| Message ID | 1350566815-409-14-git-send-email-mporter@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Oct 18, 2012 at 18:56:52, Porter, Matt wrote: > Adds AM33XX MMC support for am335x-bone and am335x-evm. > > Signed-off-by: Matt Porter <mporter@ti.com> > --- > arch/arm/boot/dts/am335x-bone.dts | 6 ++++++ > arch/arm/boot/dts/am335x-evm.dts | 6 ++++++ > arch/arm/boot/dts/am33xx.dtsi | 27 +++++++++++++++++++++++++++ > 3 files changed, 39 insertions(+) > > diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts > index c634f87..5510979 100644 > --- a/arch/arm/boot/dts/am335x-bone.dts > +++ b/arch/arm/boot/dts/am335x-bone.dts > @@ -70,6 +70,8 @@ > }; > > ldo3_reg: regulator@5 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; I think these min & max limits are regulator limits. Are these fields required? Add details of these additions. AFAIK fine-tuned (board specific) min/max limits should be add here(like mpu and core regulator nodes) > regulator-always-on; > }; > > @@ -78,3 +80,7 @@ > }; > }; > }; > + > +&mmc1 { > + vmmc-supply = <&ldo3_reg>; > +}; > diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts > index 185d632..d63fce8 100644 > --- a/arch/arm/boot/dts/am335x-evm.dts > +++ b/arch/arm/boot/dts/am335x-evm.dts > @@ -114,7 +114,13 @@ > }; > > vmmc_reg: regulator@12 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; =same= > regulator-always-on; > }; > }; > }; > + > +&mmc1 { > + vmmc-supply = <&vmmc_reg>; > +}; > diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi > index ab9c78f..26a6af7 100644 > --- a/arch/arm/boot/dts/am33xx.dtsi > +++ b/arch/arm/boot/dts/am33xx.dtsi > @@ -234,6 +234,33 @@ > status = "disabled"; > }; > > + mmc1: mmc@48060000 { > + compatible = "ti,omap3-hsmmc"; > + ti,hwmods = "mmc1"; > + ti,dual-volt; > + ti,needs-special-reset; > + dmas = <&edma 24 > + &edma 25>; > + dma-names = "tx", "rx"; Add status = "disabled" here and "okay" in corresponding .dts file > + }; > + > + mmc2: mmc@481d8000 { > + compatible = "ti,omap3-hsmmc"; > + ti,hwmods = "mmc2"; > + ti,needs-special-reset; > + dmas = <&edma 2 > + &edma 3>; > + dma-names = "tx", "rx"; > + status = "disabled"; > + }; > + > + mmc3: mmc@47810000 { > + compatible = "ti,omap3-hsmmc"; > + ti,hwmods = "mmc3"; > + ti,needs-special-reset; What about DMA resources for mmc3? AnilKumar > + status = "disabled"; > + }; > + > wdt2: wdt@44e35000 { > compatible = "ti,omap3-wdt"; > ti,hwmods = "wd_timer2"; > -- > 1.7.9.5 > > _______________________________________________ > devicetree-discuss mailing list > devicetree-discuss@lists.ozlabs.org > https://lists.ozlabs.org/listinfo/devicetree-discuss > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Matt, On Thu, Oct 18, 2012 at 18:56:52, Porter, Matt wrote: > Adds AM33XX MMC support for am335x-bone and am335x-evm. I want to test Suspend/Resume feature on omap hsmmc driver. Do you any tree based on mainline kernel v3.8-rc1 with these edma & mmc patches. > > Signed-off-by: Matt Porter <mporter@ti.com> > --- > arch/arm/boot/dts/am335x-bone.dts | 6 ++++++ > arch/arm/boot/dts/am335x-evm.dts | 6 ++++++ > arch/arm/boot/dts/am33xx.dtsi | 27 +++++++++++++++++++++++++++ > 3 files changed, 39 insertions(+) > ..snip.. ..snip.. ..snip.. Regards, Gururaja -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Oct 30, 2012 at 05:33:40AM +0000, AnilKumar wrote: > On Thu, Oct 18, 2012 at 18:56:52, Porter, Matt wrote: > > Adds AM33XX MMC support for am335x-bone and am335x-evm. > > > > Signed-off-by: Matt Porter <mporter@ti.com> > > --- > > arch/arm/boot/dts/am335x-bone.dts | 6 ++++++ > > arch/arm/boot/dts/am335x-evm.dts | 6 ++++++ > > arch/arm/boot/dts/am33xx.dtsi | 27 +++++++++++++++++++++++++++ > > 3 files changed, 39 insertions(+) > > > > diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts > > index c634f87..5510979 100644 > > --- a/arch/arm/boot/dts/am335x-bone.dts > > +++ b/arch/arm/boot/dts/am335x-bone.dts > > @@ -70,6 +70,8 @@ > > }; > > > > ldo3_reg: regulator@5 { > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <3300000>; > > I think these min & max limits are regulator limits. Are these fields > required? Add details of these additions. AFAIK fine-tuned (board > specific) min/max limits should be add here(like mpu and core > regulator nodes) This is required as the mmc driver builds the ocr mask from the regulator range..and won't run without it. However, with the additional updates since 3.7-rc1 to the am33xx release dts support, this is already there so you won't see this hunk in v4. > > regulator-always-on; > > }; > > > > @@ -78,3 +80,7 @@ > > }; > > }; > > }; > > + > > +&mmc1 { > > + vmmc-supply = <&ldo3_reg>; > > +}; > > diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts > > index 185d632..d63fce8 100644 > > --- a/arch/arm/boot/dts/am335x-evm.dts > > +++ b/arch/arm/boot/dts/am335x-evm.dts > > @@ -114,7 +114,13 @@ > > }; > > > > vmmc_reg: regulator@12 { > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <3300000>; > > =same= as above. > > > regulator-always-on; > > }; > > }; > > }; > > + > > +&mmc1 { > > + vmmc-supply = <&vmmc_reg>; > > +}; > > diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi > > index ab9c78f..26a6af7 100644 > > --- a/arch/arm/boot/dts/am33xx.dtsi > > +++ b/arch/arm/boot/dts/am33xx.dtsi > > @@ -234,6 +234,33 @@ > > status = "disabled"; > > }; > > > > + mmc1: mmc@48060000 { > > + compatible = "ti,omap3-hsmmc"; > > + ti,hwmods = "mmc1"; > > + ti,dual-volt; > > + ti,needs-special-reset; > > + dmas = <&edma 24 > > + &edma 25>; > > + dma-names = "tx", "rx"; > > Add status = "disabled" here and "okay" in corresponding > .dts file yeah, I originally decided to avoid fixing non-dma related items, but I'll fix this up in v4 while I'm there...to match the other mmc nodes. > > + }; > > + > > + mmc2: mmc@481d8000 { > > + compatible = "ti,omap3-hsmmc"; > > + ti,hwmods = "mmc2"; > > + ti,needs-special-reset; > > + dmas = <&edma 2 > > + &edma 3>; > > + dma-names = "tx", "rx"; > > + status = "disabled"; > > + }; > > + > > + mmc3: mmc@47810000 { > > + compatible = "ti,omap3-hsmmc"; > > + ti,hwmods = "mmc3"; > > + ti,needs-special-reset; > > What about DMA resources for mmc3? DMA resources for mmc3 are "special" in that mmc3 (actually MMC2 due to the hwmod fortran style numbering) is on the crossbar. Since dmaengine has no concept of a mux in front of dmac channels, we handle our mux with h/w specific properties. What this means is that we can't hardcode DMA resources for mmc3 (MMC2) or any other peripheral that sits on the crossbar as they aren't a fixed EDMA channel. Since the only peripheral sitting on mmc3 (or any crossbar based DMA event) on one of the am33xx boards in wl12xx, I can't provide an example of how this is done within this series...as wl12xx has no DT support and can't be used. However, for testing, I did a simple gpio event driver using a GPIO instance on the crossbar. This purely an out-of-tree testing thing wired op on the BeagleBone but it looks like this: &edma { ti,edma-xbar-event-map = <32 12>; }; gpevt { compatible = "gpevt"; dmas = <&edma 12>; dma-names = "gpioevt"; gpio-evt = <&gpio3 2 0>; }; The first node adds a crossbar event mapping (application-specific) which maps GPIOEVT2 to EDMA channel 12 (an open channel with no fixed peripheral use. The gpevt device node then configures the board specific dma resources. I don't see any reason to configure board specific dma resources for a driver that can't use them until the driver is converted to DT...at that time it makes sense to add mmc3 dma support for the evm and evmsk dts files. -Matt > > + status = "disabled"; > > + }; > > + > > wdt2: wdt@44e35000 { > > compatible = "ti,omap3-wdt"; > > ti,hwmods = "wd_timer2"; > > -- > > 1.7.9.5 > > > > _______________________________________________ > > devicetree-discuss mailing list > > devicetree-discuss@lists.ozlabs.org > > https://lists.ozlabs.org/listinfo/devicetree-discuss > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index c634f87..5510979 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -70,6 +70,8 @@ }; ldo3_reg: regulator@5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; @@ -78,3 +80,7 @@ }; }; }; + +&mmc1 { + vmmc-supply = <&ldo3_reg>; +}; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 185d632..d63fce8 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -114,7 +114,13 @@ }; vmmc_reg: regulator@12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; }; }; + +&mmc1 { + vmmc-supply = <&vmmc_reg>; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index ab9c78f..26a6af7 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -234,6 +234,33 @@ status = "disabled"; }; + mmc1: mmc@48060000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + dmas = <&edma 24 + &edma 25>; + dma-names = "tx", "rx"; + }; + + mmc2: mmc@481d8000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + dmas = <&edma 2 + &edma 3>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mmc3: mmc@47810000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + status = "disabled"; + }; + wdt2: wdt@44e35000 { compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2";
Adds AM33XX MMC support for am335x-bone and am335x-evm. Signed-off-by: Matt Porter <mporter@ti.com> --- arch/arm/boot/dts/am335x-bone.dts | 6 ++++++ arch/arm/boot/dts/am335x-evm.dts | 6 ++++++ arch/arm/boot/dts/am33xx.dtsi | 27 +++++++++++++++++++++++++++ 3 files changed, 39 insertions(+)