@@ -10,7 +10,7 @@
*/
#include <linux/mmc/sh_mmcif.h>
-#include <mach/mmcif.h>
+#include <mach/mmc.h>
#define MMCIF_BASE (void __iomem *)0xe6bd0000
@@ -41,8 +41,8 @@
*/
asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len)
{
- mmcif_init_progress();
- mmcif_update_progress(MMCIF_PROGRESS_ENTER);
+ mmc_init_progress();
+ mmc_update_progress(MMCIF_PROGRESS_ENTER);
/* Initialise MMC
* registers: PORT84CR-PORT92CR
@@ -68,12 +68,12 @@ asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len)
/* Enable clock to MMC hardware block */
__raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 12), SMSTPCR3);
- mmcif_update_progress(MMCIF_PROGRESS_INIT);
+ mmc_update_progress(MMCIF_PROGRESS_INIT);
/* setup MMCIF hardware */
sh_mmcif_boot_init(MMCIF_BASE);
- mmcif_update_progress(MMCIF_PROGRESS_LOAD);
+ mmc_update_progress(MMCIF_PROGRESS_LOAD);
/* load kernel via MMCIF interface */
sh_mmcif_boot_do_read(MMCIF_BASE, 2, /* Kernel is at block 2 */
@@ -83,5 +83,5 @@ asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len)
/* Disable clock to MMC hardware block */
__raw_writel(__raw_readl(SMSTPCR3) & (1 << 12), SMSTPCR3);
- mmcif_update_progress(MMCIF_PROGRESS_DONE);
+ mmc_update_progress(MMCIF_PROGRESS_DONE);
}
new file mode 100644
@@ -0,0 +1,29 @@
+#ifndef MMC_AP4EB_H
+#define MMC_AP4EB_H
+
+#define PORT185CR (void __iomem *)0xe60520b9
+#define PORT186CR (void __iomem *)0xe60520ba
+#define PORT187CR (void __iomem *)0xe60520bb
+#define PORT188CR (void __iomem *)0xe60520bc
+
+#define PORTR191_160DR (void __iomem *)0xe6056014
+
+static inline void mmc_init_progress(void)
+{
+ /* Initialise LEDS1-4
+ * registers: PORT185CR-PORT188CR (LED1-LED4 Control)
+ * value: 0x10 - enable output
+ */
+ __raw_writeb(0x10, PORT185CR);
+ __raw_writeb(0x10, PORT186CR);
+ __raw_writeb(0x10, PORT187CR);
+ __raw_writeb(0x10, PORT188CR);
+}
+
+static inline void mmc_update_progress(int n)
+{
+ __raw_writel((__raw_readl(PORTR191_160DR) & ~(0xf << 25)) |
+ (1 << (25 + n)), PORTR191_160DR);
+}
+
+#endif /* MMC_AP4EB_H */
new file mode 100644
@@ -0,0 +1,38 @@
+#ifndef MMC_MACKEREL_H
+#define MMC_MACKEREL_H
+
+#define PORT0CR (void __iomem *)0xe6051000
+#define PORT1CR (void __iomem *)0xe6051001
+#define PORT2CR (void __iomem *)0xe6051002
+#define PORT159CR (void __iomem *)0xe605009f
+
+#define PORTR031_000DR (void __iomem *)0xe6055000
+#define PORTL159_128DR (void __iomem *)0xe6054010
+
+static inline void mmc_init_progress(void)
+{
+ /* Initialise LEDS0-3
+ * registers: PORT0CR-PORT2CR,PORT159CR (LED0-LED3 Control)
+ * value: 0x10 - enable output
+ */
+ __raw_writeb(0x10, PORT0CR);
+ __raw_writeb(0x10, PORT1CR);
+ __raw_writeb(0x10, PORT2CR);
+ __raw_writeb(0x10, PORT159CR);
+}
+
+static inline void mmc_update_progress(int n)
+{
+ unsigned a = 0, b = 0;
+
+ if (n < 3)
+ a = 1 << n;
+ else
+ b = 1 << 31;
+
+ __raw_writel((__raw_readl(PORTR031_000DR) & ~0x7) | a,
+ PORTR031_000DR);
+ __raw_writel((__raw_readl(PORTL159_128DR) & ~(1 << 31)) | b,
+ PORTL159_128DR);
+}
+#endif /* MMC_MACKEREL_H */
new file mode 100644
@@ -0,0 +1,18 @@
+#ifndef MMC_H
+#define MMC_H
+
+/**************************************************
+ *
+ * board specific settings
+ *
+ **************************************************/
+
+#ifdef CONFIG_MACH_AP4EVB
+#include "mach/mmc-ap4eb.h"
+#elif CONFIG_MACH_MACKEREL
+#include "mach/mmc-mackerel.h"
+#else
+#error "unsupported board."
+#endif
+
+#endif /* MMC_H */
deleted file mode 100644
@@ -1,29 +0,0 @@
-#ifndef MMCIF_AP4EB_H
-#define MMCIF_AP4EB_H
-
-#define PORT185CR (void __iomem *)0xe60520b9
-#define PORT186CR (void __iomem *)0xe60520ba
-#define PORT187CR (void __iomem *)0xe60520bb
-#define PORT188CR (void __iomem *)0xe60520bc
-
-#define PORTR191_160DR (void __iomem *)0xe6056014
-
-static inline void mmcif_init_progress(void)
-{
- /* Initialise LEDS1-4
- * registers: PORT185CR-PORT188CR (LED1-LED4 Control)
- * value: 0x10 - enable output
- */
- __raw_writeb(0x10, PORT185CR);
- __raw_writeb(0x10, PORT186CR);
- __raw_writeb(0x10, PORT187CR);
- __raw_writeb(0x10, PORT188CR);
-}
-
-static inline void mmcif_update_progress(int n)
-{
- __raw_writel((__raw_readl(PORTR191_160DR) & ~(0xf << 25)) |
- (1 << (25 + n)), PORTR191_160DR);
-}
-
-#endif /* MMCIF_AP4EB_H */
deleted file mode 100644
@@ -1,39 +0,0 @@
-#ifndef MMCIF_MACKEREL_H
-#define MMCIF_MACKEREL_H
-
-#define PORT0CR (void __iomem *)0xe6051000
-#define PORT1CR (void __iomem *)0xe6051001
-#define PORT2CR (void __iomem *)0xe6051002
-#define PORT159CR (void __iomem *)0xe605009f
-
-#define PORTR031_000DR (void __iomem *)0xe6055000
-#define PORTL159_128DR (void __iomem *)0xe6054010
-
-static inline void mmcif_init_progress(void)
-{
- /* Initialise LEDS0-3
- * registers: PORT0CR-PORT2CR,PORT159CR (LED0-LED3 Control)
- * value: 0x10 - enable output
- */
- __raw_writeb(0x10, PORT0CR);
- __raw_writeb(0x10, PORT1CR);
- __raw_writeb(0x10, PORT2CR);
- __raw_writeb(0x10, PORT159CR);
-}
-
-static inline void mmcif_update_progress(int n)
-{
- unsigned a = 0, b = 0;
-
- if (n < 3)
- a = 1 << n;
- else
- b = 1 << 31;
-
- __raw_writel((__raw_readl(PORTR031_000DR) & ~0x7) | a,
- PORTR031_000DR);
- __raw_writel((__raw_readl(PORTL159_128DR) & ~(1 << 31)) | b,
- PORTL159_128DR);
-}
-
-#endif /* MMCIF_MACKEREL_H */
deleted file mode 100644
@@ -1,18 +0,0 @@
-#ifndef MMCIF_H
-#define MMCIF_H
-
-/**************************************************
- *
- * board specific settings
- *
- **************************************************/
-
-#ifdef CONFIG_MACH_AP4EVB
-#include "mach/mmcif-ap4eb.h"
-#elif CONFIG_MACH_MACKEREL
-#include "mach/mmcif-mackerel.h"
-#else
-#error "unsupported board."
-#endif
-
-#endif /* MMCIF_H */