@@ -243,28 +243,46 @@ static void mmc_select_card_type(struct mmc_card *card)
u8 card_type = card->ext_csd.raw_card_type & EXT_CSD_CARD_TYPE_MASK;
u32 caps = host->caps, caps2 = host->caps2;
unsigned int hs_max_dtr = 0;
+ unsigned int avail_type = 0;
- if (card_type & EXT_CSD_CARD_TYPE_26)
+ if (caps & MMC_CAP_MMC_HIGHSPEED &&
+ card_type & EXT_CSD_CARD_TYPE_HS_26) {
hs_max_dtr = MMC_HIGH_26_MAX_DTR;
+ avail_type |= EXT_CSD_CARD_TYPE_HS_26;
+ }
if (caps & MMC_CAP_MMC_HIGHSPEED &&
- card_type & EXT_CSD_CARD_TYPE_52)
+ card_type & EXT_CSD_CARD_TYPE_HS_52) {
hs_max_dtr = MMC_HIGH_52_MAX_DTR;
+ avail_type |= EXT_CSD_CARD_TYPE_HS_52;
+ }
- if ((caps & MMC_CAP_1_8V_DDR &&
- card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) ||
- (caps & MMC_CAP_1_2V_DDR &&
- card_type & EXT_CSD_CARD_TYPE_DDR_1_2V))
+ if (caps & MMC_CAP_1_8V_DDR &&
+ card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) {
hs_max_dtr = MMC_HIGH_DDR_MAX_DTR;
+ avail_type |= EXT_CSD_CARD_TYPE_DDR_1_8V;
+ }
- if ((caps2 & MMC_CAP2_HS200_1_8V_SDR &&
- card_type & EXT_CSD_CARD_TYPE_SDR_1_8V) ||
- (caps2 & MMC_CAP2_HS200_1_2V_SDR &&
- card_type & EXT_CSD_CARD_TYPE_SDR_1_2V))
+ if (caps & MMC_CAP_1_2V_DDR &&
+ card_type & EXT_CSD_CARD_TYPE_DDR_1_2V) {
+ hs_max_dtr = MMC_HIGH_DDR_MAX_DTR;
+ avail_type |= EXT_CSD_CARD_TYPE_DDR_1_2V;
+ }
+
+ if (caps2 & MMC_CAP2_HS200_1_8V_SDR &&
+ card_type & EXT_CSD_CARD_TYPE_HS200_1_8V) {
hs_max_dtr = MMC_HS200_MAX_DTR;
+ avail_type |= EXT_CSD_CARD_TYPE_HS200_1_8V;
+ }
+
+ if (caps2 & MMC_CAP2_HS200_1_2V_SDR &&
+ card_type & EXT_CSD_CARD_TYPE_HS200_1_2V) {
+ hs_max_dtr = MMC_HS200_MAX_DTR;
+ avail_type |= EXT_CSD_CARD_TYPE_HS200_1_2V;
+ }
card->ext_csd.hs_max_dtr = hs_max_dtr;
- card->ext_csd.card_type = card_type;
+ card->mmc_avail_type = avail_type;
}
/*
@@ -708,6 +726,11 @@ static struct device_type mmc_type = {
.groups = mmc_attr_groups,
};
+static inline unsigned int mmc_snoop_ddr(struct mmc_card *card)
+{
+ return card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_52;
+}
+
/*
* Select the PowerClass for the current bus width
* If power class is defined for 4/8 bit bus in the
@@ -808,12 +831,10 @@ static int mmc_select_hs200(struct mmc_card *card)
host = card->host;
- if (card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_2V &&
- host->caps2 & MMC_CAP2_HS200_1_2V_SDR)
+ if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_2V)
err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
- if (err && card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_8V &&
- host->caps2 & MMC_CAP2_HS200_1_8V_SDR)
+ if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_8V)
err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
/* If fails try again during next card power cycle */
@@ -1070,10 +1091,9 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
*/
if (card->ext_csd.hs_max_dtr != 0) {
err = 0;
- if (card->ext_csd.hs_max_dtr > 52000000 &&
- host->caps2 & MMC_CAP2_HS200)
+ if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200)
err = mmc_select_hs200(card);
- else if (host->caps & MMC_CAP_MMC_HIGHSPEED)
+ else if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS)
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_HS_TIMING, 1,
card->ext_csd.generic_cmd6_time);
@@ -1086,13 +1106,11 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
mmc_hostname(card->host));
err = 0;
} else {
- if (card->ext_csd.hs_max_dtr > 52000000 &&
- host->caps2 & MMC_CAP2_HS200) {
+ if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200)
mmc_set_timing(card->host,
MMC_TIMING_MMC_HS200);
- } else {
+ else
mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
- }
}
}
@@ -1115,14 +1133,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
/*
* Indicate DDR mode (if supported).
*/
- if (mmc_card_hs(card)) {
- if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_8V)
- && (host->caps & MMC_CAP_1_8V_DDR))
- ddr = MMC_1_8V_DDR_MODE;
- else if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_2V)
- && (host->caps & MMC_CAP_1_2V_DDR))
- ddr = MMC_1_2V_DDR_MODE;
- }
+ if (mmc_card_hs(card))
+ ddr = mmc_snoop_ddr(card);
/*
* Indicate HS200 SDR mode (if supported).
@@ -1142,8 +1154,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
* 3. set the clock to > 52Mhz <=200MHz and
* 4. execute tuning for HS200
*/
- if ((host->caps2 & MMC_CAP2_HS200) &&
- card->host->ops->execute_tuning) {
+ if (card->host->ops->execute_tuning) {
mmc_host_clk_hold(card->host);
err = card->host->ops->execute_tuning(card->host,
MMC_SEND_TUNING_BLOCK_HS200);
@@ -1252,7 +1263,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
*
* WARNING: eMMC rules are NOT the same as SD DDR
*/
- if (ddr == MMC_1_2V_DDR_MODE) {
+ if (ddr & EXT_CSD_CARD_TYPE_DDR_1_2V) {
err = __mmc_set_signal_voltage(host,
MMC_SIGNAL_VOLTAGE_120);
if (err)
@@ -68,7 +68,6 @@ struct mmc_ext_csd {
#define MMC_HIGH_DDR_MAX_DTR 52000000
#define MMC_HS200_MAX_DTR 200000000
unsigned int sectors;
- unsigned int card_type;
unsigned int hc_erase_size; /* In sectors */
unsigned int hc_erase_timeout; /* In milliseconds */
unsigned int sec_trim_mult; /* Secure trim multiplier */
@@ -297,7 +296,10 @@ struct mmc_card {
const char **info; /* info strings */
struct sdio_func_tuple *tuples; /* unknown common tuples */
- unsigned int sd_bus_speed; /* Bus Speed Mode set for the card */
+ union {
+ unsigned int sd_bus_speed; /* Bus Speed Mode set for the card */
+ unsigned int mmc_avail_type; /* supported device type by both host and card */
+ };
struct dentry *debugfs_root;
struct mmc_part part[MMC_NUM_PHY_PARTITION]; /* physical partitions */
@@ -62,12 +62,6 @@ struct mmc_ios {
#define MMC_TIMING_MMC_DDR52 8
#define MMC_TIMING_MMC_HS200 9
-#define MMC_SDR_MODE 0
-#define MMC_1_2V_DDR_MODE 1
-#define MMC_1_8V_DDR_MODE 2
-#define MMC_1_2V_SDR_MODE 3
-#define MMC_1_8V_SDR_MODE 4
-
unsigned char signal_voltage; /* signalling voltage (1.8V or 3.3V) */
#define MMC_SIGNAL_VOLTAGE_330 0
@@ -354,18 +354,22 @@ struct _mmc_csd {
#define EXT_CSD_CMD_SET_SECURE (1<<1)
#define EXT_CSD_CMD_SET_CPSECURE (1<<2)
-#define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */
-#define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */
#define EXT_CSD_CARD_TYPE_MASK 0x3F /* Mask out reserved bits */
+#define EXT_CSD_CARD_TYPE_HS_26 (1<<0) /* Card can run at 26MHz */
+#define EXT_CSD_CARD_TYPE_HS_52 (1<<1) /* Card can run at 52MHz */
+#define EXT_CSD_CARD_TYPE_HS (EXT_CSD_CARD_TYPE_HS_26 | \
+ EXT_CSD_CARD_TYPE_HS_52)
#define EXT_CSD_CARD_TYPE_DDR_1_8V (1<<2) /* Card can run at 52MHz */
/* DDR mode @1.8V or 3V I/O */
#define EXT_CSD_CARD_TYPE_DDR_1_2V (1<<3) /* Card can run at 52MHz */
/* DDR mode @1.2V I/O */
#define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \
| EXT_CSD_CARD_TYPE_DDR_1_2V)
-#define EXT_CSD_CARD_TYPE_SDR_1_8V (1<<4) /* Card can run at 200MHz */
-#define EXT_CSD_CARD_TYPE_SDR_1_2V (1<<5) /* Card can run at 200MHz */
+#define EXT_CSD_CARD_TYPE_HS200_1_8V (1<<4) /* Card can run at 200MHz */
+#define EXT_CSD_CARD_TYPE_HS200_1_2V (1<<5) /* Card can run at 200MHz */
/* SDR mode @1.2V I/O */
+#define EXT_CSD_CARD_TYPE_HS200 (EXT_CSD_CARD_TYPE_HS200_1_8V | \
+ EXT_CSD_CARD_TYPE_HS200_1_2V)
#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
Device types which are supported by both host and device can be identified when EXT_CSD is read. There is no need to check host's capability anymore. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> --- drivers/mmc/core/mmc.c | 77 ++++++++++++++++++++++++++------------------- include/linux/mmc/card.h | 6 ++- include/linux/mmc/host.h | 6 --- include/linux/mmc/mmc.h | 12 +++++-- 4 files changed, 56 insertions(+), 45 deletions(-)