mbox series

[v2,0/3] arm64: dts: qcom: x1e80100: Describe SDCs and enable support on QCP

Message ID 20241014-x1e80100-qcp-sdhc-v2-0-868e70a825e0@linaro.org (mailing list archive)
Headers show
Series arm64: dts: qcom: x1e80100: Describe SDCs and enable support on QCP | expand

Message

Abel Vesa Oct. 14, 2024, 8:19 a.m. UTC 
The X1E80100 has two SDHC controllers (called SDC2 and SDC4).
Describe both of them and enable the SDC2 on QCP. This brings
SD card support for the microSD port on QCP.

The SDC4 is described but there is no device outthere yet that makes
use of it, AFAIK.

Didn't include the SDC4 pins yet because there are some bindings
errors that need to be addressed, and since there is no HW that
actually uses it, we can describe them at a later stage.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
Changes in v2:
- rebased on next-20241011
- dropped the bindings schema update patch
- dropped the sdhci-caps-mask properties from both
  controllers as SDR104/SDR50 are actually supported
- Link to v1: https://lore.kernel.org/r/20241008-x1e80100-qcp-sdhc-v1-0-dfef4c92ae31@linaro.org

---
Abel Vesa (3):
      arm64: dts: qcom: x1e80100: Describe the SDHC controllers
      arm64: dts: qcom: x1e80100: Describe TLMM pins for SDC2
      arm64: dts: qcom: x1e80100-qcp: Enable SD card support

 arch/arm64/boot/dts/qcom/x1e80100-qcp.dts |  20 +++++
 arch/arm64/boot/dts/qcom/x1e80100.dtsi    | 142 ++++++++++++++++++++++++++++++
 2 files changed, 162 insertions(+)
---
base-commit: d61a00525464bfc5fe92c6ad713350988e492b88
change-id: 20241007-x1e80100-qcp-sdhc-15c716dad946

Best regards,