| Message ID | 1346787968-23709-1-git-send-email-thomas.abraham@linaro.org (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
On 09/05/2012 04:46 AM, Thomas Abraham wrote: > Some platforms allow for clock gating and control of bus interface unit clock > and card interface unit clock. Add support for clock lookup of optional biu > and ciu clocks for clock gating and clock speed determination. > > Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> > Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> > Acked-by: Will Newton <will.newton@imgtec.com> > --- > drivers/mmc/host/dw_mmc.c | 50 +++++++++++++++++++++++++++++++++++++++++-- > include/linux/mmc/dw_mmc.h | 4 +++ > 2 files changed, 51 insertions(+), 3 deletions(-) > > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c > index 227c42e..e8c8491 100644 > --- a/drivers/mmc/host/dw_mmc.c > +++ b/drivers/mmc/host/dw_mmc.c > @@ -1960,13 +1960,40 @@ int dw_mci_probe(struct dw_mci *host) > return -ENODEV; > } > > - if (!host->pdata->bus_hz) { > + host->biu_clk = clk_get(host->dev, "biu"); > + if (IS_ERR(host->biu_clk)) { > + dev_dbg(host->dev, "biu clock not available\n"); > + } else { > + ret = clk_prepare_enable(host->biu_clk); > + if (ret) { > + dev_err(host->dev, "failed to enable biu clock\n"); > + return ret; didn't clk_put() for biu_clk? > + } > + } > + > + host->ciu_clk = clk_get(host->dev, "ciu"); > + if (IS_ERR(host->ciu_clk)) { > + dev_dbg(host->dev, "ciu clock not available\n"); > + } else { > + ret = clk_prepare_enable(host->ciu_clk); > + if (ret) { > + dev_err(host->dev, "failed to enable ciu clock\n"); > + goto err_clk_biu; > + } > + } > + > + if (IS_ERR(host->ciu_clk)) > + host->bus_hz = host->pdata->bus_hz; > + else > + host->bus_hz = clk_get_rate(host->ciu_clk); > + > + if (!host->bus_hz) { > dev_err(host->dev, > "Platform data must supply bus speed\n"); > - return -ENODEV; > + ret = -ENODEV; > + goto err_clk_ciu; > } > > - host->bus_hz = host->pdata->bus_hz; > host->quirks = host->pdata->quirks; > > spin_lock_init(&host->lock); > @@ -2116,6 +2143,17 @@ err_dmaunmap: > regulator_disable(host->vmmc); > regulator_put(host->vmmc); > } > + > +err_clk_ciu: > + if (!IS_ERR(host->ciu_clk)) { > + clk_disable_unprepare(host->ciu_clk); > + clk_put(host->ciu_clk); > + } > +err_clk_biu: I think right that is located the clk_put(host->ciu_clk) at here > + if (!IS_ERR(host->biu_clk)) { > + clk_disable_unprepare(host->biu_clk); > + clk_put(host->biu_clk); > + } > return ret; > } > EXPORT_SYMBOL(dw_mci_probe); > @@ -2149,6 +2187,12 @@ void dw_mci_remove(struct dw_mci *host) > regulator_put(host->vmmc); > } > > + if (!IS_ERR(host->ciu_clk)) > + clk_disable_unprepare(host->ciu_clk); > + if (!IS_ERR(host->biu_clk)) > + clk_disable_unprepare(host->biu_clk); > + clk_put(host->ciu_clk); > + clk_put(host->biu_clk); > } > EXPORT_SYMBOL(dw_mci_remove); > > diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h > index a37a573..787ad56 100644 > --- a/include/linux/mmc/dw_mmc.h > +++ b/include/linux/mmc/dw_mmc.h > @@ -78,6 +78,8 @@ struct mmc_data; > * @data_offset: Set the offset of DATA register according to VERID. > * @dev: Device associated with the MMC controller. > * @pdata: Platform data associated with the MMC controller. > + * @biu_clk: Pointer to bus interface unit clock instance. > + * @ciu_clk: Pointer to card interface unit clock instance. > * @slot: Slots sharing this MMC controller. > * @fifo_depth: depth of FIFO. > * @data_shift: log2 of FIFO item size. > @@ -158,6 +160,8 @@ struct dw_mci { > u16 data_offset; > struct device *dev; > struct dw_mci_board *pdata; > + struct clk *biu_clk; > + struct clk *ciu_clk; > struct dw_mci_slot *slot[MAX_MCI_SLOTS]; > > /* FIFO push and pull */ > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Jaehoon, Thanks for reviewing the patch. On 5 September 2012 14:00, Jaehoon Chung <jh80.chung@samsung.com> wrote: > On 09/05/2012 04:46 AM, Thomas Abraham wrote: >> Some platforms allow for clock gating and control of bus interface unit clock >> and card interface unit clock. Add support for clock lookup of optional biu >> and ciu clocks for clock gating and clock speed determination. >> >> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> >> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> >> Acked-by: Will Newton <will.newton@imgtec.com> >> --- >> drivers/mmc/host/dw_mmc.c | 50 +++++++++++++++++++++++++++++++++++++++++-- >> include/linux/mmc/dw_mmc.h | 4 +++ >> 2 files changed, 51 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c >> index 227c42e..e8c8491 100644 >> --- a/drivers/mmc/host/dw_mmc.c >> +++ b/drivers/mmc/host/dw_mmc.c >> @@ -1960,13 +1960,40 @@ int dw_mci_probe(struct dw_mci *host) >> return -ENODEV; >> } >> >> - if (!host->pdata->bus_hz) { >> + host->biu_clk = clk_get(host->dev, "biu"); >> + if (IS_ERR(host->biu_clk)) { >> + dev_dbg(host->dev, "biu clock not available\n"); >> + } else { >> + ret = clk_prepare_enable(host->biu_clk); >> + if (ret) { >> + dev_err(host->dev, "failed to enable biu clock\n"); >> + return ret; > didn't clk_put() for biu_clk? Yes, I missed that. Thanks for pointing this out. I will fix this. >> + } >> + } >> + >> + host->ciu_clk = clk_get(host->dev, "ciu"); >> + if (IS_ERR(host->ciu_clk)) { >> + dev_dbg(host->dev, "ciu clock not available\n"); >> + } else { >> + ret = clk_prepare_enable(host->ciu_clk); >> + if (ret) { >> + dev_err(host->dev, "failed to enable ciu clock\n"); >> + goto err_clk_biu; >> + } >> + } >> + >> + if (IS_ERR(host->ciu_clk)) >> + host->bus_hz = host->pdata->bus_hz; >> + else >> + host->bus_hz = clk_get_rate(host->ciu_clk); >> + >> + if (!host->bus_hz) { >> dev_err(host->dev, >> "Platform data must supply bus speed\n"); >> - return -ENODEV; >> + ret = -ENODEV; >> + goto err_clk_ciu; >> } >> >> - host->bus_hz = host->pdata->bus_hz; >> host->quirks = host->pdata->quirks; >> >> spin_lock_init(&host->lock); >> @@ -2116,6 +2143,17 @@ err_dmaunmap: >> regulator_disable(host->vmmc); >> regulator_put(host->vmmc); >> } >> + >> +err_clk_ciu: >> + if (!IS_ERR(host->ciu_clk)) { >> + clk_disable_unprepare(host->ciu_clk); >> + clk_put(host->ciu_clk); >> + } >> +err_clk_biu: > I think right that is located the clk_put(host->ciu_clk) at here In the next version of this patch, if clk_prepare_enable() fails for host->ciu_clk, the put(host->ciu_clk) is also done before returning. Thanks, Thomas. >> + if (!IS_ERR(host->biu_clk)) { >> + clk_disable_unprepare(host->biu_clk); >> + clk_put(host->biu_clk); >> + } >> return ret; >> } >> EXPORT_SYMBOL(dw_mci_probe); >> @@ -2149,6 +2187,12 @@ void dw_mci_remove(struct dw_mci *host) >> regulator_put(host->vmmc); >> } >> >> + if (!IS_ERR(host->ciu_clk)) >> + clk_disable_unprepare(host->ciu_clk); >> + if (!IS_ERR(host->biu_clk)) >> + clk_disable_unprepare(host->biu_clk); >> + clk_put(host->ciu_clk); >> + clk_put(host->biu_clk); >> } >> EXPORT_SYMBOL(dw_mci_remove); >> >> diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h >> index a37a573..787ad56 100644 >> --- a/include/linux/mmc/dw_mmc.h >> +++ b/include/linux/mmc/dw_mmc.h >> @@ -78,6 +78,8 @@ struct mmc_data; >> * @data_offset: Set the offset of DATA register according to VERID. >> * @dev: Device associated with the MMC controller. >> * @pdata: Platform data associated with the MMC controller. >> + * @biu_clk: Pointer to bus interface unit clock instance. >> + * @ciu_clk: Pointer to card interface unit clock instance. >> * @slot: Slots sharing this MMC controller. >> * @fifo_depth: depth of FIFO. >> * @data_shift: log2 of FIFO item size. >> @@ -158,6 +160,8 @@ struct dw_mci { >> u16 data_offset; >> struct device *dev; >> struct dw_mci_board *pdata; >> + struct clk *biu_clk; >> + struct clk *ciu_clk; >> struct dw_mci_slot *slot[MAX_MCI_SLOTS]; >> >> /* FIFO push and pull */ >> > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 227c42e..e8c8491 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1960,13 +1960,40 @@ int dw_mci_probe(struct dw_mci *host) return -ENODEV; } - if (!host->pdata->bus_hz) { + host->biu_clk = clk_get(host->dev, "biu"); + if (IS_ERR(host->biu_clk)) { + dev_dbg(host->dev, "biu clock not available\n"); + } else { + ret = clk_prepare_enable(host->biu_clk); + if (ret) { + dev_err(host->dev, "failed to enable biu clock\n"); + return ret; + } + } + + host->ciu_clk = clk_get(host->dev, "ciu"); + if (IS_ERR(host->ciu_clk)) { + dev_dbg(host->dev, "ciu clock not available\n"); + } else { + ret = clk_prepare_enable(host->ciu_clk); + if (ret) { + dev_err(host->dev, "failed to enable ciu clock\n"); + goto err_clk_biu; + } + } + + if (IS_ERR(host->ciu_clk)) + host->bus_hz = host->pdata->bus_hz; + else + host->bus_hz = clk_get_rate(host->ciu_clk); + + if (!host->bus_hz) { dev_err(host->dev, "Platform data must supply bus speed\n"); - return -ENODEV; + ret = -ENODEV; + goto err_clk_ciu; } - host->bus_hz = host->pdata->bus_hz; host->quirks = host->pdata->quirks; spin_lock_init(&host->lock); @@ -2116,6 +2143,17 @@ err_dmaunmap: regulator_disable(host->vmmc); regulator_put(host->vmmc); } + +err_clk_ciu: + if (!IS_ERR(host->ciu_clk)) { + clk_disable_unprepare(host->ciu_clk); + clk_put(host->ciu_clk); + } +err_clk_biu: + if (!IS_ERR(host->biu_clk)) { + clk_disable_unprepare(host->biu_clk); + clk_put(host->biu_clk); + } return ret; } EXPORT_SYMBOL(dw_mci_probe); @@ -2149,6 +2187,12 @@ void dw_mci_remove(struct dw_mci *host) regulator_put(host->vmmc); } + if (!IS_ERR(host->ciu_clk)) + clk_disable_unprepare(host->ciu_clk); + if (!IS_ERR(host->biu_clk)) + clk_disable_unprepare(host->biu_clk); + clk_put(host->ciu_clk); + clk_put(host->biu_clk); } EXPORT_SYMBOL(dw_mci_remove); diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h index a37a573..787ad56 100644 --- a/include/linux/mmc/dw_mmc.h +++ b/include/linux/mmc/dw_mmc.h @@ -78,6 +78,8 @@ struct mmc_data; * @data_offset: Set the offset of DATA register according to VERID. * @dev: Device associated with the MMC controller. * @pdata: Platform data associated with the MMC controller. + * @biu_clk: Pointer to bus interface unit clock instance. + * @ciu_clk: Pointer to card interface unit clock instance. * @slot: Slots sharing this MMC controller. * @fifo_depth: depth of FIFO. * @data_shift: log2 of FIFO item size. @@ -158,6 +160,8 @@ struct dw_mci { u16 data_offset; struct device *dev; struct dw_mci_board *pdata; + struct clk *biu_clk; + struct clk *ciu_clk; struct dw_mci_slot *slot[MAX_MCI_SLOTS]; /* FIFO push and pull */