mmci: reset voltage after power off.

Commit Message

Linus Walleij Nov. 5, 2010, 9:35 a.m. UTC

None

Patch

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 8f86d70..508ed2b 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -940,6 +940,13 @@  static void mmc_power_off(struct mmc_host *host)
 {
 	host->ios.clock = 0;
 	host->ios.vdd = 0;
+
+	/*
+	 * Reset ocr mask to be the highest possible voltage supported for
+	 * this mmc host. This value will be used at next power up.
+	 */
+	host->ocr = 1 << (fls(host->ocr_avail) - 1);
+
 	if (!mmc_host_is_spi(host)) {
 		host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
 		host->ios.chip_select = MMC_CS_DONTCARE;