Message ID | 1350011561-21039-3-git-send-email-aaron.lu@intel.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Friday 12 of October 2012 11:12:39 Aaron Lu wrote: > ACPI spec defines the _ADDR encoding for sdio bus as: > High word - slot number (0 based) > Low word - function number > > This patch adds support for sdio device binding with acpi using the > generic ACPI glue framework. > > Signed-off-by: Aaron Lu <aaron.lu@intel.com> > --- > drivers/mmc/core/Makefile | 1 + > drivers/mmc/core/sdio_acpi.c | 35 +++++++++++++++++++++++++++++++++++ > drivers/mmc/core/sdio_bus.c | 14 ++++++++++++-- > drivers/mmc/core/sdio_bus.h | 2 ++ > 4 files changed, 50 insertions(+), 2 deletions(-) > create mode 100644 drivers/mmc/core/sdio_acpi.c > > diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile > index 38ed210..c8300aa 100644 > --- a/drivers/mmc/core/Makefile > +++ b/drivers/mmc/core/Makefile > @@ -10,3 +10,4 @@ mmc_core-y := core.o bus.o host.o \ > quirks.o slot-gpio.o > > mmc_core-$(CONFIG_DEBUG_FS) += debugfs.o > +mmc_core-$(CONFIG_ACPI) += sdio_acpi.o > diff --git a/drivers/mmc/core/sdio_acpi.c b/drivers/mmc/core/sdio_acpi.c > new file mode 100644 > index 0000000..0f92e90 > --- /dev/null > +++ b/drivers/mmc/core/sdio_acpi.c > @@ -0,0 +1,35 @@ > +#include <linux/mmc/host.h> > +#include <linux/mmc/card.h> > +#include <linux/mmc/sdhci.h> > +#include <linux/mmc/sdio_func.h> > +#include <linux/acpi.h> > +#include <acpi/acpi_bus.h> > +#include "sdio_bus.h" > + > +static int acpi_sdio_find_device(struct device *dev, acpi_handle *handle) > +{ > + struct sdio_func *func; > + struct sdhci_host *host; > + u64 addr; > + > + func = dev_to_sdio_func(dev); > + host = mmc_priv(func->card->host); > + > + addr = (host->slotno << 16) | func->num; > + > + *handle = acpi_get_child(DEVICE_ACPI_HANDLE(dev), addr); > + if (!*handle) > + return -ENODEV; > + > + return 0; > +} > + > +static struct acpi_bus_type acpi_sdio_bus = { > + .bus = &sdio_bus_type, > + .find_device = acpi_sdio_find_device, > +}; > + > +int sdio_acpi_register(void) I'd call it sdio_acpi_register_bus(). > +{ > + return register_acpi_bus_type(&acpi_sdio_bus); > +} > diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c > index 6bf6879..aaec9e2 100644 > --- a/drivers/mmc/core/sdio_bus.c > +++ b/drivers/mmc/core/sdio_bus.c > @@ -23,6 +23,7 @@ > > #include "sdio_cis.h" > #include "sdio_bus.h" > +#include "sdio_acpi.h" > > /* show configuration fields */ > #define sdio_config_attr(field, format_string) \ > @@ -209,7 +210,7 @@ static const struct dev_pm_ops sdio_bus_pm_ops = { > > #endif /* !CONFIG_PM */ > > -static struct bus_type sdio_bus_type = { > +struct bus_type sdio_bus_type = { > .name = "sdio", > .dev_attrs = sdio_dev_attrs, > .match = sdio_bus_match, > @@ -221,7 +222,16 @@ static struct bus_type sdio_bus_type = { > > int sdio_register_bus(void) > { > - return bus_register(&sdio_bus_type); > + int ret; > + > + ret = bus_register(&sdio_bus_type); > + if (ret) > + goto out; > + > + ret = sdio_acpi_register(); What happens if this fails? > + > +out: > + return ret; > } > > void sdio_unregister_bus(void) > diff --git a/drivers/mmc/core/sdio_bus.h b/drivers/mmc/core/sdio_bus.h > index 567a768..91c0e93 100644 > --- a/drivers/mmc/core/sdio_bus.h > +++ b/drivers/mmc/core/sdio_bus.h > @@ -18,5 +18,7 @@ void sdio_remove_func(struct sdio_func *func); > int sdio_register_bus(void); > void sdio_unregister_bus(void); > > +extern struct bus_type sdio_bus_type; > + > #endif Thanks, Rafael
On Fri, Oct 19, 2012 at 01:25:46AM +0200, Rafael J. Wysocki wrote: > On Friday 12 of October 2012 11:12:39 Aaron Lu wrote: > > ACPI spec defines the _ADDR encoding for sdio bus as: > > High word - slot number (0 based) > > Low word - function number > > > > This patch adds support for sdio device binding with acpi using the > > generic ACPI glue framework. > > > > Signed-off-by: Aaron Lu <aaron.lu@intel.com> > > --- > > drivers/mmc/core/Makefile | 1 + > > drivers/mmc/core/sdio_acpi.c | 35 +++++++++++++++++++++++++++++++++++ > > drivers/mmc/core/sdio_bus.c | 14 ++++++++++++-- > > drivers/mmc/core/sdio_bus.h | 2 ++ > > 4 files changed, 50 insertions(+), 2 deletions(-) > > create mode 100644 drivers/mmc/core/sdio_acpi.c > > > > diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile > > index 38ed210..c8300aa 100644 > > --- a/drivers/mmc/core/Makefile > > +++ b/drivers/mmc/core/Makefile > > @@ -10,3 +10,4 @@ mmc_core-y := core.o bus.o host.o \ > > quirks.o slot-gpio.o > > > > mmc_core-$(CONFIG_DEBUG_FS) += debugfs.o > > +mmc_core-$(CONFIG_ACPI) += sdio_acpi.o > > diff --git a/drivers/mmc/core/sdio_acpi.c b/drivers/mmc/core/sdio_acpi.c > > new file mode 100644 > > index 0000000..0f92e90 > > --- /dev/null > > +++ b/drivers/mmc/core/sdio_acpi.c > > @@ -0,0 +1,35 @@ > > +#include <linux/mmc/host.h> > > +#include <linux/mmc/card.h> > > +#include <linux/mmc/sdhci.h> > > +#include <linux/mmc/sdio_func.h> > > +#include <linux/acpi.h> > > +#include <acpi/acpi_bus.h> > > +#include "sdio_bus.h" > > + > > +static int acpi_sdio_find_device(struct device *dev, acpi_handle *handle) > > +{ > > + struct sdio_func *func; > > + struct sdhci_host *host; > > + u64 addr; > > + > > + func = dev_to_sdio_func(dev); > > + host = mmc_priv(func->card->host); > > + > > + addr = (host->slotno << 16) | func->num; > > + > > + *handle = acpi_get_child(DEVICE_ACPI_HANDLE(dev), addr); > > + if (!*handle) > > + return -ENODEV; > > + > > + return 0; > > +} > > + > > +static struct acpi_bus_type acpi_sdio_bus = { > > + .bus = &sdio_bus_type, > > + .find_device = acpi_sdio_find_device, > > +}; > > + > > +int sdio_acpi_register(void) > > I'd call it sdio_acpi_register_bus(). OK, will update this in v2. > > > +{ > > + return register_acpi_bus_type(&acpi_sdio_bus); > > +} > > diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c > > index 6bf6879..aaec9e2 100644 > > --- a/drivers/mmc/core/sdio_bus.c > > +++ b/drivers/mmc/core/sdio_bus.c > > @@ -23,6 +23,7 @@ > > > > #include "sdio_cis.h" > > #include "sdio_bus.h" > > +#include "sdio_acpi.h" > > > > /* show configuration fields */ > > #define sdio_config_attr(field, format_string) \ > > @@ -209,7 +210,7 @@ static const struct dev_pm_ops sdio_bus_pm_ops = { > > > > #endif /* !CONFIG_PM */ > > > > -static struct bus_type sdio_bus_type = { > > +struct bus_type sdio_bus_type = { > > .name = "sdio", > > .dev_attrs = sdio_dev_attrs, > > .match = sdio_bus_match, > > @@ -221,7 +222,16 @@ static struct bus_type sdio_bus_type = { > > > > int sdio_register_bus(void) > > { > > - return bus_register(&sdio_bus_type); > > + int ret; > > + > > + ret = bus_register(&sdio_bus_type); > > + if (ret) > > + goto out; > > + > > + ret = sdio_acpi_register(); > > What happens if this fails? Oh, yes, it shouldn't affect the sdio_register_bus function. So I'll not check its return value in v2. Thanks, Aaron > > > + > > +out: > > + return ret; > > } > > > > void sdio_unregister_bus(void) > > diff --git a/drivers/mmc/core/sdio_bus.h b/drivers/mmc/core/sdio_bus.h > > index 567a768..91c0e93 100644 > > --- a/drivers/mmc/core/sdio_bus.h > > +++ b/drivers/mmc/core/sdio_bus.h > > @@ -18,5 +18,7 @@ void sdio_remove_func(struct sdio_func *func); > > int sdio_register_bus(void); > > void sdio_unregister_bus(void); > > > > +extern struct bus_type sdio_bus_type; > > + > > #endif > > Thanks, > Rafael > > > -- > I speak only for myself. > Rafael J. Wysocki, Intel Open Source Technology Center. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile index 38ed210..c8300aa 100644 --- a/drivers/mmc/core/Makefile +++ b/drivers/mmc/core/Makefile @@ -10,3 +10,4 @@ mmc_core-y := core.o bus.o host.o \ quirks.o slot-gpio.o mmc_core-$(CONFIG_DEBUG_FS) += debugfs.o +mmc_core-$(CONFIG_ACPI) += sdio_acpi.o diff --git a/drivers/mmc/core/sdio_acpi.c b/drivers/mmc/core/sdio_acpi.c new file mode 100644 index 0000000..0f92e90 --- /dev/null +++ b/drivers/mmc/core/sdio_acpi.c @@ -0,0 +1,35 @@ +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/mmc/sdhci.h> +#include <linux/mmc/sdio_func.h> +#include <linux/acpi.h> +#include <acpi/acpi_bus.h> +#include "sdio_bus.h" + +static int acpi_sdio_find_device(struct device *dev, acpi_handle *handle) +{ + struct sdio_func *func; + struct sdhci_host *host; + u64 addr; + + func = dev_to_sdio_func(dev); + host = mmc_priv(func->card->host); + + addr = (host->slotno << 16) | func->num; + + *handle = acpi_get_child(DEVICE_ACPI_HANDLE(dev), addr); + if (!*handle) + return -ENODEV; + + return 0; +} + +static struct acpi_bus_type acpi_sdio_bus = { + .bus = &sdio_bus_type, + .find_device = acpi_sdio_find_device, +}; + +int sdio_acpi_register(void) +{ + return register_acpi_bus_type(&acpi_sdio_bus); +} diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index 6bf6879..aaec9e2 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -23,6 +23,7 @@ #include "sdio_cis.h" #include "sdio_bus.h" +#include "sdio_acpi.h" /* show configuration fields */ #define sdio_config_attr(field, format_string) \ @@ -209,7 +210,7 @@ static const struct dev_pm_ops sdio_bus_pm_ops = { #endif /* !CONFIG_PM */ -static struct bus_type sdio_bus_type = { +struct bus_type sdio_bus_type = { .name = "sdio", .dev_attrs = sdio_dev_attrs, .match = sdio_bus_match, @@ -221,7 +222,16 @@ static struct bus_type sdio_bus_type = { int sdio_register_bus(void) { - return bus_register(&sdio_bus_type); + int ret; + + ret = bus_register(&sdio_bus_type); + if (ret) + goto out; + + ret = sdio_acpi_register(); + +out: + return ret; } void sdio_unregister_bus(void) diff --git a/drivers/mmc/core/sdio_bus.h b/drivers/mmc/core/sdio_bus.h index 567a768..91c0e93 100644 --- a/drivers/mmc/core/sdio_bus.h +++ b/drivers/mmc/core/sdio_bus.h @@ -18,5 +18,7 @@ void sdio_remove_func(struct sdio_func *func); int sdio_register_bus(void); void sdio_unregister_bus(void); +extern struct bus_type sdio_bus_type; + #endif
ACPI spec defines the _ADDR encoding for sdio bus as: High word - slot number (0 based) Low word - function number This patch adds support for sdio device binding with acpi using the generic ACPI glue framework. Signed-off-by: Aaron Lu <aaron.lu@intel.com> --- drivers/mmc/core/Makefile | 1 + drivers/mmc/core/sdio_acpi.c | 35 +++++++++++++++++++++++++++++++++++ drivers/mmc/core/sdio_bus.c | 14 ++++++++++++-- drivers/mmc/core/sdio_bus.h | 2 ++ 4 files changed, 50 insertions(+), 2 deletions(-) create mode 100644 drivers/mmc/core/sdio_acpi.c