[0/6] Add uSD and eMMC to iwg23s

Message

Fabrizio Castro Oct. 3, 2018, 11:05 a.m. UTC

Dear All,

this series includes all that is necessary for uSD and
eMMC to work on the iwg23s board, powered by the RZ/G1C
(a.k.a. r8a77470).

This work applies on top of next-20181002

Thanks,
Fab

Fabrizio Castro (6):
  dt-bindings: mmc: renesas_sdhi: Add r8a77470 support
  pinctrl: sh-pfc: r8a77470: Add SDHI support
  mmc: renesas_sdhi: Add r8a77470 SDHI1 support
  ARM: dts: r8a77470: Add SDHI0 support
  ARM: dts: r8a77470: Add SDHI1 support
  ARM: dts: iwg23s-sbc: Add uSD and eMMC support

 Documentation/devicetree/bindings/mmc/tmio_mmc.txt |   6 +-
 arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts          |  76 ++++++++++
 arch/arm/boot/dts/r8a77470.dtsi                    |  28 +++-
 drivers/mmc/host/Kconfig                           |   4 +-
 drivers/mmc/host/renesas_sdhi_internal_dmac.c      |   6 +-
 drivers/pinctrl/sh-pfc/pfc-r8a77470.c              | 162 ++++++++++++++++++++-
 6 files changed, 273 insertions(+), 9 deletions(-)