900 Comm: aio-free-ring-w Kdump: loaded Not tainted 5.2.9-108_fbk12_rc3_3858_gb83b75af7909 #1
>   Hardware name: Wiwynn   HoneyBadger/PantherPlus, BIOS HBM6.71 02/03/2016
>   Call Trace:
>    <IRQ>
>    dump_stack+0x46/0x60
>    nmi_cpu_backtrace.cold.3+0x13/0x50
>    ? lapic_can_unplug_cpu.cold.27+0x34/0x34
>    nmi_trigger_cpumask_backtrace+0xba/0xca
>    rcu_dump_cpu_stacks+0x99/0xc7
>    rcu_sched_clock_irq.cold.87+0x1aa/0x397
>    ? tick_sched_do_timer+0x60/0x60
>    update_process_times+0x28/0x60
>    tick_sched_timer+0x37/0x70
>    __hrtimer_run_queues+0xfe/0x270
>    hrtimer_interrupt+0xf4/0x210
>    smp_apic_timer_interrupt+0x5e/0x120
>    apic_timer_interrupt+0xf/0x20
>    </IRQ>
>   RIP: 0010:kmem_cache_free+0x223/0x300
>   Code: 88 00 00 00 0f 85 ca 00 00 00 41 8b 55 18 31 f6 f7 da 41 f6 45 0a 02 40 0f 94 c6 83 c6 05 9c 41 5e fa e8 a0 a7 01 00 41 56 9d <49> 8b 47 08 a8 03 0f 85 87 00 00 00 65 48 ff 08 e9 3d fe ff ff 65
>   RSP: 0018:ffffc9000e8e3da8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
>   RAX: 0000000000020000 RBX: ffff88861b9de960 RCX: 0000000000000030
>   RDX: fffffffffffe41e8 RSI: 000060777fe3a100 RDI: 000000000001be18
>   RBP: ffffea00186e7780 R08: ffffffffffffffff R09: ffffffffffffffff
>   R10: ffff88861b9dea28 R11: ffff88887ffde000 R12: ffffffff81230a1f
>   R13: ffff888854684dc0 R14: 0000000000000206 R15: ffff8888547dbc00
>    ? remove_vma+0x4f/0x60
>    remove_vma+0x4f/0x60
>    exit_mmap+0xd6/0x160
>    mmput+0x4a/0x110
>    do_exit+0x278/0xae0
>    ? syscall_trace_enter+0x1d3/0x2b0
>    ? handle_mm_fault+0xaa/0x1c0
>    do_group_exit+0x3a/0xa0
>    __x64_sys_exit_group+0x14/0x20
>    do_syscall_64+0x42/0x100
>    entry_SYSCALL_64_after_hwframe+0x44/0xa9
> 
> And on a PREEMPT=n kernel, the "while (vma)" loop in exit_mmap() can run
> for a very long time given a large process.  This commit therefore adds
> a cond_resched() to this loop, providing RCU any needed quiescent states.
> 
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Cc: <linux-mm@kvack.org>
> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
> ---
>  mm/mmap.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/mm/mmap.c b/mm/mmap.c
> index 59a4682..972f839 100644
> --- a/mm/mmap.c
> +++ b/mm/mmap.c
> @@ -3159,6 +3159,7 @@ void exit_mmap(struct mm_struct *mm)
>  		if (vma->vm_flags & VM_ACCOUNT)
>  			nr_accounted += vma_pages(vma);
>  		vma = remove_vma(vma);
> +		cond_resched();

Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>

Just for my understanding, cond_resched_tasks_rcu_qs() may not help here
because preemption is not disabled right? Still I see no harm in using it
here either as it may give a slight speed up for tasks-RCU.

thanks,

 - Joel

>  	}
>  	vm_unacct_memory(nr_accounted);
>  }
> -- 
> 2.9.5
>
Paul E. McKenney June 23, 2020, 8:55 p.m. UTC | #4
On Tue, Jun 23, 2020 at 03:34:31PM -0400, Joel Fernandes wrote:
> On Mon, Jun 22, 2020 at 05:21:23PM -0700, paulmck@kernel.org wrote:
> > From: "Paul E. McKenney" <paulmck@kernel.org>
> > 
> > A large process running on a heavily loaded system can encounter the
> > following RCU CPU stall warning:
> > 
> >   rcu: INFO: rcu_sched self-detected stall on CPU
> >   rcu: \x093-....: (20998 ticks this GP) idle=4ea/1/0x4000000000000002 softirq=556558/556558 fqs=5190
> >   \x09(t=21013 jiffies g=1005461 q=132576)
> >   NMI backtrace for cpu 3
> >   CPU: 3 PID: 501900 Comm: aio-free-ring-w Kdump: loaded Not tainted 5.2.9-108_fbk12_rc3_3858_gb83b75af7909 #1
> >   Hardware name: Wiwynn   HoneyBadger/PantherPlus, BIOS HBM6.71 02/03/2016
> >   Call Trace:
> >    <IRQ>
> >    dump_stack+0x46/0x60
> >    nmi_cpu_backtrace.cold.3+0x13/0x50
> >    ? lapic_can_unplug_cpu.cold.27+0x34/0x34
> >    nmi_trigger_cpumask_backtrace+0xba/0xca
> >    rcu_dump_cpu_stacks+0x99/0xc7
> >    rcu_sched_clock_irq.cold.87+0x1aa/0x397
> >    ? tick_sched_do_timer+0x60/0x60
> >    update_process_times+0x28/0x60
> >    tick_sched_timer+0x37/0x70
> >    __hrtimer_run_queues+0xfe/0x270
> >    hrtimer_interrupt+0xf4/0x210
> >    smp_apic_timer_interrupt+0x5e/0x120
> >    apic_timer_interrupt+0xf/0x20
> >    </IRQ>
> >   RIP: 0010:kmem_cache_free+0x223/0x300
> >   Code: 88 00 00 00 0f 85 ca 00 00 00 41 8b 55 18 31 f6 f7 da 41 f6 45 0a 02 40 0f 94 c6 83 c6 05 9c 41 5e fa e8 a0 a7 01 00 41 56 9d <49> 8b 47 08 a8 03 0f 85 87 00 00 00 65 48 ff 08 e9 3d fe ff ff 65
> >   RSP: 0018:ffffc9000e8e3da8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
> >   RAX: 0000000000020000 RBX: ffff88861b9de960 RCX: 0000000000000030
> >   RDX: fffffffffffe41e8 RSI: 000060777fe3a100 RDI: 000000000001be18
> >   RBP: ffffea00186e7780 R08: ffffffffffffffff R09: ffffffffffffffff
> >   R10: ffff88861b9dea28 R11: ffff88887ffde000 R12: ffffffff81230a1f
> >   R13: ffff888854684dc0 R14: 0000000000000206 R15: ffff8888547dbc00
> >    ? remove_vma+0x4f/0x60
> >    remove_vma+0x4f/0x60
> >    exit_mmap+0xd6/0x160
> >    mmput+0x4a/0x110
> >    do_exit+0x278/0xae0
> >    ? syscall_trace_enter+0x1d3/0x2b0
> >    ? handle_mm_fault+0xaa/0x1c0
> >    do_group_exit+0x3a/0xa0
> >    __x64_sys_exit_group+0x14/0x20
> >    do_syscall_64+0x42/0x100
> >    entry_SYSCALL_64_after_hwframe+0x44/0xa9
> > 
> > And on a PREEMPT=n kernel, the "while (vma)" loop in exit_mmap() can run
> > for a very long time given a large process.  This commit therefore adds
> > a cond_resched() to this loop, providing RCU any needed quiescent states.
> > 
> > Cc: Andrew Morton <akpm@linux-foundation.org>
> > Cc: <linux-mm@kvack.org>
> > Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
> > ---
> >  mm/mmap.c | 1 +
> >  1 file changed, 1 insertion(+)
> > 
> > diff --git a/mm/mmap.c b/mm/mmap.c
> > index 59a4682..972f839 100644
> > --- a/mm/mmap.c
> > +++ b/mm/mmap.c
> > @@ -3159,6 +3159,7 @@ void exit_mmap(struct mm_struct *mm)
> >  		if (vma->vm_flags & VM_ACCOUNT)
> >  			nr_accounted += vma_pages(vma);
> >  		vma = remove_vma(vma);
> > +		cond_resched();
> 
> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>

Thank you!  I will apply this on my next rebase.

> Just for my understanding, cond_resched_tasks_rcu_qs() may not help here
> because preemption is not disabled right? Still I see no harm in using it
> here either as it may give a slight speed up for tasks-RCU.

The RCU-tasks stall-warning interval is ten minutes, and I have not yet
seen evidence that we are getting close to that.  If we do, then yes,
a cond_resched_tasks_rcu_qs() might be in this code's future.  But it
does add overhead, so we need to see the evidence first.

							Thanx, Paul

> thanks,
> 
>  - Joel
> 
> >  	}
> >  	vm_unacct_memory(nr_accounted);
> >  }
> > -- 
> > 2.9.5
> >
Joel Fernandes June 23, 2020, 9:01 p.m. UTC | #5
On Tue, Jun 23, 2020 at 01:55:08PM -0700, Paul E. McKenney wrote:
[..] 
> > Just for my understanding, cond_resched_tasks_rcu_qs() may not help here
> > because preemption is not disabled right? Still I see no harm in using it
> > here either as it may give a slight speed up for tasks-RCU.
> 
> The RCU-tasks stall-warning interval is ten minutes, and I have not yet
> seen evidence that we are getting close to that.  If we do, then yes,
> a cond_resched_tasks_rcu_qs() might be in this code's future.  But it
> does add overhead, so we need to see the evidence first.

Yes, true about that overhead. Ok, this is fine with me too, thanks :)

 - Joel
diff mbox series

Patch

diff --git a/mm/mmap.c b/mm/mmap.c
index 59a4682..972f839 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -3159,6 +3159,7 @@  void exit_mmap(struct mm_struct *mm)
 		if (vma->vm_flags & VM_ACCOUNT)
 			nr_accounted += vma_pages(vma);
 		vma = remove_vma(vma);
+		cond_resched();
 	}
 	vm_unacct_memory(nr_accounted);
 }