@@ -22,6 +22,7 @@ x86-specific Documentation
mtrr
pat
intel-hfi
+ shstk
iommu
intel_txt
amd-memory-encryption
new file mode 100644
@@ -0,0 +1,169 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================================
+Control-flow Enforcement Technology (CET) Shadow Stack
+======================================================
+
+CET Background
+==============
+
+Control-flow Enforcement Technology (CET) covers several related x86 processor
+features that provide protection against control flow hijacking attacks. CET
+can protect both applications and the kernel.
+
+CET introduces shadow stack and indirect branch tracking (IBT). A shadow stack
+is a secondary stack allocated from memory which cannot be directly modified by
+applications. When executing a CALL instruction, the processor pushes the
+return address to both the normal stack and the shadow stack. Upon
+function return, the processor pops the shadow stack copy and compares it
+to the normal stack copy. If the two differ, the processor raises a
+control-protection fault. IBT verifies indirect CALL/JMP targets are intended
+as marked by the compiler with 'ENDBR' opcodes. Not all CPU's have both Shadow
+Stack and Indirect Branch Tracking. Today in the 64-bit kernel, only userspace
+shadow stack and kernel IBT are supported.
+
+Requirements to use Shadow Stack
+================================
+
+To use userspace shadow stack you need HW that supports it, a kernel
+configured with it and userspace libraries compiled with it.
+
+The kernel Kconfig option is X86_USER_SHADOW_STACK. When compiled in, shadow
+stacks can be disabled at runtime with the kernel parameter: nousershstk.
+
+To build a user shadow stack enabled kernel, Binutils v2.29 or LLVM v6 or later
+are required.
+
+At run time, /proc/cpuinfo shows CET features if the processor supports
+CET. "user_shstk" means that userspace shadow stack is supported on the current
+kernel and HW.
+
+Application Enabling
+====================
+
+An application's CET capability is marked in its ELF note and can be verified
+from readelf/llvm-readelf output::
+
+ readelf -n <application> | grep -a SHSTK
+ properties: x86 feature: SHSTK
+
+The kernel does not process these applications markers directly. Applications
+or loaders must enable CET features using the interface described in section 4.
+Typically this would be done in dynamic loader or static runtime objects, as is
+the case in GLIBC.
+
+Enabling arch_prctl()'s
+=======================
+
+Elf features should be enabled by the loader using the below arch_prctl's. They
+are only supported in 64 bit user applications. These operate on the features
+on a per-thread basis. The enablement status is inherited on clone, so if the
+feature is enabled on the first thread, it will propagate to all the thread's
+in an app.
+
+arch_prctl(ARCH_SHSTK_ENABLE, unsigned long feature)
+ Enable a single feature specified in 'feature'. Can only operate on
+ one feature at a time.
+
+arch_prctl(ARCH_SHSTK_DISABLE, unsigned long feature)
+ Disable a single feature specified in 'feature'. Can only operate on
+ one feature at a time.
+
+arch_prctl(ARCH_SHSTK_LOCK, unsigned long features)
+ Lock in features at their current enabled or disabled status. 'features'
+ is a mask of all features to lock. All bits set are processed, unset bits
+ are ignored. The mask is ORed with the existing value. So any feature bits
+ set here cannot be enabled or disabled afterwards.
+
+The return values are as follows. On success, return 0. On error, errno can
+be::
+
+ -EPERM if any of the passed feature are locked.
+ -ENOTSUPP if the feature is not supported by the hardware or
+ kernel.
+ -EINVAL arguments (non existing feature, etc)
+
+The feature's bits supported are::
+
+ ARCH_SHSTK_SHSTK - Shadow stack
+ ARCH_SHSTK_WRSS - WRSS
+
+Currently shadow stack and WRSS are supported via this interface. WRSS
+can only be enabled with shadow stack, and is automatically disabled
+if shadow stack is disabled.
+
+Proc Status
+===========
+To check if an application is actually running with shadow stack, the
+user can read the /proc/$PID/status. It will report "wrss" or "shstk"
+depending on what is enabled. The lines look like this::
+
+ x86_Thread_features: shstk wrss
+ x86_Thread_features_locked: shstk wrss
+
+Implementation of the Shadow Stack
+==================================
+
+Shadow Stack Size
+-----------------
+
+A task's shadow stack is allocated from memory to a fixed size of
+MIN(RLIMIT_STACK, 4 GB). In other words, the shadow stack is allocated to
+the maximum size of the normal stack, but capped to 4 GB. In the case
+of the clone3 syscall, there is a stack size passed in and shadow stack
+uses this instead of the rlimit.
+
+Signal
+------
+
+The main program and its signal handlers use the same shadow stack. Because
+the shadow stack stores only return addresses, a large shadow stack covers
+the condition that both the program stack and the signal alternate stack run
+out.
+
+When a signal happens, the old pre-signal state is pushed on the stack. When
+shadow stack is enabled, the shadow stack specific state is pushed onto the
+shadow stack. Today this is only the old SSP (shadow stack pointer), pushed
+in a special format with bit 63 set. On sigreturn this old SSP token is
+verified and restored by the kernel. The kernel will also push the normal
+restorer address to the shadow stack to help userspace avoid a shadow stack
+violation on the sigreturn path that goes through the restorer.
+
+So the shadow stack signal frame format is as follows::
+
+ |1...old SSP| - Pointer to old pre-signal ssp in sigframe token format
+ (bit 63 set to 1)
+ | ...| - Other state may be added in the future
+
+
+32 bit ABI signals are not supported in shadow stack processes. Linux prevents
+32 bit execution while shadow stack is enabled by the allocating shadow stacks
+outside of the 32 bit address space. When execution enters 32 bit mode, either
+via far call or returning to userspace, a #GP is generated by the hardware
+which, will be delivered to the process as a segfault. When transitioning to
+userspace the register's state will be as if the userspace ip being returned to
+caused the segfault.
+
+Fork
+----
+
+The shadow stack's vma has VM_SHADOW_STACK flag set; its PTEs are required
+to be read-only and dirty. When a shadow stack PTE is not RO and dirty, a
+shadow access triggers a page fault with the shadow stack access bit set
+in the page fault error code.
+
+When a task forks a child, its shadow stack PTEs are copied and both the
+parent's and the child's shadow stack PTEs are cleared of the dirty bit.
+Upon the next shadow stack access, the resulting shadow stack page fault
+is handled by page copy/re-use.
+
+When a pthread child is created, the kernel allocates a new shadow stack
+for the new thread. New shadow stack creation behaves like mmap() with respect
+to ASLR behavior. Similarly, on thread exit the thread's shadow stack is
+disabled.
+
+Exec
+----
+
+On exec, shadow stack features are disabled by the kernel. At which point,
+userspace can choose to re-enable, or lock them.