@@ -313,6 +313,10 @@ sufficient for the given purpose, it shouldn't be unnecessarily further
lowered. It is recommended to be set proportional to ``aggregation interval``.
By default, the ratio is set as ``1/20``, and it is still recommended.
+Based on the manual tuning guide, DAMON provides more intuitive knob-based
+intervals auto tuning mechanism. Please refer to :ref:`the design document of
+the feature <damon_design_monitoring_intervals_autotuning>` for detail.
+
Refer to below documents for an example tuning based on the above guide.
.. toctree::
@@ -321,6 +325,48 @@ Refer to below documents for an example tuning based on the above guide.
monitoring_intervals_tuning_example
+.. _damon_design_monitoring_intervals_autotuning:
+
+Monitoring Intervals Auto-tuning
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+DAMON provides automatic tuning of the ``sampling interval`` and ``aggregation
+interval`` based on the :ref:`the tuning guide idea
+<damon_design_monitoring_params_tuning_guide>`. The tuning mechanism allows
+users to set the aimed amount of access events to observe via DAMON within
+given time interval. The target can be specified by the user as a ratio of
+DAMON-observed access events to the theoretical maximum amount of the events
+(``access_bp``) that measured within a given number of aggregations
+(``aggrs``).
+
+The DAMON-observed access events are calculated in byte granularity based on
+DAMON :ref:`region assumption <damon_design_region_based_sample>`. For
+example, if a region of size ``X`` bytes of ``Y`` ``nr_accesses`` is found, it
+means ``X * Y`` access events are observed by DAMON. Theoretical maximum
+access events for the region is calculated in same way, but replacing ``Y``
+with theoretical maximum ``nr_accesses``, which can be calculated as
+``aggregation interval / sampling interval``.
+
+The mechanism calculates the ratio of access events for ``aggrs`` aggregations,
+and increases or decrease the ``sampleing interval`` and ``aggregation
+interval`` in same ratio, if the observed access ratio is lower or higher than
+the target, respectively. The ratio of the intervals change is decided in
+proportion to the distance between current samples ratio and the target ratio.
+
+The user can further set the minimum and maximum ``sampling interval`` that can
+be set by the tuning mechanism using two parameters (``min_sample_us`` and
+``max_sample_us``). Because the tuning mechanism changes ``sampling interval``
+and ``aggregation interval`` in same ratio always, the minimum and maximum
+``aggregation interval`` after each of the tuning changes can automatically set
+together.
+
+The tuning is turned off by default, and need to be set explicitly by the user.
+As a rule of thumbs and the Parreto principle, 4% access samples ratio target
+is recommended. Note that Parreto principle (80/20 rule) has applied twice.
+That is, assumes 4% (20% of 20%) DAMON-observed access events ratio (source)
+to capture 64% (80% multipled by 80%) real access events (outcomes).
+
+
.. _damon_design_damos:
Operation Schemes
Document the design of DAMON sampling and aggregation intervals auto-tuning. Signed-off-by: SeongJae Park <sj@kernel.org> --- Documentation/mm/damon/design.rst | 46 +++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+)