@@ -7,6 +7,7 @@
* Wei WANG <wei_wang@realsil.com.cn>
*/
+#include <linux/pci.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/highmem.h>
@@ -947,7 +948,7 @@ static int sd_power_on(struct realtek_pci_sdmmc *host, unsigned char power_mode)
/* send at least 74 clocks */
rtsx_pci_write_register(pcr, SD_BUS_STAT, SD_CLK_TOGGLE_EN, SD_CLK_TOGGLE_EN);
- if (PCI_PID(pcr) == PID_5261) {
+ if ((PCI_PID(pcr) == PID_5261) || (PCI_PID(pcr) == PID_5264)) {
/*
* If test mode is set switch to SD Express mandatorily,
* this is only for factory testing.
@@ -1364,6 +1365,14 @@ static int sdmmc_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
struct realtek_pci_sdmmc *host = mmc_priv(mmc);
struct rtsx_pcr *pcr = host->pcr;
+ if (PCI_PID(pcr) == PID_5264) {
+ pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL2,
+ PCI_EXP_LNKCTL2_TLS, PCI_EXP_LNKCTL2_TLS_2_5GT);
+ pci_write_config_byte(pcr->pci, 0x80e, 0x02);
+ pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL2,
+ PCI_EXP_LNKCTL2_TLS, PCI_EXP_LNKCTL2_TLS_5_0GT);
+ }
+
/* Set relink_time for changing to PCIe card */
relink_time = 0x8FFF;
@@ -1379,6 +1388,12 @@ static int sdmmc_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
if (pcr->ops->disable_auto_blink)
pcr->ops->disable_auto_blink(pcr);
+ if (PCI_PID(pcr) == PID_5264) {
+ rtsx_pci_write_register(pcr, RTS5264_AUTOLOAD_CFG2,
+ RTS5264_CHIP_RST_N_SEL, RTS5264_CHIP_RST_N_SEL);
+ rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x00);
+ }
+
/* For PCIe/NVMe mode can't enter delink issue */
pcr->hw_param.interrupt_en &= ~(SD_INT_EN);
rtsx_pci_writel(pcr, RTSX_BIER, pcr->hw_param.interrupt_en);
add rts5264 register setting when sd express card insert Signed-off-by: Ricky Wu <ricky_wu@realtek.com> --- v3: split up mmc part from v2 patch --- drivers/mmc/host/rtsx_pci_sdmmc.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)