| Message ID | 20201204171626.10935-1-mw@semihalf.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | sdhci-xenon ACPI support | expand |
On Fri, 4 Dec 2020 at 18:17, Marcin Wojtas <mw@semihalf.com> wrote: > > Hi, > > The fourth version of the sdhci-xenon ACPI support > addresses a comment regarding clk handling in xenon_runtime_resume. > > The MacchiatoBin firmware for testing can be obtained from: > https://drive.google.com/file/d/1Y8BhyaCrksQgT_GPfpqqiYHpQ41kP8Kp > > Changelog: > v3->v4 > * [3/4] Call clk_prepare_enable unconditionally in xenon_runtime_resume. > * Add Adrian's Acked-by to all patches. > > v2->v3 > * [3/4] Call clk_disable_unprepare unconditionally. > * Add Adrian's Acked-by to all patches. > > v1->v2 > * Split single commit to 4 > * Use device_match_data and dedicated ACPI ID's per controller > variant > > Marcin Wojtas (4): > mmc: sdhci-xenon: use match data for controllers variants > mmc: sdhci-xenon: switch to device_* API > mmc: sdhci-xenon: use clk only with DT > mmc: sdhci-xenon: introduce ACPI support > > drivers/mmc/host/sdhci-xenon.h | 12 ++- > drivers/mmc/host/sdhci-xenon-phy.c | 40 +++++---- > drivers/mmc/host/sdhci-xenon.c | 91 +++++++++++++------- > 3 files changed, 91 insertions(+), 52 deletions(-) > Applied for next, thanks! Kind regards Uffe
pt., 11 gru 2020 o 14:47 Ulf Hansson <ulf.hansson@linaro.org> napisał(a): > > On Fri, 4 Dec 2020 at 18:17, Marcin Wojtas <mw@semihalf.com> wrote: > > > > Hi, > > > > The fourth version of the sdhci-xenon ACPI support > > addresses a comment regarding clk handling in xenon_runtime_resume. > > > > The MacchiatoBin firmware for testing can be obtained from: > > https://drive.google.com/file/d/1Y8BhyaCrksQgT_GPfpqqiYHpQ41kP8Kp > > > > Changelog: > > v3->v4 > > * [3/4] Call clk_prepare_enable unconditionally in xenon_runtime_resume. > > * Add Adrian's Acked-by to all patches. > > > > v2->v3 > > * [3/4] Call clk_disable_unprepare unconditionally. > > * Add Adrian's Acked-by to all patches. > > > > v1->v2 > > * Split single commit to 4 > > * Use device_match_data and dedicated ACPI ID's per controller > > variant > > > > Marcin Wojtas (4): > > mmc: sdhci-xenon: use match data for controllers variants > > mmc: sdhci-xenon: switch to device_* API > > mmc: sdhci-xenon: use clk only with DT > > mmc: sdhci-xenon: introduce ACPI support > > > > drivers/mmc/host/sdhci-xenon.h | 12 ++- > > drivers/mmc/host/sdhci-xenon-phy.c | 40 +++++---- > > drivers/mmc/host/sdhci-xenon.c | 91 +++++++++++++------- > > 3 files changed, 91 insertions(+), 52 deletions(-) > > > > Applied for next, thanks! > Thanks a lot! Best regards, Marcin
Hi, The fourth version of the sdhci-xenon ACPI support addresses a comment regarding clk handling in xenon_runtime_resume. The MacchiatoBin firmware for testing can be obtained from: https://drive.google.com/file/d/1Y8BhyaCrksQgT_GPfpqqiYHpQ41kP8Kp Changelog: v3->v4 * [3/4] Call clk_prepare_enable unconditionally in xenon_runtime_resume. * Add Adrian's Acked-by to all patches. v2->v3 * [3/4] Call clk_disable_unprepare unconditionally. * Add Adrian's Acked-by to all patches. v1->v2 * Split single commit to 4 * Use device_match_data and dedicated ACPI ID's per controller variant Marcin Wojtas (4): mmc: sdhci-xenon: use match data for controllers variants mmc: sdhci-xenon: switch to device_* API mmc: sdhci-xenon: use clk only with DT mmc: sdhci-xenon: introduce ACPI support drivers/mmc/host/sdhci-xenon.h | 12 ++- drivers/mmc/host/sdhci-xenon-phy.c | 40 +++++---- drivers/mmc/host/sdhci-xenon.c | 91 +++++++++++++------- 3 files changed, 91 insertions(+), 52 deletions(-)