@@ -947,6 +947,15 @@ void mmc_set_timing(struct mmc_host *host, unsigned int timing)
}
/*
+ * Select appropriate driver type for host.
+ */
+void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type)
+{
+ host->ios.drv_type = drv_type;
+ mmc_set_ios(host);
+}
+
+/*
* Apply power to the MMC stack. This is a two-stage process.
* First, we enable power to the card without the clock running.
* We then wait a bit for the power to stabilise. Finally,
@@ -42,6 +42,7 @@ void mmc_set_bus_width_ddr(struct mmc_host *host, unsigned int width,
unsigned int ddr);
u32 mmc_select_voltage(struct mmc_host *host, u32 ocr);
void mmc_set_timing(struct mmc_host *host, unsigned int timing);
+void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type);
static inline void mmc_delay(unsigned int ms)
{
@@ -426,6 +426,86 @@ out:
return err;
}
+static int sd_select_driver_type(struct mmc_card *card, u8 *status)
+{
+ int host_set_drv_type, card_set_drv_type;
+ int err;
+
+ /*
+ * If the host doesn't support any of the Driver Types A,C or D,
+ * default Driver Type B is used.
+ */
+ if (!(card->host->caps & (MMC_CAP_DRIVER_TYPE_A | MMC_CAP_DRIVER_TYPE_C
+ | MMC_CAP_DRIVER_TYPE_D)))
+ return 0;
+
+ if (card->host->caps & MMC_CAP_DRIVER_TYPE_A) {
+ host_set_drv_type = MMC_SET_DRIVER_TYPE_A;
+ if (card->sw_caps.uhs_drv_type & SD_DRIVER_TYPE_A)
+ card_set_drv_type = MMC_SET_DRIVER_TYPE_A;
+ else if (card->sw_caps.uhs_drv_type & SD_DRIVER_TYPE_C)
+ card_set_drv_type = MMC_SET_DRIVER_TYPE_C;
+ } else if (card->host->caps & MMC_CAP_DRIVER_TYPE_C) {
+ host_set_drv_type = MMC_SET_DRIVER_TYPE_C;
+ if (card->sw_caps.uhs_drv_type & SD_DRIVER_TYPE_C)
+ card_set_drv_type = MMC_SET_DRIVER_TYPE_C;
+ }
+
+ err = mmc_sd_switch(card, 1, 2, card_set_drv_type, status);
+ if (err)
+ return err;
+
+ if ((status[15] & 0xF) != card_set_drv_type)
+ printk(KERN_WARNING "%s: Problem setting driver strength!\n",
+ mmc_hostname(card->host));
+ else
+ mmc_set_driver_type(card->host, host_set_drv_type);
+
+ return 0;
+}
+
+/*
+ * UHS-I specific initialization procedure
+ */
+static int mmc_sd_init_uhs_card(struct mmc_card *card)
+{
+ int err;
+ u8 *status;
+
+ if (!card->scr.sda_spec3)
+ return 0;
+
+ if (!(card->csd.cmdclass & CCC_SWITCH))
+ return 0;
+
+ err = -EIO;
+
+ status = kmalloc(64, GFP_KERNEL);
+ if (!status) {
+ printk(KERN_ERR "%s: could not allocate a buffer for "
+ "switch capabilities.\n", mmc_hostname(card->host));
+ return -ENOMEM;
+ }
+
+ /* Set 4-bit bus width */
+ if ((card->host->caps & MMC_CAP_4_BIT_DATA) &&
+ (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) {
+ err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4);
+ if (err)
+ goto out;
+
+ mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4);
+ }
+
+ /* Set the driver strength for the card */
+ err = sd_select_driver_type(card, status);
+
+out:
+ kfree(status);
+
+ return err;
+}
+
MMC_DEV_ATTR(cid, "%08x%08x%08x%08x\n", card->raw_cid[0], card->raw_cid[1],
card->raw_cid[2], card->raw_cid[3]);
MMC_DEV_ATTR(csd, "%08x%08x%08x%08x\n", card->raw_csd[0], card->raw_csd[1],
@@ -474,10 +554,10 @@ struct device_type sd_type = {
/*
* Fetch CID from card.
*/
-int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid)
+int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid,
+ u32 *rocr)
{
int err;
- u32 rocr;
/*
* Since we're changing the OCR value, we seem to
@@ -502,7 +582,7 @@ int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid)
MMC_CAP_SET_XPC_180))
ocr |= 1 << 28;
- err = mmc_send_app_op_cond(host, ocr, &rocr);
+ err = mmc_send_app_op_cond(host, ocr, rocr);
if (err)
return err;
@@ -510,7 +590,7 @@ int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid)
* In case CCS and S18A in the response is set, start Signal Voltage
* Switch procedure. SPI mode doesn't support CMD11.
*/
- if (!mmc_host_is_spi(host) && (rocr & 0x41000000)) {
+ if (!mmc_host_is_spi(host) && rocr && (*rocr & 0x41000000)) {
err = mmc_start_voltage_switch(host);
if (err)
return err;
@@ -643,11 +723,12 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
struct mmc_card *card;
int err;
u32 cid[4];
+ u32 rocr;
BUG_ON(!host);
WARN_ON(!host->claimed);
- err = mmc_sd_get_cid(host, ocr, cid);
+ err = mmc_sd_get_cid(host, ocr, cid, &rocr);
if (err)
return err;
@@ -700,30 +781,37 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
if (err)
goto free_card;
- /*
- * Attempt to change to high-speed (if supported)
- */
- err = mmc_sd_switch_hs(card);
- if (err > 0)
- mmc_sd_go_highspeed(card);
- else if (err)
- goto free_card;
-
- /*
- * Set bus speed.
- */
- mmc_set_clock(host, mmc_sd_get_max_clock(card));
-
- /*
- * Switch to wider bus (if supported).
- */
- if ((host->caps & MMC_CAP_4_BIT_DATA) &&
- (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) {
- err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4);
+ /* Initialization sequence for UHS-I cards */
+ if (rocr & 0x01000000) {
+ err = mmc_sd_init_uhs_card(card);
if (err)
goto free_card;
+ } else {
+ /*
+ * Attempt to change to high-speed (if supported)
+ */
+ err = mmc_sd_switch_hs(card);
+ if (err > 0)
+ mmc_sd_go_highspeed(card);
+ else if (err)
+ goto free_card;
+
+ /*
+ * Set bus speed.
+ */
+ mmc_set_clock(host, mmc_sd_get_max_clock(card));
- mmc_set_bus_width(host, MMC_BUS_WIDTH_4);
+ /*
+ * Switch to wider bus (if supported).
+ */
+ if ((host->caps & MMC_CAP_4_BIT_DATA) &&
+ (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) {
+ err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4);
+ if (err)
+ goto free_card;
+
+ mmc_set_bus_width(host, MMC_BUS_WIDTH_4);
+ }
}
host->card = card;
@@ -5,7 +5,8 @@
extern struct device_type sd_type;
-int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid);
+int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid,
+ u32 *rocr);
int mmc_sd_get_csd(struct mmc_host *host, struct mmc_card *card);
void mmc_decode_cid(struct mmc_card *card);
int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
@@ -364,7 +364,8 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
}
if (ocr & R4_MEMORY_PRESENT
- && mmc_sd_get_cid(host, host->ocr & ocr, card->raw_cid) == 0) {
+ && mmc_sd_get_cid(host, host->ocr & ocr, card->raw_cid,
+ NULL) == 0) {
card->type = MMC_TYPE_SD_COMBO;
if (oldcard && (oldcard->type != MMC_TYPE_SD_COMBO ||
@@ -63,7 +63,7 @@ static void sdhci_dumpregs(struct sdhci_host *host)
sdhci_readw(host, SDHCI_TRANSFER_MODE));
printk(KERN_DEBUG DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n",
sdhci_readl(host, SDHCI_PRESENT_STATE),
- sdhci_readb(host, SDHCI_HOST_CONTROL));
+ sdhci_readb(host, SDHCI_HOST_CONTROL1));
printk(KERN_DEBUG DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n",
sdhci_readb(host, SDHCI_POWER_CONTROL),
sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL));
@@ -216,18 +216,18 @@ static void sdhci_activate_led(struct sdhci_host *host)
{
u8 ctrl;
- ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL1);
ctrl |= SDHCI_CTRL_LED;
- sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL1);
}
static void sdhci_deactivate_led(struct sdhci_host *host)
{
u8 ctrl;
- ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL1);
ctrl &= ~SDHCI_CTRL_LED;
- sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL1);
}
#ifdef SDHCI_USE_LEDS_CLASS
@@ -786,14 +786,14 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
* is ADMA.
*/
if (host->version >= SDHCI_SPEC_200) {
- ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL1);
ctrl &= ~SDHCI_CTRL_DMA_MASK;
if ((host->flags & SDHCI_REQ_USE_DMA) &&
(host->flags & SDHCI_USE_ADMA))
ctrl |= SDHCI_CTRL_ADMA32;
else
ctrl |= SDHCI_CTRL_SDMA;
- sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL1);
}
if (!(host->flags & SDHCI_REQ_USE_DMA)) {
@@ -1252,7 +1252,7 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
if (host->ops->platform_8bit_width)
host->ops->platform_8bit_width(host, ios->bus_width);
else {
- ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL1);
if (ios->bus_width == MMC_BUS_WIDTH_8) {
ctrl &= ~SDHCI_CTRL_4BITBUS;
if (host->version >= SDHCI_SPEC_300)
@@ -1265,10 +1265,10 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
else
ctrl &= ~SDHCI_CTRL_4BITBUS;
}
- sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL1);
}
- ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL1);
if ((ios->timing == MMC_TIMING_SD_HS ||
ios->timing == MMC_TIMING_MMC_HS)
@@ -1277,7 +1277,25 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
else
ctrl &= ~SDHCI_CTRL_HISPD;
- sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL1);
+
+ if (host->version >= SDHCI_SPEC_300) {
+ u16 ctrl_2;
+
+ ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ if (!(ctrl_2 & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
+ /*
+ * We only need to set Driver Strength if the
+ * preset value enable is not set.
+ */
+ if (ios->drv_type == MMC_SET_DRIVER_TYPE_A)
+ ctrl_2 |= SDHCI_CTRL_DRV_TYPE_A;
+ else if (ios->drv_type == MMC_SET_DRIVER_TYPE_C)
+ ctrl_2 |= SDHCI_CTRL_DRV_TYPE_C;
+
+ sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+ }
+ }
/*
* Some (ENE) controllers go apeshit on some ios operation,
@@ -2037,6 +2055,14 @@ int sdhci_add_host(struct sdhci_host *host)
if (caps[1] & SDHCI_SUPPORT_DDR50)
mmc->caps |= MMC_CAP_UHS_DDR50;
+ /* Driver Type(s) (A, C, D) supported by the host */
+ if (caps[1] & SDHCI_DRIVER_TYPE_A)
+ mmc->caps |= MMC_CAP_DRIVER_TYPE_A;
+ if (caps[1] & SDHCI_DRIVER_TYPE_C)
+ mmc->caps |= MMC_CAP_DRIVER_TYPE_C;
+ if (caps[1] & SDHCI_DRIVER_TYPE_D)
+ mmc->caps |= MMC_CAP_DRIVER_TYPE_D;
+
ocr_avail = 0;
/*
* According to SD Host Controller spec v3.00, if the Host System
@@ -72,7 +72,7 @@
#define SDHCI_DATA_LVL_MASK 0x00F00000
#define SDHCI_DATA_LVL_SHIFT 20
-#define SDHCI_HOST_CONTROL 0x28
+#define SDHCI_HOST_CONTROL1 0x28
#define SDHCI_CTRL_LED 0x01
#define SDHCI_CTRL_4BITBUS 0x02
#define SDHCI_CTRL_HISPD 0x04
@@ -151,6 +151,11 @@
#define SDHCI_HOST_CONTROL2 0x3E
#define SDHCI_CTRL_VDD_180 0x0008
+#define SDHCI_CTRL_DRV_TYPE_B 0x0000
+#define SDHCI_CTRL_DRV_TYPE_A 0x0010
+#define SDHCI_CTRL_DRV_TYPE_C 0x0020
+#define SDHCI_CTRL_DRV_TYPE_D 0x0030
+#define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000
#define SDHCI_CAPABILITIES 0x40
#define SDHCI_TIMEOUT_CLK_MASK 0x0000003F
@@ -174,6 +179,9 @@
#define SDHCI_SUPPORT_SDR50 0x00000001
#define SDHCI_SUPPORT_SDR104 0x00000002
#define SDHCI_SUPPORT_DDR50 0x00000004
+#define SDHCI_DRIVER_TYPE_A 0x00000010
+#define SDHCI_DRIVER_TYPE_C 0x00000020
+#define SDHCI_DRIVER_TYPE_D 0x00000040
#define SDHCI_CAPABILITIES_1 0x44
@@ -77,6 +77,10 @@ struct sd_switch_caps {
unsigned int hs_max_dtr;
unsigned int uhs_bus_mode;
unsigned int uhs_drv_type;
+#define SD_DRIVER_TYPE_B 0x01
+#define SD_DRIVER_TYPE_A 0x02
+#define SD_DRIVER_TYPE_C 0x04
+#define SD_DRIVER_TYPE_D 0x08
unsigned int uhs_curr_limit;
};
@@ -56,6 +56,11 @@ struct mmc_ios {
#define MMC_SDR_MODE 0
#define MMC_1_2V_DDR_MODE 1
#define MMC_1_8V_DDR_MODE 2
+
+ unsigned char drv_type; /* driver type (A, C, D) */
+
+#define MMC_SET_DRIVER_TYPE_A 1
+#define MMC_SET_DRIVER_TYPE_C 2
};
struct mmc_host_ops {
@@ -183,6 +188,9 @@ struct mmc_host {
#define MMC_CAP_SET_XPC_330 (1 << 20) /* Host supports >150mA current at 3.3V */
#define MMC_CAP_SET_XPC_300 (1 << 21) /* Host supports >150mA current at 3.0V */
#define MMC_CAP_SET_XPC_180 (1 << 22) /* Host supports >150mA current at 1.8V */
+#define MMC_CAP_DRIVER_TYPE_A (1 << 23) /* Host supports Driver Type A */
+#define MMC_CAP_DRIVER_TYPE_C (1 << 24) /* Host supports Driver Type C */
+#define MMC_CAP_DRIVER_TYPE_D (1 << 25) /* Host supports Driver Type D */
mmc_pm_flag_t pm_caps; /* supported pm features */