@@ -1055,6 +1055,8 @@ static void mmc_spi_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct mmc_spi_host *host = mmc_priv(mmc);
int status = -EINVAL;
+ int crc_retry = 5;
+ struct mmc_command stop;
#ifdef DEBUG
/* MMC core and layered drivers *MUST* issue SPI-aware commands */
@@ -1087,10 +1089,30 @@ static void mmc_spi_request(struct mmc_host *mmc, struct mmc_request *mrq)
/* request exclusive bus access */
spi_bus_lock(host->spi->master);
+ crc_recover:
/* issue command; then optionally data and stop */
status = mmc_spi_command_send(host, mrq, mrq->cmd, mrq->data != NULL);
if (status == 0 && mrq->data) {
mmc_spi_data_do(host, mrq->cmd, mrq->data, mrq->data->blksz);
+
+ /*
+ * SPI bus is not reliable when doing large data transfer.
+ * If occasional crc error is reported by SD device when do
+ * data read/write over SPI, it can be recovered by doing
+ * last SD command again. The retry count is set to 5 to
+ * ensure the driver pass any stress test.
+ */
+ if (mrq->data->error == -EILSEQ && crc_retry) {
+ stop.opcode = MMC_STOP_TRANSMISSION;
+ stop.arg = 0;
+ stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
+
+ status = mmc_spi_command_send(host, mrq, &stop, 0);
+ crc_retry--;
+ mrq->data->error = 0;
+ goto crc_recover;
+ }
+
if (mrq->stop)
status = mmc_spi_command_send(host, mrq, mrq->stop, 0);
else