[mm-unstable,v2,4/6] mm/mglru: rework type selection

Commit Message

Yu Zhao Dec. 6, 2024, 12:31 a.m. UTC

With anon and file min_seq being able to move independently, rework
type selection so that it is based on the total refaults from all
tiers of each type. Also allow a type to be selected until that type
reaches MIN_NR_GENS, and therefore abs_diff(min_seq[0],min_seq[1]) now
can be 2 (MAX_NR_GENS-MIN_NR_GENS) instead of 1.

Since some tiers of a selected type can have higher refaults than the
first tier of the other type, use a less larger gain factor 2:3
instead of 1:2, in order for those tiers in the selected type to be
better protected.

As an intermediate step to the final optimization, this change by
itself should not have userspace-visiable effects beyond performance.

Reported-by: David Stevens <[e-mail]>
Signed-off-by: Yu Zhao <[e-mail]>
Tested-by: Kalesh Singh <[e-mail]>
---
 mm/vmscan.c | 82 +++++++++++++++++------------------------------------
 1 file changed, 26 insertions(+), 56 deletions(-)

Patch

diff --git a/mm/vmscan.c b/mm/vmscan.c
index 00a5aff3db42..02b01ae2bdbb 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -3089,15 +3089,20 @@  struct ctrl_pos {
 static void read_ctrl_pos(struct lruvec *lruvec, int type, int tier, int gain,
 			  struct ctrl_pos *pos)
 {
+	int i;
 	struct lru_gen_folio *lrugen = &lruvec->lrugen;
 	int hist = lru_hist_from_seq(lrugen->min_seq[type]);
 
-	pos->refaulted = lrugen->avg_refaulted[type][tier] +
-			 atomic_long_read(&lrugen->refaulted[hist][type][tier]);
-	pos->total = lrugen->avg_total[type][tier] +
-		     lrugen->protected[hist][type][tier] +
-		     atomic_long_read(&lrugen->evicted[hist][type][tier]);
 	pos->gain = gain;
+	pos->refaulted = pos->total = 0;
+
+	for (i = tier % MAX_NR_TIERS; i <= min(tier, MAX_NR_TIERS - 1); i++) {
+		pos->refaulted += lrugen->avg_refaulted[type][i] +
+				  atomic_long_read(&lrugen->refaulted[hist][type][i]);
+		pos->total += lrugen->avg_total[type][i] +
+			      lrugen->protected[hist][type][i] +
+			      atomic_long_read(&lrugen->evicted[hist][type][i]);
+	}
 }
 
 static void reset_ctrl_pos(struct lruvec *lruvec, int type, bool carryover)
@@ -4480,13 +4485,13 @@  static int get_tier_idx(struct lruvec *lruvec, int type)
 	struct ctrl_pos sp, pv;
 
 	/*
-	 * To leave a margin for fluctuations, use a larger gain factor (1:2).
+	 * To leave a margin for fluctuations, use a larger gain factor (2:3).
 	 * This value is chosen because any other tier would have at least twice
 	 * as many refaults as the first tier.
 	 */
-	read_ctrl_pos(lruvec, type, 0, 1, &sp);
+	read_ctrl_pos(lruvec, type, 0, 2, &sp);
 	for (tier = 1; tier < MAX_NR_TIERS; tier++) {
-		read_ctrl_pos(lruvec, type, tier, 2, &pv);
+		read_ctrl_pos(lruvec, type, tier, 3, &pv);
 		if (!positive_ctrl_err(&sp, &pv))
 			break;
 	}
@@ -4494,68 +4499,34 @@  static int get_tier_idx(struct lruvec *lruvec, int type)
 	return tier - 1;
 }
 
-static int get_type_to_scan(struct lruvec *lruvec, int swappiness, int *tier_idx)
+static int get_type_to_scan(struct lruvec *lruvec, int swappiness)
 {
-	int type, tier;
 	struct ctrl_pos sp, pv;
-	int gain[ANON_AND_FILE] = { swappiness, MAX_SWAPPINESS - swappiness };
 
+	if (!swappiness)
+		return LRU_GEN_FILE;
+
+	if (swappiness == MAX_SWAPPINESS)
+		return LRU_GEN_ANON;
 	/*
-	 * Compare the first tier of anon with that of file to determine which
-	 * type to scan. Also need to compare other tiers of the selected type
-	 * with the first tier of the other type to determine the last tier (of
-	 * the selected type) to evict.
+	 * Compare the sum of all tiers of anon with that of file to determine
+	 * which type to scan.
 	 */
-	read_ctrl_pos(lruvec, LRU_GEN_ANON, 0, gain[LRU_GEN_ANON], &sp);
-	read_ctrl_pos(lruvec, LRU_GEN_FILE, 0, gain[LRU_GEN_FILE], &pv);
-	type = positive_ctrl_err(&sp, &pv);
+	read_ctrl_pos(lruvec, LRU_GEN_ANON, MAX_NR_TIERS, swappiness, &sp);
+	read_ctrl_pos(lruvec, LRU_GEN_FILE, MAX_NR_TIERS, MAX_SWAPPINESS - swappiness, &pv);
 
-	read_ctrl_pos(lruvec, !type, 0, gain[!type], &sp);
-	for (tier = 1; tier < MAX_NR_TIERS; tier++) {
-		read_ctrl_pos(lruvec, type, tier, gain[type], &pv);
-		if (!positive_ctrl_err(&sp, &pv))
-			break;
-	}
-
-	*tier_idx = tier - 1;
-
-	return type;
+	return positive_ctrl_err(&sp, &pv);
 }
 
 static int isolate_folios(struct lruvec *lruvec, struct scan_control *sc, int swappiness,
 			  int *type_scanned, struct list_head *list)
 {
 	int i;
-	int type;
-	int tier = -1;
-	DEFINE_MIN_SEQ(lruvec);
-
-	/*
-	 * Try to make the obvious choice first, and if anon and file are both
-	 * available from the same generation,
-	 * 1. Interpret swappiness 1 as file first and MAX_SWAPPINESS as anon
-	 *    first.
-	 * 2. If !__GFP_IO, file first since clean pagecache is more likely to
-	 *    exist than clean swapcache.
-	 */
-	if (!swappiness)
-		type = LRU_GEN_FILE;
-	else if (min_seq[LRU_GEN_ANON] < min_seq[LRU_GEN_FILE])
-		type = LRU_GEN_ANON;
-	else if (swappiness == 1)
-		type = LRU_GEN_FILE;
-	else if (swappiness == MAX_SWAPPINESS)
-		type = LRU_GEN_ANON;
-	else if (!(sc->gfp_mask & __GFP_IO))
-		type = LRU_GEN_FILE;
-	else
-		type = get_type_to_scan(lruvec, swappiness, &tier);
+	int type = get_type_to_scan(lruvec, swappiness);
 
 	for_each_evictable_type(i, swappiness) {
 		int scanned;
-
-		if (tier < 0)
-			tier = get_tier_idx(lruvec, type);
+		int tier = get_tier_idx(lruvec, type);
 
 		*type_scanned = type;
 
@@ -4564,7 +4535,6 @@  static int isolate_folios(struct lruvec *lruvec, struct scan_control *sc, int sw
 			return scanned;
 
 		type = !type;
-		tier = -1;
 	}
 
 	return 0;