| Message ID | 20210820092803.78523-1-claudiu.beznea@microchip.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | mmc: pwrseq: sd8787: add support wilc1000 devices | expand |
On Fri, 20 Aug 2021 at 11:30, Claudiu Beznea <claudiu.beznea@microchip.com> wrote: > > Hi, > > This series adds support for WILC1000 devices on pwrseq-sd8787 driver. > WILC1000 devices needs a minimum delay of 5ms b/w reset and power lines. > Adapt the sd8787 driver for this by adding a new compatible for WILC1000 > devices and specify the delay on .data field of struct of_device_id. > > Thank you, > Claudiu Beznea > > Changes in v3: > - fixed dt binding compilation > > Changes in v2: > - changed cover letter title (it was: mmc: pwrseq: sd8787: add support > for selectable) > - use new compatible in pwrseq-sd8787 driver instead of adding a new > binding for specifying the delay; with this, the patch 1/1 from v1 is > not necessary > - adapt patch 3/3 from this version with the new compatible > > > Claudiu Beznea (3): > dt-bindings: pwrseq-sd8787: add binding for wilc1000 > mmc: pwrseq: sd8787: add support for wilc1000 > mmc: pwrseq: add wilc1000_sdio dependency for pwrseq_sd8787 > > Eugen Hristev (1): > ARM: dts: at91: sama5d27_wlsom1: add wifi device > > .../bindings/mmc/mmc-pwrseq-sd8787.yaml | 4 +- > arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi | 71 +++++++++++++++++++ > drivers/mmc/core/Kconfig | 2 +- > drivers/mmc/core/pwrseq_sd8787.c | 11 ++- > 4 files changed, 84 insertions(+), 4 deletions(-) > Applied patch1 -> patch3, thanks! I leave patch 4 for soc maintainers. Kind regards Uffe
On 24/08/2021 at 16:56, Ulf Hansson wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > On Fri, 20 Aug 2021 at 11:30, Claudiu Beznea > <claudiu.beznea@microchip.com> wrote: >> >> Hi, >> >> This series adds support for WILC1000 devices on pwrseq-sd8787 driver. >> WILC1000 devices needs a minimum delay of 5ms b/w reset and power lines. >> Adapt the sd8787 driver for this by adding a new compatible for WILC1000 >> devices and specify the delay on .data field of struct of_device_id. >> >> Thank you, >> Claudiu Beznea >> >> Changes in v3: >> - fixed dt binding compilation >> >> Changes in v2: >> - changed cover letter title (it was: mmc: pwrseq: sd8787: add support >> for selectable) >> - use new compatible in pwrseq-sd8787 driver instead of adding a new >> binding for specifying the delay; with this, the patch 1/1 from v1 is >> not necessary >> - adapt patch 3/3 from this version with the new compatible >> >> >> Claudiu Beznea (3): >> dt-bindings: pwrseq-sd8787: add binding for wilc1000 >> mmc: pwrseq: sd8787: add support for wilc1000 >> mmc: pwrseq: add wilc1000_sdio dependency for pwrseq_sd8787 >> >> Eugen Hristev (1): >> ARM: dts: at91: sama5d27_wlsom1: add wifi device >> >> .../bindings/mmc/mmc-pwrseq-sd8787.yaml | 4 +- >> arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi | 71 +++++++++++++++++++ >> drivers/mmc/core/Kconfig | 2 +- >> drivers/mmc/core/pwrseq_sd8787.c | 11 ++- >> 4 files changed, 84 insertions(+), 4 deletions(-) >> > > Applied patch1 -> patch3, thanks! I leave patch 4 for soc maintainers. Perfect, we take care of patch 4 through at91 -> arm-soc trees for 5.16 kernel timeframe. Best regards, Nicolas