Show patches with: Submitter = Doug Anderson       |    State = Action Required       |   226 patches
« 1 2 3 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v2,2/4] mmc: read mmc alias from device tree - - - --- 2016-04-29 Doug Anderson New
[v2,1/4] Documentation: mmc: Document mmc aliases - - - --- 2016-04-29 Doug Anderson New
[3/3] mmc: use SD/MMC host ID for block device name ID - - - --- 2016-04-28 Doug Anderson New
[2/3] mmc: read mmc alias from device tree - - - --- 2016-04-28 Doug Anderson New
[1/3] Documentation: mmc: Document mmc aliases - - - --- 2016-04-28 Doug Anderson New
mmc: dw_mmc: Wait for data transfer after response errors - - - --- 2015-05-18 Doug Anderson New
RFC: mmc: core: Increase delay for voltage to stabilize from 3.3V to 1.8V - - - --- 2015-05-12 Doug Anderson New
[3/3] mmc: dw_mmc: Add locking around cmd11 timer - - - --- 2015-04-03 Doug Anderson New
[2/3] mmc: dw_mmc: Add a return in an unexpected cmd11 timeout - - - --- 2015-04-03 Doug Anderson New
[1/3] mmc: dw_mmc: Increase cmd11 timeout to 500ms - - - --- 2015-04-03 Doug Anderson New
mmc: dw_mmc: Don't send clock off command if power is off - - - --- 2015-03-20 Doug Anderson New
[v4,3/4] mmc: dw_mmc: Use mmc_regulator_set_vqmmc in start_signal_voltage_switch - - - --- 2015-03-11 Doug Anderson New
[v4,2/4] mmc: core: Add mmc_regulator_set_vqmmc() - - - --- 2015-03-11 Doug Anderson New
[v4,1/4] mmc: dw_mmc: Don't try to enable the CD until we're sure we're not deferring - - - --- 2015-03-11 Doug Anderson New
mmc: dw_mmc: Consider HLE errors to be data and command errors - - - --- 2015-03-10 Doug Anderson New
mmc: dw_mmc: Add a timeout for sending CMD11 - - - --- 2015-03-09 Doug Anderson New
[2/2] mmc: dw_mmc: Don't crash if we get an interrupt before slot has initted - - - --- 2015-02-25 Doug Anderson New
[1/2] mmc: dw_mmc: Only enable CD after setup and only if needed - - - --- 2015-02-25 Doug Anderson New
[v2] mmc: dw_mmc: Don't start commands while busy - - - --- 2015-02-20 Doug Anderson New
[2/2] mmc: dw_mmc: Give a good reset after we give power - - - --- 2015-02-20 Doug Anderson New
[1/2] mmc: dw_mmc: Make sure we only adjust the clock when power is on - - - --- 2015-02-20 Doug Anderson New
mmc: dw_mmc: Don't start commands while busy - - - --- 2015-02-20 Doug Anderson New
mmc: dw_mmc: Power on vqmmc in MMC_POWER_ON, not MMC_POWER_UP - - - --- 2015-01-13 Doug Anderson New
mmc: dw_mmc: rockchip: Add DW_MCI_QUIRK_RETRY_DELAY - - - --- 2015-01-13 Doug Anderson New
[v3,2/3] mmc: dw_mmc: Use mmc_regulator_set_vqmmc in start_signal_voltage_switch - - - --- 2014-12-16 Doug Anderson New
[v3,1/3] mmc: core: Add mmc_regulator_set_vqmmc() - - - --- 2014-12-16 Doug Anderson New
[v2,2/3] mmc: dw_mmc: Use mmc_regulator_set_vqmmc in start_signal_voltage_switch - - - --- 2014-12-15 Doug Anderson New
[v2,1/3] mmc: core: Add mmc_regulator_set_vqmmc() - - - --- 2014-12-15 Doug Anderson New
[3/4] mmc: dw_mmc: Use mmc_regulator_set_vqmmc in start_signal_voltage_switch - - - --- 2014-12-10 Doug Anderson New
[2/4] mmc: core: Add mmc_regulator_set_vqmmc() - - - --- 2014-12-10 Doug Anderson New
[v5,4/4] mmc: dw_mmc: Protect read-modify-write of INTMASK with a lock - - - --- 2014-12-02 Doug Anderson New
[v5,3/4] mmc: dw_mmc: Cleanup disable of low power mode w/ SDIO interrupts - - - --- 2014-12-02 Doug Anderson New
[v5,2/4] mmc: core: Support the optional init_card() callback for MMC and SD - - - --- 2014-12-02 Doug Anderson New
[v4,3/3] mmc: dw_mmc: Protect read-modify-write of INTMASK with a lock - - - --- 2014-12-02 Doug Anderson New
[v4,2/3] mmc: dw_mmc: Cleanup disable of low power mode w/ SDIO interrupts - - - --- 2014-12-02 Doug Anderson New
[v4,1/3] mmc: core: Support the optional init_card() callback for MMC and SD - - - --- 2014-12-02 Doug Anderson New
[v2] mmc: dw_mmc: Turn the card clock off at suspend time - - - --- 2014-11-19 Doug Anderson New
mmc: dw_mmc: Turn the card clock off at suspend time - - - --- 2014-11-19 Doug Anderson New
mmc: dw_mmc: rockchip: Don't recalc the clock when it goes off - - - --- 2014-10-14 Doug Anderson New
mmc: dw_mmc: Remove old card detect infrastructure - - - --- 2014-10-14 Doug Anderson New
mmc: dw_mmc: Change signal voltage error to dev_dbg() - - - --- 2014-10-11 Doug Anderson New
mmc: dw_mmc: Reset DMA before enabling IDMAC - - - --- 2014-10-10 Doug Anderson New
[v2] ARM: dts: Add mshc aliases for rk3288 - - - --- 2014-09-03 Doug Anderson New
mmc: dw_mmc: Don't enable interrupts until we're ready - - - --- 2014-09-02 Doug Anderson New
mmc: dw_mmc: Pass back errors from mmc_of_parse() - - - --- 2014-08-25 Doug Anderson New
ARM: dts: Add mmc0 and mmc1 aliases for rk3288 - - - --- 2014-08-14 Doug Anderson New
[REPOST,v2] mmc: dw_mmc: Make sure we don't get stuck when we get an error - - - --- 2014-08-13 Doug Anderson New
[v4,2/2] ARM: dts: Enable emmc and sdmmc on the rk3288-evb boards - - - --- 2014-08-12 Doug Anderson New
[v4,1/2] ARM: dts: Add emmc and sdmmc to the rk3288 device tree - - - --- 2014-08-12 Doug Anderson New
[v3,4/4] ARM: dts: mmc slot node gone on rk3288 => no more address / size cells - - - --- 2014-08-06 Doug Anderson New
[v3,3/4] ARM: dts: Take the mmc slot node out of rk3288-evb - - - --- 2014-08-06 Doug Anderson New
[v3,2/4] ARM: dts: Enable emmc and sdmmc on the rk3288-evb boards - - - --- 2014-08-06 Doug Anderson New
[v3,1/4] ARM: dts: Add emmc and sdmmc to the rk3288 device tree - - - --- 2014-08-06 Doug Anderson New
[v2,4/4] ARM: dts: mmc slot node gone on rk3288 => no more address / size cells - - - --- 2014-07-31 Doug Anderson New
[v2,3/4] ARM: dts: Take the mmc slot node out of rk3288-evb - - - --- 2014-07-31 Doug Anderson New
[v2,2/4] ARM: dts: Enable emmc and sdmmc on the rk3288-evb boards - - - --- 2014-07-31 Doug Anderson New
[v2,1/4] ARM: dts: Add emmc and sdmmc to the rk3288 device tree - - - --- 2014-07-31 Doug Anderson New
[5/5] ARM: dts: mmc slot node gone on rk3288 => no more address / size cells - - - --- 2014-07-29 Doug Anderson New
[4/5] ARM: dts: Take the mmc slot node out of rk3288-evb - - - --- 2014-07-29 Doug Anderson New
[3/5] ARM: dts: Enable DDR50 mode on the eMMC - - - --- 2014-07-29 Doug Anderson New
[2/5] ARM: dts: Enable emmc and sdmmc on the rk3288-evb boards - - - --- 2014-07-29 Doug Anderson New
[1/5] ARM: dts: Add emmc and sdmmc to the rk3288 device tree - - - --- 2014-07-29 Doug Anderson New
[v2] mmc: dw_mmc: add support for RK3288 - - - --- 2014-07-29 Doug Anderson New
[v2] mmc: dw_mmc: Make sure we don't get stuck when we get an error - - - --- 2014-05-20 Doug Anderson New
mmc: dw_mmc: Don't print data errors - - - --- 2014-04-22 Doug Anderson New
[v3,3/3] mmc: dw_mmc: Protect read-modify-write of INTMASK with a lock - - - --- 2013-10-18 Doug Anderson New
[v3,2/3] mmc: dw_mmc: Cleanup disable of low power mode w/ SDIO interrupts - - - --- 2013-10-18 Doug Anderson New
[v3,1/3] mmc: core: Support the optional init_card() callback for MMC and SD - - - --- 2013-10-18 Doug Anderson New
[2/2] mmc: dw_mmc: Protect read-modify-write of INTMASK with a lock - - - --- 2013-10-15 Doug Anderson New
[1/2] mmc: dw_mmc: Cleanup disable of low power mode w/ SDIO interrupts - - - --- 2013-10-15 Doug Anderson New
[v7,3/3] mmc: dw_mmc: Set timeout to max upon resume - - - --- 2013-08-29 Doug Anderson New
[v7,2/3] mmc: dw_mmc: Honor requests to set the clock to 0 (turn off clock) - - - --- 2013-08-29 Doug Anderson New
[v7,1/3] mmc: dw_mmc: Add exynos resume_noirq callback to clear WAKEUP_INT - - - --- 2013-08-29 Doug Anderson New
[v6,3/3] mmc: dw_mmc: Set timeout to max upon resume - - - --- 2013-08-22 Doug Anderson New
[v6,2/3] mmc: dw_mmc: Honor requests to set the clock to 0 (turn off clock) - - - --- 2013-08-22 Doug Anderson New
[v6,1/3] mmc: dw_mmc: Add exynos resume_noirq callback to clear WAKEUP_INT - - - --- 2013-08-22 Doug Anderson New
[v5,4/4] mmc: dw_mmc: Set timeout to max upon resume - - - --- 2013-08-09 Doug Anderson New
[v5,3/4] mmc: dw_mmc: Always setup the bus after suspend/resume - - - --- 2013-08-09 Doug Anderson New
[v5,2/4] mmc: dw_mmc: Add exynos resume_noirq callback to clear WAKEUP_INT - - - --- 2013-08-09 Doug Anderson New
[v5,1/4] mmc: dw_mmc: Invalidate cache of current_speed after suspend/resume - - - --- 2013-08-09 Doug Anderson New
[v4,4/4] mmc: dw_mmc: Set timeout to max upon resume - - - --- 2013-08-06 Doug Anderson New
[v4,3/4] mmc: dw_mmc: Always setup the bus after suspend/resume - - - --- 2013-08-06 Doug Anderson New
[v4,2/4] mmc: dw_mmc: Add exynos resume_noirq callback to clear WAKEUP_INT - - - --- 2013-08-06 Doug Anderson New
[v4,1/4] mmc: dw_mmc: Invalidate cache of current_speed after suspend/resume - - - --- 2013-08-06 Doug Anderson New
[v3,5/5] mmc: dw_mmc: Set timeout to max upon resume - - - --- 2013-07-10 Doug Anderson New
[v3,4/5] mmc: dw_mmc: Always setup the bus after suspend/resume - - - --- 2013-07-10 Doug Anderson New
[v3,3/5] mmc: dw_mmc: Add exynos resume_noirq callback to clear WAKEUP_INT - - - --- 2013-07-10 Doug Anderson New
[v3,2/5] mmc: dw_mmc: Add suspend_noirq/resume_noirq callbacks for dw_mmc-pltfm - - - --- 2013-07-10 Doug Anderson New
[v3,1/5] mmc: dw_mmc: Invalidate cache of current_speed after suspend/resume - - - --- 2013-07-10 Doug Anderson New
[v2,5/5] mmc: dw_mmc: Set timeout to max upon resume - - - --- 2013-07-09 Doug Anderson New
[v2,4/5] mmc: dw_mmc: Always setup the bus after suspend/resume - - - --- 2013-07-09 Doug Anderson New
[v2,3/5] mmc: dw_mmc: Add exynos resume_noirq callback to clear WAKEUP_INT - - - --- 2013-07-09 Doug Anderson New
[v2,2/5] mmc: dw_mmc: Add suspend_noirq/resume_noirq callbacks for dw_mmc-pltfm - - - --- 2013-07-09 Doug Anderson New
[v2,1/5] mmc: dw_mmc: Invalidate cache of current_speed after suspend/resume - - - --- 2013-07-09 Doug Anderson New
mmc: dw_mmc: Handle DW_MCI_QUIRK_IDMAC_DTO properly - - - --- 2013-07-09 Doug Anderson New
[5/5] mmc: dw_mmc: Set timeout to max upon resume - - - --- 2013-07-09 Doug Anderson New
[4/5] mmc: dw_mmc: Always setup the bus after suspend/resume - - - --- 2013-07-09 Doug Anderson New
[3/5] mmc: dw_mmc: Add exynos resume callback to clear WAKEUP_INT - - - --- 2013-07-09 Doug Anderson New
[2/5] mmc: dw_mmc: Add suspend/resume callbacks; disable irq during suspend - - - --- 2013-07-09 Doug Anderson New
[1/5] mmc: dw_mmc: Invalidate cache of current_speed after suspend/resume - - - --- 2013-07-09 Doug Anderson New
« 1 2 3 »