diff mbox series

[3/4] mmu_gather: Let there be one tlb_{start,end}_vma() implementation

Message ID 20220708071834.084532973@infradead.org (mailing list archive)
State New
Headers show
Series munmap() vs unmap_mapping_range() | expand

Commit Message

Peter Zijlstra July 8, 2022, 7:18 a.m. UTC
Now that architectures are no longer allowed to override
tlb_{start,end}_vma() re-arrange code so that there is only one
implementation for each of these functions.

This much simplifies trying to figure out what they actually do.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
---
 include/asm-generic/tlb.h |   15 ++-------------
 1 file changed, 2 insertions(+), 13 deletions(-)

Comments

Will Deacon July 8, 2022, 1:32 p.m. UTC | #1
On Fri, Jul 08, 2022 at 09:18:05AM +0200, Peter Zijlstra wrote:
> Now that architectures are no longer allowed to override
> tlb_{start,end}_vma() re-arrange code so that there is only one
> implementation for each of these functions.
> 
> This much simplifies trying to figure out what they actually do.
> 
> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
> ---
>  include/asm-generic/tlb.h |   15 ++-------------
>  1 file changed, 2 insertions(+), 13 deletions(-)
> 
> --- a/include/asm-generic/tlb.h
> +++ b/include/asm-generic/tlb.h
> @@ -346,8 +346,8 @@ static inline void __tlb_reset_range(str
>  
>  #ifdef CONFIG_MMU_GATHER_NO_RANGE
>  
> -#if defined(tlb_flush) || defined(tlb_start_vma) || defined(tlb_end_vma)
> -#error MMU_GATHER_NO_RANGE relies on default tlb_flush(), tlb_start_vma() and tlb_end_vma()
> +#if defined(tlb_flush)
> +#error MMU_GATHER_NO_RANGE relies on default tlb_flush()
>  #endif
>  
>  /*
> @@ -367,17 +367,10 @@ static inline void tlb_flush(struct mmu_
>  static inline void
>  tlb_update_vma_flags(struct mmu_gather *tlb, struct vm_area_struct *vma) { }
>  
> -#define tlb_end_vma tlb_end_vma
> -static inline void tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) { }
> -
>  #else /* CONFIG_MMU_GATHER_NO_RANGE */
>  
>  #ifndef tlb_flush
>  
> -#if defined(tlb_start_vma) || defined(tlb_end_vma)
> -#error Default tlb_flush() relies on default tlb_start_vma() and tlb_end_vma()
> -#endif
> -
>  /*
>   * When an architecture does not provide its own tlb_flush() implementation
>   * but does have a reasonably efficient flush_vma_range() implementation
> @@ -498,7 +491,6 @@ static inline unsigned long tlb_get_unma
>   * case where we're doing a full MM flush.  When we're doing a munmap,
>   * the vmas are adjusted to only cover the region to be torn down.
>   */
> -#ifndef tlb_start_vma
>  static inline void tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
>  {
>  	if (tlb->fullmm)
> @@ -509,9 +501,7 @@ static inline void tlb_start_vma(struct
>  	flush_cache_range(vma, vma->vm_start, vma->vm_end);
>  #endif
>  }
> -#endif
>  
> -#ifndef tlb_end_vma
>  static inline void tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
>  {
>  	if (tlb->fullmm || IS_ENABLED(CONFIG_MMU_GATHER_MERGE_VMAS))
> @@ -525,7 +515,6 @@ static inline void tlb_end_vma(struct mm
>  	 */
>  	tlb_flush_mmu_tlbonly(tlb);
>  }
> -#endif

Much nicer:

Acked-by: Will Deacon <will@kernel.org>

Will
diff mbox series

Patch

--- a/include/asm-generic/tlb.h
+++ b/include/asm-generic/tlb.h
@@ -346,8 +346,8 @@  static inline void __tlb_reset_range(str
 
 #ifdef CONFIG_MMU_GATHER_NO_RANGE
 
-#if defined(tlb_flush) || defined(tlb_start_vma) || defined(tlb_end_vma)
-#error MMU_GATHER_NO_RANGE relies on default tlb_flush(), tlb_start_vma() and tlb_end_vma()
+#if defined(tlb_flush)
+#error MMU_GATHER_NO_RANGE relies on default tlb_flush()
 #endif
 
 /*
@@ -367,17 +367,10 @@  static inline void tlb_flush(struct mmu_
 static inline void
 tlb_update_vma_flags(struct mmu_gather *tlb, struct vm_area_struct *vma) { }
 
-#define tlb_end_vma tlb_end_vma
-static inline void tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) { }
-
 #else /* CONFIG_MMU_GATHER_NO_RANGE */
 
 #ifndef tlb_flush
 
-#if defined(tlb_start_vma) || defined(tlb_end_vma)
-#error Default tlb_flush() relies on default tlb_start_vma() and tlb_end_vma()
-#endif
-
 /*
  * When an architecture does not provide its own tlb_flush() implementation
  * but does have a reasonably efficient flush_vma_range() implementation
@@ -498,7 +491,6 @@  static inline unsigned long tlb_get_unma
  * case where we're doing a full MM flush.  When we're doing a munmap,
  * the vmas are adjusted to only cover the region to be torn down.
  */
-#ifndef tlb_start_vma
 static inline void tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 {
 	if (tlb->fullmm)
@@ -509,9 +501,7 @@  static inline void tlb_start_vma(struct
 	flush_cache_range(vma, vma->vm_start, vma->vm_end);
 #endif
 }
-#endif
 
-#ifndef tlb_end_vma
 static inline void tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 {
 	if (tlb->fullmm || IS_ENABLED(CONFIG_MMU_GATHER_MERGE_VMAS))
@@ -525,7 +515,6 @@  static inline void tlb_end_vma(struct mm
 	 */
 	tlb_flush_mmu_tlbonly(tlb);
 }
-#endif
 
 /*
  * tlb_flush_{pte|pmd|pud|p4d}_range() adjust the tlb->start and tlb->end,