@@ -172,7 +172,7 @@ variables.
Offset of the free_list's member. This value is used to compute the number
of free pages.
-Each zone has a free_area structure array called free_area[MAX_ORDER].
+Each zone has a free_area structure array called free_area[MAX_ORDER + 1].
The free_list represents a linked list of free page blocks.
(list_head, next|prev)
@@ -189,7 +189,7 @@ Offsets of the vmap_area's members. They carry vmalloc-specific
information. Makedumpfile gets the start address of the vmalloc region
from this.
-(zone.free_area, MAX_ORDER)
+(zone.free_area, MAX_ORDER + 1)
---------------------------
Free areas descriptor. User-space tools use this value to iterate the
@@ -928,7 +928,7 @@
buddy allocator. Bigger value increase the probability
of catching random memory corruption, but reduce the
amount of memory for normal system use. The maximum
- possible value is MAX_ORDER/2. Setting this parameter
+ possible value is (MAX_ORDER + 1)/2. Setting this parameter
to 1 or 2 should be enough to identify most random
memory corruption problems caused by bugs in kernel or
driver code when a CPU writes to (or reads from) a
@@ -3899,7 +3899,7 @@
[KNL] Minimal page reporting order
Format: <integer>
Adjust the minimal page reporting order. The page
- reporting is disabled when it exceeds (MAX_ORDER-1).
+ reporting is disabled when it exceeds MAX_ORDER.
panic= [KNL] Kernel behaviour on panic: delay <timeout>
timeout > 0: seconds before rebooting
@@ -556,7 +556,7 @@ endmenu # "ARC Architecture Configuration"
config ARCH_FORCE_MAX_ORDER
int "Maximum zone order"
- default "12" if ARC_HUGEPAGE_16M
- default "11"
+ default "11" if ARC_HUGEPAGE_16M
+ default "10"
source "kernel/power/Kconfig"
@@ -1436,19 +1436,17 @@ config ARM_MODULE_PLTS
config ARCH_FORCE_MAX_ORDER
int "Maximum zone order"
- default "12" if SOC_AM33XX
- default "9" if SA1111
- default "11"
+ default "11" if SOC_AM33XX
+ default "8" if SA1111
+ default "10"
help
The kernel memory allocator divides physically contiguous memory
blocks into "zones", where each zone is a power of two number of
pages. This option selects the largest power of two that the kernel
keeps in the memory allocator. If you need to allocate very large
blocks of physically contiguous memory, then you may need to
- increase this value.
-
- This config option is actually maximum order plus one. For example,
- a value of 11 means that the largest free memory block is 2^10 pages.
+ increase this value. A value of 10 means that the largest free memory
+ block is 2^10 pages.
config ALIGNMENT_TRAP
def_bool CPU_CP15_MMU
@@ -31,7 +31,7 @@ CONFIG_SOC_VF610=y
CONFIG_SMP=y
CONFIG_ARM_PSCI=y
CONFIG_HIGHMEM=y
-CONFIG_ARCH_FORCE_MAX_ORDER=14
+CONFIG_ARCH_FORCE_MAX_ORDER=13
CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
CONFIG_KEXEC=y
CONFIG_CPU_FREQ=y
@@ -26,7 +26,7 @@ CONFIG_THUMB2_KERNEL=y
# CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11 is not set
# CONFIG_ARM_PATCH_IDIV is not set
CONFIG_HIGHMEM=y
-CONFIG_ARCH_FORCE_MAX_ORDER=12
+CONFIG_ARCH_FORCE_MAX_ORDER=11
CONFIG_SECCOMP=y
CONFIG_KEXEC=y
CONFIG_EFI=y
@@ -12,7 +12,7 @@ CONFIG_ARCH_OXNAS=y
CONFIG_MACH_OX820=y
CONFIG_SMP=y
CONFIG_NR_CPUS=16
-CONFIG_ARCH_FORCE_MAX_ORDER=12
+CONFIG_ARCH_FORCE_MAX_ORDER=11
CONFIG_SECCOMP=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
@@ -19,7 +19,7 @@ CONFIG_ATMEL_CLOCKSOURCE_TCB=y
# CONFIG_CACHE_L2X0 is not set
# CONFIG_ARM_PATCH_IDIV is not set
# CONFIG_CPU_SW_DOMAIN_PAN is not set
-CONFIG_ARCH_FORCE_MAX_ORDER=15
+CONFIG_ARCH_FORCE_MAX_ORDER=14
CONFIG_UACCESS_WITH_MEMCPY=y
# CONFIG_ATAGS is not set
CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk ignore_loglevel"
@@ -1403,25 +1403,23 @@ config XEN
config ARCH_FORCE_MAX_ORDER
int
- default "14" if ARM64_64K_PAGES
- default "12" if ARM64_16K_PAGES
- default "11"
+ default "13" if ARM64_64K_PAGES
+ default "11" if ARM64_16K_PAGES
+ default "10"
help
The kernel memory allocator divides physically contiguous memory
blocks into "zones", where each zone is a power of two number of
pages. This option selects the largest power of two that the kernel
keeps in the memory allocator. If you need to allocate very large
blocks of physically contiguous memory, then you may need to
- increase this value.
-
- This config option is actually maximum order plus one. For example,
- a value of 11 means that the largest free memory block is 2^10 pages.
+ increase this value. A value of 10 means that the largest free memory
+ block is 2^10 pages.
We make sure that we can allocate upto a HugePage size for each configuration.
Hence we have :
- MAX_ORDER = (PMD_SHIFT - PAGE_SHIFT) + 1 => PAGE_SHIFT - 2
+ MAX_ORDER = PMD_SHIFT - PAGE_SHIFT = PAGE_SHIFT - 3
- However for 4K, we choose a higher default value, 11 as opposed to 10, giving us
+ However for 4K, we choose a higher default value, 10 as opposed to 9, giving us
4M allocations matching the default size used by generic code.
config UNMAP_KERNEL_AT_EL0
@@ -10,7 +10,7 @@
/*
* Section size must be at least 512MB for 64K base
* page size config. Otherwise it will be less than
- * (MAX_ORDER - 1) and the build process will fail.
+ * MAX_ORDER and the build process will fail.
*/
#ifdef CONFIG_ARM64_64K_PAGES
#define SECTION_SIZE_BITS 29
@@ -16,7 +16,7 @@ struct hyp_pool {
* API at EL2.
*/
hyp_spinlock_t lock;
- struct list_head free_area[MAX_ORDER];
+ struct list_head free_area[MAX_ORDER + 1];
phys_addr_t range_start;
phys_addr_t range_end;
unsigned short max_order;
@@ -334,7 +334,7 @@ config HIGHMEM
config ARCH_FORCE_MAX_ORDER
int "Maximum zone order"
- default "11"
+ default "10"
config DRAM_BASE
hex "DRAM start addr (the same with memory-section in dts)"
@@ -201,10 +201,10 @@ config IA64_CYCLONE
If you're unsure, answer N.
config ARCH_FORCE_MAX_ORDER
- int "MAX_ORDER (11 - 17)" if !HUGETLB_PAGE
- range 11 17 if !HUGETLB_PAGE
- default "17" if HUGETLB_PAGE
- default "11"
+ int "MAX_ORDER (10 - 16)" if !HUGETLB_PAGE
+ range 10 16 if !HUGETLB_PAGE
+ default "16" if HUGETLB_PAGE
+ default "10"
config SMP
bool "Symmetric multi-processing support"
@@ -12,9 +12,9 @@
#define SECTION_SIZE_BITS (30)
#define MAX_PHYSMEM_BITS (50)
#ifdef CONFIG_ARCH_FORCE_MAX_ORDER
-#if ((CONFIG_ARCH_FORCE_MAX_ORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS)
+#if ((CONFIG_ARCH_FORCE_MAX_ORDER + PAGE_SHIFT) > SECTION_SIZE_BITS)
#undef SECTION_SIZE_BITS
-#define SECTION_SIZE_BITS (CONFIG_ARCH_FORCE_MAX_ORDER - 1 + PAGE_SHIFT)
+#define SECTION_SIZE_BITS (CONFIG_ARCH_FORCE_MAX_ORDER + PAGE_SHIFT)
#endif
#endif
@@ -185,7 +185,7 @@ static int __init hugetlb_setup_sz(char *str)
size = memparse(str, &str);
if (*str || !is_power_of_2(size) || !(tr_pages & size) ||
size <= PAGE_SIZE ||
- size >= (1UL << PAGE_SHIFT << MAX_ORDER)) {
+ size > (1UL << PAGE_SHIFT << MAX_ORDER)) {
printk(KERN_WARNING "Invalid huge page size specified\n");
return 1;
}
@@ -402,22 +402,20 @@ config SINGLE_MEMORY_CHUNK
config ARCH_FORCE_MAX_ORDER
int "Maximum zone order" if ADVANCED
depends on !SINGLE_MEMORY_CHUNK
- default "11"
+ default "10"
help
The kernel memory allocator divides physically contiguous memory
blocks into "zones", where each zone is a power of two number of
pages. This option selects the largest power of two that the kernel
keeps in the memory allocator. If you need to allocate very large
blocks of physically contiguous memory, then you may need to
- increase this value.
+ increase this value. A value of 10 means that the largest free memory
+ block is 2^10 pages.
For systems that have holes in their physical address space this
value also defines the minimal size of the hole that allows
freeing unused memory map.
- This config option is actually maximum order plus one. For example,
- a value of 11 means that the largest free memory block is 2^10 pages.
-
config 060_WRITETHROUGH
bool "Use write-through caching for 68060 supervisor accesses"
depends on ADVANCED && M68060
@@ -2142,24 +2142,22 @@ endchoice
config ARCH_FORCE_MAX_ORDER
int "Maximum zone order"
- range 14 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB
- default "14" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB
- range 13 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB
- default "13" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB
- range 12 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB
- default "12" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB
- range 0 64
- default "11"
+ range 13 63 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB
+ default "13" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB
+ range 12 63 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB
+ default "12" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB
+ range 11 63 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB
+ default "11" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB
+ range 0 63
+ default "10"
help
The kernel memory allocator divides physically contiguous memory
blocks into "zones", where each zone is a power of two number of
pages. This option selects the largest power of two that the kernel
keeps in the memory allocator. If you need to allocate very large
blocks of physically contiguous memory, then you may need to
- increase this value.
-
- This config option is actually maximum order plus one. For example,
- a value of 11 means that the largest free memory block is 2^10 pages.
+ increase this value. A value of 10 means that the largest free memory
+ block is 2^10 pages.
The page size is not necessarily 4KB. Keep this in mind
when choosing a value for this option.
@@ -46,18 +46,16 @@ source "kernel/Kconfig.hz"
config ARCH_FORCE_MAX_ORDER
int "Maximum zone order"
- range 9 20
- default "11"
+ range 8 19
+ default "10"
help
The kernel memory allocator divides physically contiguous memory
blocks into "zones", where each zone is a power of two number of
pages. This option selects the largest power of two that the kernel
keeps in the memory allocator. If you need to allocate very large
blocks of physically contiguous memory, then you may need to
- increase this value.
-
- This config option is actually maximum order plus one. For example,
- a value of 11 means that the largest free memory block is 2^10 pages.
+ increase this value. A value of 10 means that the largest free memory
+ block is 2^10 pages.
endmenu
@@ -847,28 +847,26 @@ config DATA_SHIFT
config ARCH_FORCE_MAX_ORDER
int "Maximum zone order"
- range 8 9 if PPC64 && PPC_64K_PAGES
- default "9" if PPC64 && PPC_64K_PAGES
- range 13 13 if PPC64 && !PPC_64K_PAGES
- default "13" if PPC64 && !PPC_64K_PAGES
- range 9 64 if PPC32 && PPC_16K_PAGES
- default "9" if PPC32 && PPC_16K_PAGES
- range 7 64 if PPC32 && PPC_64K_PAGES
- default "7" if PPC32 && PPC_64K_PAGES
- range 5 64 if PPC32 && PPC_256K_PAGES
- default "5" if PPC32 && PPC_256K_PAGES
- range 11 64
- default "11"
+ range 7 8 if PPC64 && PPC_64K_PAGES
+ default "8" if PPC64 && PPC_64K_PAGES
+ range 12 12 if PPC64 && !PPC_64K_PAGES
+ default "12" if PPC64 && !PPC_64K_PAGES
+ range 8 63 if PPC32 && PPC_16K_PAGES
+ default "8" if PPC32 && PPC_16K_PAGES
+ range 6 63 if PPC32 && PPC_64K_PAGES
+ default "6" if PPC32 && PPC_64K_PAGES
+ range 4 63 if PPC32 && PPC_256K_PAGES
+ default "4" if PPC32 && PPC_256K_PAGES
+ range 10 63
+ default "10"
help
The kernel memory allocator divides physically contiguous memory
blocks into "zones", where each zone is a power of two number of
pages. This option selects the largest power of two that the kernel
keeps in the memory allocator. If you need to allocate very large
blocks of physically contiguous memory, then you may need to
- increase this value.
-
- This config option is actually maximum order plus one. For example,
- a value of 11 means that the largest free memory block is 2^10 pages.
+ increase this value. A value of 11 means that the largest free memory
+ block is 2^10 pages.
The page size is not necessarily 4KB. For example, on 64-bit
systems, 64KB pages can be enabled via CONFIG_PPC_64K_PAGES. Keep
@@ -30,7 +30,7 @@ CONFIG_PREEMPT=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
-CONFIG_ARCH_FORCE_MAX_ORDER=17
+CONFIG_ARCH_FORCE_MAX_ORDER=16
CONFIG_PCI=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCI_MSI=y
@@ -41,7 +41,7 @@ CONFIG_FIXED_PHY=y
CONFIG_FONT_8x16=y
CONFIG_FONT_8x8=y
CONFIG_FONTS=y
-CONFIG_ARCH_FORCE_MAX_ORDER=13
+CONFIG_ARCH_FORCE_MAX_ORDER=12
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAME_WARN=1024
CONFIG_FTL=y
@@ -97,7 +97,7 @@ static long mm_iommu_do_alloc(struct mm_struct *mm, unsigned long ua,
}
mmap_read_lock(mm);
- chunk = (1UL << (PAGE_SHIFT + MAX_ORDER - 1)) /
+ chunk = (1UL << (PAGE_SHIFT + MAX_ORDER)) /
sizeof(struct vm_area_struct *);
chunk = min(chunk, entries);
for (entry = 0; entry < entries; entry += chunk) {
@@ -652,7 +652,7 @@ void __init gigantic_hugetlb_cma_reserve(void)
order = mmu_psize_to_shift(MMU_PAGE_16G) - PAGE_SHIFT;
if (order) {
- VM_WARN_ON(order < MAX_ORDER);
+ VM_WARN_ON(order <= MAX_ORDER);
hugetlb_cma_reserve(order);
}
}
@@ -1740,7 +1740,7 @@ static long pnv_pci_ioda2_setup_default_config(struct pnv_ioda_pe *pe)
* DMA window can be larger than available memory, which will
* cause errors later.
*/
- const u64 maxblock = 1UL << (PAGE_SHIFT + MAX_ORDER - 1);
+ const u64 maxblock = 1UL << (PAGE_SHIFT + MAX_ORDER);
/*
* We create the default window as big as we can. The constraint is
@@ -8,7 +8,7 @@ CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_CPU_SUBTYPE_SH7724=y
-CONFIG_ARCH_FORCE_MAX_ORDER=12
+CONFIG_ARCH_FORCE_MAX_ORDER=11
CONFIG_MEMORY_SIZE=0x10000000
CONFIG_FLATMEM_MANUAL=y
CONFIG_SH_ECOVEC=y
@@ -20,23 +20,21 @@ config PAGE_OFFSET
config ARCH_FORCE_MAX_ORDER
int "Maximum zone order"
- range 9 64 if PAGE_SIZE_16KB
- default "9" if PAGE_SIZE_16KB
- range 7 64 if PAGE_SIZE_64KB
- default "7" if PAGE_SIZE_64KB
- range 11 64
- default "14" if !MMU
- default "11"
+ range 8 63 if PAGE_SIZE_16KB
+ default "8" if PAGE_SIZE_16KB
+ range 6 63 if PAGE_SIZE_64KB
+ default "6" if PAGE_SIZE_64KB
+ range 10 63
+ default "13" if !MMU
+ default "10"
help
The kernel memory allocator divides physically contiguous memory
blocks into "zones", where each zone is a power of two number of
pages. This option selects the largest power of two that the kernel
keeps in the memory allocator. If you need to allocate very large
blocks of physically contiguous memory, then you may need to
- increase this value.
-
- This config option is actually maximum order plus one. For example,
- a value of 11 means that the largest free memory block is 2^10 pages.
+ increase this value. A value of 10 means that the largest free memory
+ block is 2^10 pages.
The page size is not necessarily 4KB. Keep this in mind when
choosing a value for this option.
@@ -271,17 +271,15 @@ config ARCH_SPARSEMEM_DEFAULT
config ARCH_FORCE_MAX_ORDER
int "Maximum zone order"
- default "13"
+ default "12"
help
The kernel memory allocator divides physically contiguous memory
blocks into "zones", where each zone is a power of two number of
pages. This option selects the largest power of two that the kernel
keeps in the memory allocator. If you need to allocate very large
blocks of physically contiguous memory, then you may need to
- increase this value.
-
- This config option is actually maximum order plus one. For example,
- a value of 13 means that the largest free memory block is 2^12 pages.
+ increase this value. A value of 12 means that the largest free memory
+ block is 2^12 pages.
if SPARC64
source "kernel/power/Kconfig"
@@ -193,7 +193,7 @@ static void *dma_4v_alloc_coherent(struct device *dev, size_t size,
size = IO_PAGE_ALIGN(size);
order = get_order(size);
- if (unlikely(order >= MAX_ORDER))
+ if (unlikely(order > MAX_ORDER))
return NULL;
npages = size >> IO_PAGE_SHIFT;
@@ -897,7 +897,7 @@ void __init cheetah_ecache_flush_init(void)
/* Now allocate error trap reporting scoreboard. */
sz = NR_CPUS * (2 * sizeof(struct cheetah_err_info));
- for (order = 0; order < MAX_ORDER; order++) {
+ for (order = 0; order <= MAX_ORDER; order++) {
if ((PAGE_SIZE << order) >= sz)
break;
}
@@ -773,17 +773,15 @@ config HIGHMEM
config ARCH_FORCE_MAX_ORDER
int "Maximum zone order"
- default "11"
+ default "10"
help
The kernel memory allocator divides physically contiguous memory
blocks into "zones", where each zone is a power of two number of
pages. This option selects the largest power of two that the kernel
keeps in the memory allocator. If you need to allocate very large
blocks of physically contiguous memory, then you may need to
- increase this value.
-
- This config option is actually maximum order plus one. For example,
- a value of 11 means that the largest free memory block is 2^10 pages.
+ increase this value. A value of 10 means that the largest free memory
+ block is 2^10 pages.
endmenu
@@ -226,8 +226,8 @@ static ssize_t regmap_read_debugfs(struct regmap *map, unsigned int from,
if (*ppos < 0 || !count)
return -EINVAL;
- if (count > (PAGE_SIZE << (MAX_ORDER - 1)))
- count = PAGE_SIZE << (MAX_ORDER - 1);
+ if (count > (PAGE_SIZE << MAX_ORDER))
+ count = PAGE_SIZE << MAX_ORDER;
buf = kmalloc(count, GFP_KERNEL);
if (!buf)
@@ -373,8 +373,8 @@ static ssize_t regmap_reg_ranges_read_file(struct file *file,
if (*ppos < 0 || !count)
return -EINVAL;
- if (count > (PAGE_SIZE << (MAX_ORDER - 1)))
- count = PAGE_SIZE << (MAX_ORDER - 1);
+ if (count > (PAGE_SIZE << MAX_ORDER))
+ count = PAGE_SIZE << MAX_ORDER;
buf = kmalloc(count, GFP_KERNEL);
if (!buf)
@@ -70,11 +70,11 @@ struct hisi_acc_sgl_pool *hisi_acc_create_sgl_pool(struct device *dev,
HISI_ACC_SGL_ALIGN_SIZE);
/*
- * the pool may allocate a block of memory of size PAGE_SIZE * 2^(MAX_ORDER - 1),
+ * the pool may allocate a block of memory of size PAGE_SIZE * 2^MAX_ORDER,
* block size may exceed 2^31 on ia64, so the max of block size is 2^31
*/
- block_size = 1 << (PAGE_SHIFT + MAX_ORDER <= 32 ?
- PAGE_SHIFT + MAX_ORDER - 1 : 31);
+ block_size = 1 << (PAGE_SHIFT + MAX_ORDER <= 31 ?
+ PAGE_SHIFT + MAX_ORDER : 31);
sgl_num_per_block = block_size / sgl_size;
block_num = count / sgl_num_per_block;
remain_sgl = count % sgl_num_per_block;
@@ -111,7 +111,7 @@ static int get_huge_pages(struct drm_i915_gem_object *obj)
do {
struct page *page;
- GEM_BUG_ON(order >= MAX_ORDER);
+ GEM_BUG_ON(order > MAX_ORDER);
page = alloc_pages(GFP | __GFP_ZERO, order);
if (!page)
goto err;
@@ -64,11 +64,11 @@ module_param(page_pool_size, ulong, 0644);
static atomic_long_t allocated_pages;
-static struct ttm_pool_type global_write_combined[MAX_ORDER];
-static struct ttm_pool_type global_uncached[MAX_ORDER];
+static struct ttm_pool_type global_write_combined[MAX_ORDER + 1];
+static struct ttm_pool_type global_uncached[MAX_ORDER + 1];
-static struct ttm_pool_type global_dma32_write_combined[MAX_ORDER];
-static struct ttm_pool_type global_dma32_uncached[MAX_ORDER];
+static struct ttm_pool_type global_dma32_write_combined[MAX_ORDER + 1];
+static struct ttm_pool_type global_dma32_uncached[MAX_ORDER + 1];
static spinlock_t shrinker_lock;
static struct list_head shrinker_list;
@@ -382,7 +382,7 @@ int ttm_pool_alloc(struct ttm_pool *pool, struct ttm_tt *tt,
else
gfp_flags |= GFP_HIGHUSER;
- for (order = min_t(unsigned int, MAX_ORDER - 1, __fls(num_pages));
+ for (order = min_t(unsigned int, MAX_ORDER, __fls(num_pages));
num_pages;
order = min_t(unsigned int, order, __fls(num_pages))) {
bool apply_caching = false;
@@ -507,7 +507,7 @@ void ttm_pool_init(struct ttm_pool *pool, struct device *dev,
if (use_dma_alloc) {
for (i = 0; i < TTM_NUM_CACHING_TYPES; ++i)
- for (j = 0; j < MAX_ORDER; ++j)
+ for (j = 0; j <= MAX_ORDER; ++j)
ttm_pool_type_init(&pool->caching[i].orders[j],
pool, i, j);
}
@@ -527,7 +527,7 @@ void ttm_pool_fini(struct ttm_pool *pool)
if (pool->use_dma_alloc) {
for (i = 0; i < TTM_NUM_CACHING_TYPES; ++i)
- for (j = 0; j < MAX_ORDER; ++j)
+ for (j = 0; j <= MAX_ORDER; ++j)
ttm_pool_type_fini(&pool->caching[i].orders[j]);
}
@@ -581,7 +581,7 @@ static void ttm_pool_debugfs_header(struct seq_file *m)
unsigned int i;
seq_puts(m, "\t ");
- for (i = 0; i < MAX_ORDER; ++i)
+ for (i = 0; i <= MAX_ORDER; ++i)
seq_printf(m, " ---%2u---", i);
seq_puts(m, "\n");
}
@@ -592,7 +592,7 @@ static void ttm_pool_debugfs_orders(struct ttm_pool_type *pt,
{
unsigned int i;
- for (i = 0; i < MAX_ORDER; ++i)
+ for (i = 0; i <= MAX_ORDER; ++i)
seq_printf(m, " %8u", ttm_pool_type_count(&pt[i]));
seq_puts(m, "\n");
}
@@ -701,7 +701,7 @@ int ttm_pool_mgr_init(unsigned long num_pages)
spin_lock_init(&shrinker_lock);
INIT_LIST_HEAD(&shrinker_list);
- for (i = 0; i < MAX_ORDER; ++i) {
+ for (i = 0; i <= MAX_ORDER; ++i) {
ttm_pool_type_init(&global_write_combined[i], NULL,
ttm_write_combined, i);
ttm_pool_type_init(&global_uncached[i], NULL, ttm_uncached, i);
@@ -734,7 +734,7 @@ void ttm_pool_mgr_fini(void)
{
unsigned int i;
- for (i = 0; i < MAX_ORDER; ++i) {
+ for (i = 0; i <= MAX_ORDER; ++i) {
ttm_pool_type_fini(&global_write_combined[i]);
ttm_pool_type_fini(&global_uncached[i]);
@@ -182,7 +182,7 @@
#ifdef CONFIG_CMA_ALIGNMENT
#define Q_MAX_SZ_SHIFT (PAGE_SHIFT + CONFIG_CMA_ALIGNMENT)
#else
-#define Q_MAX_SZ_SHIFT (PAGE_SHIFT + MAX_ORDER - 1)
+#define Q_MAX_SZ_SHIFT (PAGE_SHIFT + MAX_ORDER)
#endif
/*
@@ -2438,8 +2438,8 @@ static bool its_parse_indirect_baser(struct its_node *its,
* feature is not supported by hardware.
*/
new_order = max_t(u32, get_order(esz << ids), new_order);
- if (new_order >= MAX_ORDER) {
- new_order = MAX_ORDER - 1;
+ if (new_order > MAX_ORDER) {
+ new_order = MAX_ORDER;
ids = ilog2(PAGE_ORDER_TO_SIZE(new_order) / (int)esz);
pr_warn("ITS@%pa: %s Table too large, reduce ids %llu->%u\n",
&its->phys_base, its_base_type_string[type],
@@ -407,7 +407,7 @@ static void __cache_size_refresh(void)
* If the allocation may fail we use __get_free_pages. Memory fragmentation
* won't have a fatal effect here, but it just causes flushes of some other
* buffers and more I/O will be performed. Don't use __get_free_pages if it
- * always fails (i.e. order >= MAX_ORDER).
+ * always fails (i.e. order > MAX_ORDER).
*
* If the allocation shouldn't fail we use __vmalloc. This is only for the
* initial reserve allocation, so there's no risk of wasting all vmalloc
@@ -210,7 +210,7 @@ u32 genwqe_crc32(u8 *buff, size_t len, u32 init)
void *__genwqe_alloc_consistent(struct genwqe_dev *cd, size_t size,
dma_addr_t *dma_handle)
{
- if (get_order(size) >= MAX_ORDER)
+ if (get_order(size) > MAX_ORDER)
return NULL;
return dma_alloc_coherent(&cd->pci_dev->dev, size, dma_handle,
@@ -75,7 +75,7 @@
* pool for the 4MB. Thus the 16 Rx and Tx queues require 32 * 5 = 160
* plus 16 for the TSO pools for a total of 176 LTB mappings per VNIC.
*/
-#define IBMVNIC_ONE_LTB_MAX ((u32)((1 << (MAX_ORDER - 1)) * PAGE_SIZE))
+#define IBMVNIC_ONE_LTB_MAX ((u32)((1 << MAX_ORDER) * PAGE_SIZE))
#define IBMVNIC_ONE_LTB_SIZE min((u32)(8 << 20), IBMVNIC_ONE_LTB_MAX)
#define IBMVNIC_LTB_SET_SIZE (38 << 20)
@@ -944,8 +944,8 @@ static phys_addr_t hvfb_get_phymem(struct hv_device *hdev,
if (request_size == 0)
return -1;
- if (order < MAX_ORDER) {
- /* Call alloc_pages if the size is less than 2^MAX_ORDER */
+ if (order <= MAX_ORDER) {
+ /* Call alloc_pages if the size is no greater than 2^MAX_ORDER */
page = alloc_pages(GFP_KERNEL | __GFP_ZERO, order);
if (!page)
return -1;
@@ -975,7 +975,7 @@ static void hvfb_release_phymem(struct hv_device *hdev,
{
unsigned int order = get_order(size);
- if (order < MAX_ORDER)
+ if (order <= MAX_ORDER)
__free_pages(pfn_to_page(paddr >> PAGE_SHIFT), order);
else
dma_free_coherent(&hdev->device,
@@ -33,7 +33,7 @@
#define VIRTIO_BALLOON_FREE_PAGE_ALLOC_FLAG (__GFP_NORETRY | __GFP_NOWARN | \
__GFP_NOMEMALLOC)
/* The order of free page blocks to report to host */
-#define VIRTIO_BALLOON_HINT_BLOCK_ORDER (MAX_ORDER - 1)
+#define VIRTIO_BALLOON_HINT_BLOCK_ORDER MAX_ORDER
/* The size of a free page block in bytes */
#define VIRTIO_BALLOON_HINT_BLOCK_BYTES \
(1 << (VIRTIO_BALLOON_HINT_BLOCK_ORDER + PAGE_SHIFT))
@@ -1120,13 +1120,13 @@ static void virtio_mem_clear_fake_offline(unsigned long pfn,
*/
static void virtio_mem_fake_online(unsigned long pfn, unsigned long nr_pages)
{
- unsigned long order = MAX_ORDER - 1;
+ unsigned long order = MAX_ORDER;
unsigned long i;
/*
* We might get called for ranges that don't cover properly aligned
- * MAX_ORDER - 1 pages; however, we can only online properly aligned
- * pages with an order of MAX_ORDER - 1 at maximum.
+ * MAX_ORDER pages; however, we can only online properly aligned
+ * pages with an order of MAX_ORDER at maximum.
*/
while (!IS_ALIGNED(pfn | nr_pages, 1 << order))
order--;
@@ -1237,7 +1237,7 @@ static void virtio_mem_online_page(struct virtio_mem *vm,
bool do_online;
/*
- * We can get called with any order up to MAX_ORDER - 1. If our
+ * We can get called with any order up to MAX_ORDER. If our
* subblock size is smaller than that and we have a mixture of plugged
* and unplugged subblocks within such a page, we have to process in
* smaller granularity. In that case we'll adjust the order exactly once
@@ -70,7 +70,7 @@ int ramfs_nommu_expand_for_mapping(struct inode *inode, size_t newsize)
/* make various checks */
order = get_order(newsize);
- if (unlikely(order >= MAX_ORDER))
+ if (unlikely(order > MAX_ORDER))
return -EFBIG;
ret = inode_newsize_ok(inode, newsize);
@@ -72,7 +72,7 @@ struct ttm_pool {
bool use_dma32;
struct {
- struct ttm_pool_type orders[MAX_ORDER];
+ struct ttm_pool_type orders[MAX_ORDER + 1];
} caching[TTM_NUM_CACHING_TYPES];
};
@@ -746,7 +746,7 @@ static inline unsigned huge_page_shift(struct hstate *h)
static inline bool hstate_is_gigantic(struct hstate *h)
{
- return huge_page_order(h) >= MAX_ORDER;
+ return huge_page_order(h) > MAX_ORDER;
}
static inline unsigned int pages_per_huge_page(const struct hstate *h)
@@ -25,11 +25,11 @@
/* Free memory management - zoned buddy allocator. */
#ifndef CONFIG_ARCH_FORCE_MAX_ORDER
-#define MAX_ORDER 11
+#define MAX_ORDER 10
#else
#define MAX_ORDER CONFIG_ARCH_FORCE_MAX_ORDER
#endif
-#define MAX_ORDER_NR_PAGES (1 << (MAX_ORDER - 1))
+#define MAX_ORDER_NR_PAGES (1 << MAX_ORDER)
/*
* PAGE_ALLOC_COSTLY_ORDER is the order at which allocations are deemed
@@ -92,7 +92,7 @@ static inline bool migratetype_is_mergeable(int mt)
}
#define for_each_migratetype_order(order, type) \
- for (order = 0; order < MAX_ORDER; order++) \
+ for (order = 0; order <= MAX_ORDER; order++) \
for (type = 0; type < MIGRATE_TYPES; type++)
extern int page_group_by_mobility_disabled;
@@ -632,7 +632,7 @@ struct zone {
ZONE_PADDING(_pad1_)
/* free areas of different sizes */
- struct free_area free_area[MAX_ORDER];
+ struct free_area free_area[MAX_ORDER + 1];
/* zone flags, see below */
unsigned long flags;
@@ -1379,7 +1379,7 @@ static inline bool movable_only_nodes(nodemask_t *nodes)
#define SECTION_BLOCKFLAGS_BITS \
((1UL << (PFN_SECTION_SHIFT - pageblock_order)) * NR_PAGEBLOCK_BITS)
-#if (MAX_ORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS
+#if (MAX_ORDER + PAGE_SHIFT) > SECTION_SIZE_BITS
#error Allocator MAX_ORDER exceeds SECTION_SIZE
#endif
@@ -41,14 +41,14 @@ extern unsigned int pageblock_order;
* Huge pages are a constant size, but don't exceed the maximum allocation
* granularity.
*/
-#define pageblock_order min_t(unsigned int, HUGETLB_PAGE_ORDER, MAX_ORDER - 1)
+#define pageblock_order min_t(unsigned int, HUGETLB_PAGE_ORDER, MAX_ORDER)
#endif /* CONFIG_HUGETLB_PAGE_SIZE_VARIABLE */
#else /* CONFIG_HUGETLB_PAGE */
/* If huge pages are not used, group by MAX_ORDER_NR_PAGES */
-#define pageblock_order (MAX_ORDER-1)
+#define pageblock_order MAX_ORDER
#endif /* CONFIG_HUGETLB_PAGE */
@@ -251,8 +251,8 @@ static inline unsigned int arch_slab_minalign(void)
* to do various tricks to work around compiler limitations in order to
* ensure proper constant folding.
*/
-#define KMALLOC_SHIFT_HIGH ((MAX_ORDER + PAGE_SHIFT - 1) <= 25 ? \
- (MAX_ORDER + PAGE_SHIFT - 1) : 25)
+#define KMALLOC_SHIFT_HIGH ((MAX_ORDER + PAGE_SHIFT) <= 25 ? \
+ (MAX_ORDER + PAGE_SHIFT) : 25)
#define KMALLOC_SHIFT_MAX KMALLOC_SHIFT_HIGH
#ifndef KMALLOC_SHIFT_LOW
#define KMALLOC_SHIFT_LOW 5
@@ -265,7 +265,7 @@ static inline unsigned int arch_slab_minalign(void)
* (PAGE_SIZE*2). Larger requests are passed to the page allocator.
*/
#define KMALLOC_SHIFT_HIGH (PAGE_SHIFT + 1)
-#define KMALLOC_SHIFT_MAX (MAX_ORDER + PAGE_SHIFT - 1)
+#define KMALLOC_SHIFT_MAX (MAX_ORDER + PAGE_SHIFT)
#ifndef KMALLOC_SHIFT_LOW
#define KMALLOC_SHIFT_LOW 3
#endif
@@ -278,7 +278,7 @@ static inline unsigned int arch_slab_minalign(void)
* be allocated from the same page.
*/
#define KMALLOC_SHIFT_HIGH PAGE_SHIFT
-#define KMALLOC_SHIFT_MAX (MAX_ORDER + PAGE_SHIFT - 1)
+#define KMALLOC_SHIFT_MAX (MAX_ORDER + PAGE_SHIFT)
#ifndef KMALLOC_SHIFT_LOW
#define KMALLOC_SHIFT_LOW 3
#endif
@@ -471,7 +471,7 @@ static int __init crash_save_vmcoreinfo_init(void)
VMCOREINFO_OFFSET(list_head, prev);
VMCOREINFO_OFFSET(vmap_area, va_start);
VMCOREINFO_OFFSET(vmap_area, list);
- VMCOREINFO_LENGTH(zone.free_area, MAX_ORDER);
+ VMCOREINFO_LENGTH(zone.free_area, MAX_ORDER + 1);
log_buf_vmcoreinfo_setup();
VMCOREINFO_LENGTH(free_area.free_list, MIGRATE_TYPES);
VMCOREINFO_NUMBER(NR_FREE_PAGES);
@@ -84,8 +84,8 @@ static int atomic_pool_expand(struct gen_pool *pool, size_t pool_size,
void *addr;
int ret = -ENOMEM;
- /* Cannot allocate larger than MAX_ORDER-1 */
- order = min(get_order(pool_size), MAX_ORDER-1);
+ /* Cannot allocate larger than MAX_ORDER */
+ order = min(get_order(pool_size), MAX_ORDER);
do {
pool_size = 1 << (PAGE_SHIFT + order);
@@ -190,7 +190,7 @@ static int __init dma_atomic_pool_init(void)
/*
* If coherent_pool was not used on the command line, default the pool
- * sizes to 128KB per 1GB of memory, min 128KB, max MAX_ORDER-1.
+ * sizes to 128KB per 1GB of memory, min 128KB, max MAX_ORDER.
*/
if (!atomic_pool_size) {
unsigned long pages = totalram_pages() / (SZ_1G / SZ_128K);
@@ -307,7 +307,7 @@ config SHUFFLE_PAGE_ALLOCATOR
the presence of a memory-side-cache. There are also incidental
security benefits as it reduces the predictability of page
allocations to compliment SLAB_FREELIST_RANDOM, but the
- default granularity of shuffling on the "MAX_ORDER - 1" i.e,
+ default granularity of shuffling on the "MAX_ORDER" i.e,
10th order of pages is selected based on cache utilization
benefits on x86.
@@ -621,8 +621,8 @@ config HUGETLB_PAGE_SIZE_VARIABLE
HUGETLB_PAGE_ORDER when there are multiple HugeTLB page sizes available
on a platform.
- Note that the pageblock_order cannot exceed MAX_ORDER - 1 and will be
- clamped down to MAX_ORDER - 1.
+ Note that the pageblock_order cannot exceed MAX_ORDER and will be
+ clamped down to MAX_ORDER.
config CONTIG_ALLOC
def_bool (MEMORY_ISOLATION && COMPACTION) || CMA
@@ -586,7 +586,7 @@ static unsigned long isolate_freepages_block(struct compact_control *cc,
if (PageCompound(page)) {
const unsigned int order = compound_order(page);
- if (likely(order < MAX_ORDER)) {
+ if (likely(order <= MAX_ORDER)) {
blockpfn += (1UL << order) - 1;
cursor += (1UL << order) - 1;
}
@@ -941,7 +941,7 @@ isolate_migratepages_block(struct compact_control *cc, unsigned long low_pfn,
* a valid page order. Consider only values in the
* valid order range to prevent low_pfn overflow.
*/
- if (freepage_order > 0 && freepage_order < MAX_ORDER)
+ if (freepage_order > 0 && freepage_order <= MAX_ORDER)
low_pfn += (1UL << freepage_order) - 1;
continue;
}
@@ -957,7 +957,7 @@ isolate_migratepages_block(struct compact_control *cc, unsigned long low_pfn,
if (PageCompound(page) && !cc->alloc_contig) {
const unsigned int order = compound_order(page);
- if (likely(order < MAX_ORDER))
+ if (likely(order <= MAX_ORDER))
low_pfn += (1UL << order) - 1;
goto isolate_fail;
}
@@ -2118,7 +2118,7 @@ static enum compact_result __compact_finished(struct compact_control *cc)
/* Direct compactor: Is a suitable page free? */
ret = COMPACT_NO_SUITABLE_PAGE;
- for (order = cc->order; order < MAX_ORDER; order++) {
+ for (order = cc->order; order <= MAX_ORDER; order++) {
struct free_area *area = &cc->zone->free_area[order];
bool can_steal;
@@ -1094,7 +1094,7 @@ debug_vm_pgtable_alloc_huge_page(struct pgtable_debug_args *args, int order)
struct page *page = NULL;
#ifdef CONFIG_CONTIG_ALLOC
- if (order >= MAX_ORDER) {
+ if (order > MAX_ORDER) {
page = alloc_contig_pages((1 << order), GFP_KERNEL,
first_online_node, NULL);
if (page) {
@@ -1104,7 +1104,7 @@ debug_vm_pgtable_alloc_huge_page(struct pgtable_debug_args *args, int order)
}
#endif
- if (order < MAX_ORDER)
+ if (order <= MAX_ORDER)
page = alloc_pages(GFP_KERNEL, order);
return page;
@@ -469,7 +469,7 @@ static int __init hugepage_init(void)
/*
* hugepages can't be allocated by the buddy allocator
*/
- MAYBE_BUILD_BUG_ON(HPAGE_PMD_ORDER >= MAX_ORDER);
+ MAYBE_BUILD_BUG_ON(HPAGE_PMD_ORDER > MAX_ORDER);
/*
* we use page->mapping and page->index in second tail page
* as list_head: assuming THP order >= 2
@@ -1903,7 +1903,7 @@ pgoff_t hugetlb_basepage_index(struct page *page)
pgoff_t index = page_index(page_head);
unsigned long compound_idx;
- if (compound_order(page_head) >= MAX_ORDER)
+ if (compound_order(page_head) > MAX_ORDER)
compound_idx = page_to_pfn(page) - page_to_pfn(page_head);
else
compound_idx = page - page_head;
@@ -4313,7 +4313,7 @@ static int __init default_hugepagesz_setup(char *s)
* The number of default huge pages (for this size) could have been
* specified as the first hugetlb parameter: hugepages=X. If so,
* then default_hstate_max_huge_pages is set. If the default huge
- * page size is gigantic (>= MAX_ORDER), then the pages must be
+ * page size is gigantic (> MAX_ORDER), then the pages must be
* allocated here from bootmem allocator.
*/
if (default_hstate_max_huge_pages) {
@@ -2030,7 +2030,7 @@ static void __init __free_pages_memory(unsigned long start, unsigned long end)
int order;
while (start < end) {
- order = min(MAX_ORDER - 1UL, __ffs(start));
+ order = min_t(unsigned long, MAX_ORDER, __ffs(start));
while (start + (1UL << order) > end)
order--;
@@ -596,7 +596,7 @@ static void online_pages_range(unsigned long start_pfn, unsigned long nr_pages)
unsigned long pfn;
/*
- * Online the pages in MAX_ORDER - 1 aligned chunks. The callback might
+ * Online the pages in MAX_ORDER aligned chunks. The callback might
* decide to not expose all pages to the buddy (e.g., expose them
* later). We account all pages as being online and belonging to this
* zone ("present").
@@ -605,7 +605,7 @@ static void online_pages_range(unsigned long start_pfn, unsigned long nr_pages)
* this and the first chunk to online will be pageblock_nr_pages.
*/
for (pfn = start_pfn; pfn < end_pfn;) {
- int order = min(MAX_ORDER - 1UL, __ffs(pfn));
+ int order = min_t(unsigned long, MAX_ORDER, __ffs(pfn));
(*online_page_callback)(pfn_to_page(pfn), order);
pfn += (1UL << order);
@@ -847,7 +847,7 @@ static int __init debug_guardpage_minorder_setup(char *buf)
{
unsigned long res;
- if (kstrtoul(buf, 10, &res) < 0 || res > MAX_ORDER / 2) {
+ if (kstrtoul(buf, 10, &res) < 0 || res > (MAX_ORDER + 1) / 2) {
pr_err("Bad debug_guardpage_minorder value\n");
return 0;
}
@@ -1065,7 +1065,7 @@ buddy_merge_likely(unsigned long pfn, unsigned long buddy_pfn,
unsigned long higher_page_pfn;
struct page *higher_page;
- if (order >= MAX_ORDER - 2)
+ if (order >= MAX_ORDER - 1)
return false;
higher_page_pfn = buddy_pfn & pfn;
@@ -1120,7 +1120,7 @@ static inline void __free_one_page(struct page *page,
VM_BUG_ON_PAGE(pfn & ((1 << order) - 1), page);
VM_BUG_ON_PAGE(bad_range(zone, page), page);
- while (order < MAX_ORDER - 1) {
+ while (order < MAX_ORDER) {
if (compaction_capture(capc, page, order, migratetype)) {
__mod_zone_freepage_state(zone, -(1 << order),
migratetype);
@@ -2559,7 +2559,7 @@ struct page *__rmqueue_smallest(struct zone *zone, unsigned int order,
struct page *page;
/* Find a page of the appropriate size in the preferred list */
- for (current_order = order; current_order < MAX_ORDER; ++current_order) {
+ for (current_order = order; current_order <= MAX_ORDER; ++current_order) {
area = &(zone->free_area[current_order]);
page = get_page_from_free_area(area, migratetype);
if (!page)
@@ -2934,7 +2934,7 @@ static bool unreserve_highatomic_pageblock(const struct alloc_context *ac,
continue;
spin_lock_irqsave(&zone->lock, flags);
- for (order = 0; order < MAX_ORDER; order++) {
+ for (order = 0; order <= MAX_ORDER; order++) {
struct free_area *area = &(zone->free_area[order]);
page = get_page_from_free_area(area, MIGRATE_HIGHATOMIC);
@@ -3018,7 +3018,7 @@ __rmqueue_fallback(struct zone *zone, int order, int start_migratetype,
* approximates finding the pageblock with the most free pages, which
* would be too costly to do exactly.
*/
- for (current_order = MAX_ORDER - 1; current_order >= min_order;
+ for (current_order = MAX_ORDER; current_order >= min_order;
--current_order) {
area = &(zone->free_area[current_order]);
fallback_mt = find_suitable_fallback(area, current_order,
@@ -3044,7 +3044,7 @@ __rmqueue_fallback(struct zone *zone, int order, int start_migratetype,
return false;
find_smallest:
- for (current_order = order; current_order < MAX_ORDER;
+ for (current_order = order; current_order <= MAX_ORDER;
current_order++) {
area = &(zone->free_area[current_order]);
fallback_mt = find_suitable_fallback(area, current_order,
@@ -3057,7 +3057,7 @@ __rmqueue_fallback(struct zone *zone, int order, int start_migratetype,
* This should not happen - we already found a suitable fallback
* when looking for the largest page.
*/
- VM_BUG_ON(current_order == MAX_ORDER);
+ VM_BUG_ON(current_order == MAX_ORDER + 1);
do_steal:
page = get_page_from_free_area(area, fallback_mt);
@@ -4005,7 +4005,7 @@ bool __zone_watermark_ok(struct zone *z, unsigned int order, unsigned long mark,
return true;
/* For a high-order request, check at least one suitable page is free */
- for (o = order; o < MAX_ORDER; o++) {
+ for (o = order; o <= MAX_ORDER; o++) {
struct free_area *area = &z->free_area[o];
int mt;
@@ -5480,7 +5480,7 @@ struct page *__alloc_pages(gfp_t gfp, unsigned int order, int preferred_nid,
* There are several places where we assume that the order value is sane
* so bail out early if the request is out of bound.
*/
- if (WARN_ON_ONCE_GFP(order >= MAX_ORDER, gfp))
+ if (WARN_ON_ONCE_GFP(order > MAX_ORDER, gfp))
return NULL;
gfp &= gfp_allowed_mask;
@@ -6183,8 +6183,8 @@ void show_free_areas(unsigned int filter, nodemask_t *nodemask)
for_each_populated_zone(zone) {
unsigned int order;
- unsigned long nr[MAX_ORDER], flags, total = 0;
- unsigned char types[MAX_ORDER];
+ unsigned long nr[MAX_ORDER + 1], flags, total = 0;
+ unsigned char types[MAX_ORDER + 1];
if (show_mem_node_skip(filter, zone_to_nid(zone), nodemask))
continue;
@@ -6192,7 +6192,7 @@ void show_free_areas(unsigned int filter, nodemask_t *nodemask)
printk(KERN_CONT "%s: ", zone->name);
spin_lock_irqsave(&zone->lock, flags);
- for (order = 0; order < MAX_ORDER; order++) {
+ for (order = 0; order <= MAX_ORDER; order++) {
struct free_area *area = &zone->free_area[order];
int type;
@@ -6206,7 +6206,7 @@ void show_free_areas(unsigned int filter, nodemask_t *nodemask)
}
}
spin_unlock_irqrestore(&zone->lock, flags);
- for (order = 0; order < MAX_ORDER; order++) {
+ for (order = 0; order <= MAX_ORDER; order++) {
printk(KERN_CONT "%lu*%lukB ",
nr[order], K(1UL) << order);
if (nr[order])
@@ -7545,7 +7545,7 @@ static inline void setup_usemap(struct zone *zone) {}
/* Initialise the number of pages represented by NR_PAGEBLOCK_BITS */
void __init set_pageblock_order(void)
{
- unsigned int order = MAX_ORDER - 1;
+ unsigned int order = MAX_ORDER;
/* Check that pageblock_nr_pages has not already been setup */
if (pageblock_order)
@@ -9051,7 +9051,7 @@ void *__init alloc_large_system_hash(const char *tablename,
else
table = memblock_alloc_raw(size,
SMP_CACHE_BYTES);
- } else if (get_order(size) >= MAX_ORDER || hashdist) {
+ } else if (get_order(size) > MAX_ORDER || hashdist) {
table = vmalloc_huge(size, gfp_flags);
virt = true;
if (table)
@@ -9265,7 +9265,7 @@ int alloc_contig_range(unsigned long start, unsigned long end,
order = 0;
outer_start = start;
while (!PageBuddy(pfn_to_page(outer_start))) {
- if (++order >= MAX_ORDER) {
+ if (++order > MAX_ORDER) {
outer_start = start;
break;
}
@@ -9524,7 +9524,7 @@ bool is_free_buddy_page(struct page *page)
unsigned long pfn = page_to_pfn(page);
unsigned int order;
- for (order = 0; order < MAX_ORDER; order++) {
+ for (order = 0; order <= MAX_ORDER; order++) {
struct page *page_head = page - (pfn & ((1 << order) - 1));
if (PageBuddy(page_head) &&
@@ -9532,7 +9532,7 @@ bool is_free_buddy_page(struct page *page)
break;
}
- return order < MAX_ORDER;
+ return order <= MAX_ORDER;
}
EXPORT_SYMBOL(is_free_buddy_page);
@@ -9583,7 +9583,7 @@ bool take_page_off_buddy(struct page *page)
bool ret = false;
spin_lock_irqsave(&zone->lock, flags);
- for (order = 0; order < MAX_ORDER; order++) {
+ for (order = 0; order <= MAX_ORDER; order++) {
struct page *page_head = page - (pfn & ((1 << order) - 1));
int page_order = buddy_order(page_head);
@@ -226,7 +226,7 @@ static void unset_migratetype_isolate(struct page *page, int migratetype)
*/
if (PageBuddy(page)) {
order = buddy_order(page);
- if (order >= pageblock_order && order < MAX_ORDER - 1) {
+ if (order >= pageblock_order && order <= MAX_ORDER) {
buddy = find_buddy_page_pfn(page, page_to_pfn(page),
order, NULL);
if (buddy && !is_migrate_isolate_page(buddy)) {
@@ -289,11 +289,11 @@ __first_valid_page(unsigned long pfn, unsigned long nr_pages)
* @skip_isolation: the flag to skip the pageblock isolation in second
* isolate_single_pageblock()
*
- * Free and in-use pages can be as big as MAX_ORDER-1 and contain more than one
+ * Free and in-use pages can be as big as MAX_ORDER and contain more than one
* pageblock. When not all pageblocks within a page are isolated at the same
* time, free page accounting can go wrong. For example, in the case of
- * MAX_ORDER-1 = pageblock_order + 1, a MAX_ORDER-1 page has two pagelbocks.
- * [ MAX_ORDER-1 ]
+ * MAX_ORDER = pageblock_order + 1, a MAX_ORDER page has two pagelbocks.
+ * [ MAX_ORDER ]
* [ pageblock0 | pageblock1 ]
* When either pageblock is isolated, if it is a free page, the page is not
* split into separate migratetype lists, which is supposed to; if it is an
@@ -450,7 +450,7 @@ static int isolate_single_pageblock(unsigned long boundary_pfn, int flags,
* the free page to the right migratetype list.
*
* head_pfn is not used here as a hugetlb page order
- * can be bigger than MAX_ORDER-1, but after it is
+ * can be bigger than MAX_ORDER, but after it is
* freed, the free page order is not. Use pfn within
* the range to find the head of the free page.
*/
@@ -458,7 +458,7 @@ static int isolate_single_pageblock(unsigned long boundary_pfn, int flags,
outer_pfn = pfn;
while (!PageBuddy(pfn_to_page(outer_pfn))) {
/* stop if we cannot find the free page */
- if (++order >= MAX_ORDER)
+ if (++order > MAX_ORDER)
goto failed;
outer_pfn &= ~0UL << order;
}
@@ -639,7 +639,7 @@ int test_pages_isolated(unsigned long start_pfn, unsigned long end_pfn,
int ret;
/*
- * Note: pageblock_nr_pages != MAX_ORDER. Then, chunks of free pages
+ * Note: pageblock_order != MAX_ORDER. Then, chunks of free pages
* are not aligned to pageblock_nr_pages.
* Then we just check migratetype first.
*/
@@ -318,7 +318,7 @@ void pagetypeinfo_showmixedcount_print(struct seq_file *m,
unsigned long freepage_order;
freepage_order = buddy_order_unsafe(page);
- if (freepage_order < MAX_ORDER)
+ if (freepage_order <= MAX_ORDER)
pfn += (1UL << freepage_order) - 1;
continue;
}
@@ -552,7 +552,7 @@ read_page_owner(struct file *file, char __user *buf, size_t count, loff_t *ppos)
if (PageBuddy(page)) {
unsigned long freepage_order = buddy_order_unsafe(page);
- if (freepage_order < MAX_ORDER)
+ if (freepage_order <= MAX_ORDER)
pfn += (1UL << freepage_order) - 1;
continue;
}
@@ -645,7 +645,7 @@ static void init_pages_in_zone(pg_data_t *pgdat, struct zone *zone)
if (PageBuddy(page)) {
unsigned long order = buddy_order_unsafe(page);
- if (order > 0 && order < MAX_ORDER)
+ if (order > 0 && order <= MAX_ORDER)
pfn += (1UL << order) - 1;
continue;
}
@@ -11,7 +11,7 @@
#include "page_reporting.h"
#include "internal.h"
-unsigned int page_reporting_order = MAX_ORDER;
+unsigned int page_reporting_order = MAX_ORDER + 1;
module_param(page_reporting_order, uint, 0644);
MODULE_PARM_DESC(page_reporting_order, "Set page reporting order");
@@ -244,7 +244,7 @@ page_reporting_process_zone(struct page_reporting_dev_info *prdev,
return err;
/* Process each free list starting from lowest order/mt */
- for (order = page_reporting_order; order < MAX_ORDER; order++) {
+ for (order = page_reporting_order; order <= MAX_ORDER; order++) {
for (mt = 0; mt < MIGRATE_TYPES; mt++) {
/* We do not pull pages from the isolate free list */
if (is_migrate_isolate(mt))
@@ -4,7 +4,7 @@
#define _MM_SHUFFLE_H
#include <linux/jump_label.h>
-#define SHUFFLE_ORDER (MAX_ORDER-1)
+#define SHUFFLE_ORDER MAX_ORDER
#ifdef CONFIG_SHUFFLE_PAGE_ALLOCATOR
DECLARE_STATIC_KEY_FALSE(page_alloc_shuffle_key);
@@ -466,7 +466,7 @@ static int __init slab_max_order_setup(char *str)
{
get_option(&str, &slab_max_order);
slab_max_order = slab_max_order < 0 ? 0 :
- min(slab_max_order, MAX_ORDER - 1);
+ min(slab_max_order, MAX_ORDER);
slab_max_order_set = true;
return 1;
@@ -3877,7 +3877,7 @@ static inline int calculate_order(unsigned int size)
* Doh this slab cannot be placed using slub_max_order.
*/
order = calc_slab_order(size, 1, MAX_ORDER, 1);
- if (order < MAX_ORDER)
+ if (order <= MAX_ORDER)
return order;
return -ENOSYS;
}
@@ -4388,7 +4388,7 @@ __setup("slub_min_order=", setup_slub_min_order);
static int __init setup_slub_max_order(char *str)
{
get_option(&str, (int *)&slub_max_order);
- slub_max_order = min(slub_max_order, (unsigned int)MAX_ORDER - 1);
+ slub_max_order = min_t(unsigned int, slub_max_order, MAX_ORDER);
return 1;
}
@@ -1068,7 +1068,7 @@ static void fill_contig_page_info(struct zone *zone,
info->free_blocks_total = 0;
info->free_blocks_suitable = 0;
- for (order = 0; order < MAX_ORDER; order++) {
+ for (order = 0; order <= MAX_ORDER; order++) {
unsigned long blocks;
/*
@@ -1101,7 +1101,7 @@ static int __fragmentation_index(unsigned int order, struct contig_page_info *in
{
unsigned long requested = 1UL << order;
- if (WARN_ON_ONCE(order >= MAX_ORDER))
+ if (WARN_ON_ONCE(order > MAX_ORDER))
return 0;
if (!info->free_blocks_total)
@@ -1474,7 +1474,7 @@ static void frag_show_print(struct seq_file *m, pg_data_t *pgdat,
int order;
seq_printf(m, "Node %d, zone %8s ", pgdat->node_id, zone->name);
- for (order = 0; order < MAX_ORDER; ++order)
+ for (order = 0; order <= MAX_ORDER; ++order)
/*
* Access to nr_free is lockless as nr_free is used only for
* printing purposes. Use data_race to avoid KCSAN warning.
@@ -1503,7 +1503,7 @@ static void pagetypeinfo_showfree_print(struct seq_file *m,
pgdat->node_id,
zone->name,
migratetype_names[mtype]);
- for (order = 0; order < MAX_ORDER; ++order) {
+ for (order = 0; order <= MAX_ORDER; ++order) {
unsigned long freecount = 0;
struct free_area *area;
struct list_head *curr;
@@ -1543,7 +1543,7 @@ static void pagetypeinfo_showfree(struct seq_file *m, void *arg)
/* Print header */
seq_printf(m, "%-43s ", "Free pages count per migrate type at order");
- for (order = 0; order < MAX_ORDER; ++order)
+ for (order = 0; order <= MAX_ORDER; ++order)
seq_printf(m, "%6d ", order);
seq_putc(m, '\n');
@@ -2168,7 +2168,7 @@ static void unusable_show_print(struct seq_file *m,
seq_printf(m, "Node %d, zone %8s ",
pgdat->node_id,
zone->name);
- for (order = 0; order < MAX_ORDER; ++order) {
+ for (order = 0; order <= MAX_ORDER; ++order) {
fill_contig_page_info(zone, order, &info);
index = unusable_free_index(order, &info);
seq_printf(m, "%d.%03d ", index / 1000, index % 1000);
@@ -2220,7 +2220,7 @@ static void extfrag_show_print(struct seq_file *m,
seq_printf(m, "Node %d, zone %8s ",
pgdat->node_id,
zone->name);
- for (order = 0; order < MAX_ORDER; ++order) {
+ for (order = 0; order <= MAX_ORDER; ++order) {
fill_contig_page_info(zone, order, &info);
index = __fragmentation_index(order, &info);
seq_printf(m, "%2d.%03d ", index / 1000, index % 1000);
@@ -843,7 +843,7 @@ long smc_ib_setup_per_ibdev(struct smc_ib_device *smcibdev)
goto out;
/* the calculated number of cq entries fits to mlx5 cq allocation */
cqe_size_order = cache_line_size() == 128 ? 7 : 6;
- smc_order = MAX_ORDER - cqe_size_order - 1;
+ smc_order = MAX_ORDER - cqe_size_order;
if (SMC_MAX_CQE + 2 > (0x00000001 << smc_order) * PAGE_SIZE)
cqattr.cqe = (0x00000001 << smc_order) * PAGE_SIZE - 2;
smcibdev->roce_cq_send = ib_create_cq(smcibdev->ibdev,
@@ -7368,6 +7368,14 @@ sub process {
}
}
+# check for MAX_ORDER uses as its semantics has changed.
+# MAX_ORDER now really means the max order of a page that can come out of
+# kernel buddy allocator
+ if ($line =~ /MAX_ORDER/) {
+ WARN("MAX_ORDER",
+ "MAX_ORDER has changed its semantics. The max order of a page that can be allocated from buddy allocator is MAX_ORDER instead of MAX_ORDER - 1.")
+ }
+
# Mode permission misuses where it seems decimal should be octal
# This uses a shortcut match to avoid unnecessary uses of a slow foreach loop
# o Ignore module_param*(...) uses with a decimal 0 permission as that has a
@@ -38,7 +38,7 @@ static int param_set_bufsize(const char *val, const struct kernel_param *kp)
size = memparse(val, NULL);
order = get_order(size);
- if (order >= MAX_ORDER)
+ if (order > MAX_ORDER)
return -EINVAL;
ima_maxorder = order;
ima_bufsize = PAGE_SIZE << order;
@@ -17,10 +17,10 @@ enum zone_type {
};
#define MAX_NR_ZONES __MAX_NR_ZONES
-#define MAX_ORDER 11
-#define MAX_ORDER_NR_PAGES (1 << (MAX_ORDER - 1))
+#define MAX_ORDER 10
+#define MAX_ORDER_NR_PAGES (1 << MAX_ORDER)
-#define pageblock_order (MAX_ORDER - 1)
+#define pageblock_order MAX_ORDER
#define pageblock_nr_pages BIT(pageblock_order)
struct zone {