@@ -410,6 +410,15 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
else
card->erased_byte = 0x0;
+ if (card->ext_csd.rev >= 6)
+ card->ext_csd.generic_cmd6_time = 10 *
+ ext_csd[EXT_CSD_GENERIC_CMD6_TIME];
+ else
+ card->ext_csd.generic_cmd6_time = 0;
+
out:
return err;
}
@@ -668,7 +677,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
*/
if (card->ext_csd.enhanced_area_en) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_ERASE_GROUP_DEF, 1, 0);
+ EXT_CSD_ERASE_GROUP_DEF, 1,
+ card->ext_csd.generic_cmd6_time);
if (err && err != -EBADMSG)
goto free_card;
@@ -711,7 +721,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
if ((card->ext_csd.hs_max_dtr != 0) &&
(host->caps & MMC_CAP_MMC_HIGHSPEED)) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_HS_TIMING, 1, 0);
+ EXT_CSD_HS_TIMING, 1,
+ card->ext_csd.generic_cmd6_time);
if (err && err != -EBADMSG)
goto free_card;
@@ -783,7 +794,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,
ext_csd_bits[idx][0],
- 0);
+ card->ext_csd.generic_cmd6_time);
if (!err) {
mmc_set_bus_width(card->host, bus_width);
@@ -806,7 +817,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,
ext_csd_bits[idx][1],
- 0);
+ card->ext_csd.generic_cmd6_time);
}
if (err) {
printk(KERN_WARNING "%s: switch to bus width %d ddr %d "
@@ -52,6 +52,7 @@ struct mmc_ext_csd {
u8 part_config;
unsigned int part_time; /* Units: ms */
unsigned int sa_timeout; /* Units: 100ns */
+ unsigned int generic_cmd6_time; /* Units: 10ms */
unsigned int hs_max_dtr;
unsigned int sectors;
unsigned int card_type;
@@ -293,6 +293,7 @@ struct _mmc_csd {
#define EXT_CSD_SEC_ERASE_MULT 230 /* RO */
#define EXT_CSD_SEC_FEATURE_SUPPORT 231 /* RO */
#define EXT_CSD_TRIM_MULT 232 /* RO */
+#define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */
/*
* EXT_CSD field definitions
EXT_CSD[248] includes the default maximum timeout for CMD6. This field is added at eMMC4.5 Spec. And it can be used for default timeout except for some operations which don't define the timeout(i.e. background operation, sanitize, flush cache) in eMMC4.5 Spec. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> --- drivers/mmc/core/mmc.c | 19 +++++++++++++++---- include/linux/mmc/card.h | 1 + include/linux/mmc/mmc.h | 1 + 3 files changed, 17 insertions(+), 4 deletions(-) -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html