| Message ID | 1350615088-14562-2-git-send-email-mporter@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Oct 19, 2012 at 3:51 AM, Matt Porter <mporter@ti.com> wrote: > Add a dmaengine API to retrieve per channel capabilities. > Currently, only channel ops and SG segment limitations are > implemented caps. > > The API is optionally implemented by drivers and when > unimplemented will return a NULL pointer. It is intended > to be executed after a channel has been requested and, if > the channel is intended to be used with slave SG transfers, > then it may only be called after dmaengine_slave_config() > has executed. The slave driver provides parameters such as > burst size and address width which may be necessary for > the dmaengine driver to use in order to properly return SG > segment limit caps. > > Suggested-by: Vinod Koul <vinod.koul@intel.com> > Signed-off-by: Matt Porter <mporter@ti.com> Looks okay to me. Minor comment below... > +/** > + * dma_get_channel_caps - flush pending transactions to HW > + * @chan: target DMA channel > + * @dir: direction of transfer > + * > + * Get the channel-specific capabilities. If the dmaengine > + * driver does not implement per channel capbilities then > + * NULL is returned. > + */ > +static inline struct dmaengine_chan_caps > +*dma_get_channel_caps(struct dma_chan *chan, enum dma_transfer_direction dir) Looks to me like the returned pointer be a const. Ditto for the callback prototype in the dma_device structure. > +{ > + if (chan->device->device_channel_caps) > + return chan->device->device_channel_caps(chan, dir); > + return NULL; > +} > + > enum dma_status dma_sync_wait(struct dma_chan *chan, dma_cookie_t cookie); > #ifdef CONFIG_DMA_ENGINE > enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx); > -- > 1.7.9.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/
On Fri, Oct 19, 2012 at 3:51 AM, Matt Porter <mporter@ti.com> wrote: > Add a dmaengine API to retrieve per channel capabilities. > Currently, only channel ops and SG segment limitations are > implemented caps. > > The API is optionally implemented by drivers and when > unimplemented will return a NULL pointer. It is intended > to be executed after a channel has been requested and, if > the channel is intended to be used with slave SG transfers, > then it may only be called after dmaengine_slave_config() > has executed. The slave driver provides parameters such as > burst size and address width which may be necessary for > the dmaengine driver to use in order to properly return SG > segment limit caps. > > Suggested-by: Vinod Koul <vinod.koul@intel.com> > Signed-off-by: Matt Porter <mporter@ti.com> > --- > include/linux/dmaengine.h | 52 +++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 52 insertions(+) > > diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h > index 11d9e25..0181887 100644 > --- a/include/linux/dmaengine.h > +++ b/include/linux/dmaengine.h > @@ -371,6 +371,38 @@ struct dma_slave_config { > unsigned int slave_id; > }; > > +enum dmaengine_apis { > + DMAENGINE_MEMCPY = 0x0001, > + DMAENGINE_XOR = 0x0002, > + DMAENGINE_XOR_VAL = 0x0004, > + DMAENGINE_PQ = 0x0008, > + DMAENGINE_PQ_VAL = 0x0010, > + DMAENGINE_MEMSET = 0x0020, > + DMAENGINE_SLAVE = 0x0040, > + DMAENGINE_CYCLIC = 0x0080, > + DMAENGINE_INTERLEAVED = 0x0100, > + DMAENGINE_SG = 0x0200, > +}; Actually, one more comment. Why the new enum? Why can't the dma_transaction_type enum be used directly along with dma_cap_mask_t? > + > +/* struct dmaengine_chan_caps - expose capability of a channel > + * Note: each channel can have same or different capabilities > + * > + * This primarily classifies capabilities into > + * a) APIs/ops supported > + * b) channel physical capabilities > + * > + * @ops: or'ed api capability > + * @seg_nr: maximum number of SG segments supported on a SG/SLAVE > + * channel (0 for no maximum or not a SG/SLAVE channel) > + * @seg_len: maximum length of SG segments supported on a SG/SLAVE > + * channel (0 for no maximum or not a SG/SLAVE channel) > + */ > +struct dmaengine_chan_caps { > + enum dmaengine_apis ops; > + int seg_nr; > + int seg_len; > +}; > + > static inline const char *dma_chan_name(struct dma_chan *chan) > { > return dev_name(&chan->dev->device); > @@ -534,6 +566,7 @@ struct dma_tx_state { > * struct with auxiliary transfer status information, otherwise the call > * will just return a simple status code > * @device_issue_pending: push pending transactions to hardware > + * @device_channel_caps: return the channel capabilities > */ > struct dma_device { > > @@ -602,6 +635,8 @@ struct dma_device { > dma_cookie_t cookie, > struct dma_tx_state *txstate); > void (*device_issue_pending)(struct dma_chan *chan); > + struct dmaengine_chan_caps *(*device_channel_caps)( > + struct dma_chan *chan, enum dma_transfer_direction direction); > }; > > static inline int dmaengine_device_control(struct dma_chan *chan, > @@ -969,6 +1004,23 @@ dma_set_tx_state(struct dma_tx_state *st, dma_cookie_t last, dma_cookie_t used, > } > } > > +/** > + * dma_get_channel_caps - flush pending transactions to HW > + * @chan: target DMA channel > + * @dir: direction of transfer > + * > + * Get the channel-specific capabilities. If the dmaengine > + * driver does not implement per channel capbilities then > + * NULL is returned. > + */ > +static inline struct dmaengine_chan_caps > +*dma_get_channel_caps(struct dma_chan *chan, enum dma_transfer_direction dir) > +{ > + if (chan->device->device_channel_caps) > + return chan->device->device_channel_caps(chan, dir); > + return NULL; > +} > + > enum dma_status dma_sync_wait(struct dma_chan *chan, dma_cookie_t cookie); > #ifdef CONFIG_DMA_ENGINE > enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx); > -- > 1.7.9.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/
On Thu, Oct 18, 2012 at 7:51 PM, Matt Porter <mporter@ti.com> wrote: > Add a dmaengine API to retrieve per channel capabilities. > Currently, only channel ops and SG segment limitations are > implemented caps. > > The API is optionally implemented by drivers and when > unimplemented will return a NULL pointer. It is intended > to be executed after a channel has been requested and, if > the channel is intended to be used with slave SG transfers, > then it may only be called after dmaengine_slave_config() > has executed. The slave driver provides parameters such as > burst size and address width which may be necessary for > the dmaengine driver to use in order to properly return SG > segment limit caps. > > Suggested-by: Vinod Koul <vinod.koul@intel.com> > Signed-off-by: Matt Porter <mporter@ti.com> > --- > include/linux/dmaengine.h | 52 +++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 52 insertions(+) > > diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h > index 11d9e25..0181887 100644 > --- a/include/linux/dmaengine.h > +++ b/include/linux/dmaengine.h > @@ -371,6 +371,38 @@ struct dma_slave_config { > unsigned int slave_id; > }; > > +enum dmaengine_apis { > + DMAENGINE_MEMCPY = 0x0001, > + DMAENGINE_XOR = 0x0002, > + DMAENGINE_XOR_VAL = 0x0004, > + DMAENGINE_PQ = 0x0008, > + DMAENGINE_PQ_VAL = 0x0010, > + DMAENGINE_MEMSET = 0x0020, > + DMAENGINE_SLAVE = 0x0040, > + DMAENGINE_CYCLIC = 0x0080, > + DMAENGINE_INTERLEAVED = 0x0100, > + DMAENGINE_SG = 0x0200, > +}; > + > +/* struct dmaengine_chan_caps - expose capability of a channel > + * Note: each channel can have same or different capabilities > + * > + * This primarily classifies capabilities into > + * a) APIs/ops supported > + * b) channel physical capabilities > + * > + * @ops: or'ed api capability > + * @seg_nr: maximum number of SG segments supported on a SG/SLAVE > + * channel (0 for no maximum or not a SG/SLAVE channel) > + * @seg_len: maximum length of SG segments supported on a SG/SLAVE > + * channel (0 for no maximum or not a SG/SLAVE channel) > + */ > +struct dmaengine_chan_caps { > + enum dmaengine_apis ops; > + int seg_nr; > + int seg_len; > +}; This makes sense for the potentially dynamic capability properties that get set after configuration, but why do we need the operation types here? They can be retrieved from the parent device. -- Dan -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, 2012-10-23 at 15:54 -0700, Dan Williams wrote: > > +struct dmaengine_chan_caps { > > + enum dmaengine_apis ops; > > + int seg_nr; > > + int seg_len; > > +}; > > This makes sense for the potentially dynamic capability properties > that get set after configuration, but why do we need the operation > types here? They can be retrieved from the parent device. I was thinking that each channel can have different capabilities. You can assign one channel for mempcy operations exclusively and some others for slave usage exclusively. I believe some h/w do have such assignment so would help in doing that.
On Tue, 2012-10-23 at 23:49 +0100, Grant Likely wrote: > > +enum dmaengine_apis { > > + DMAENGINE_MEMCPY = 0x0001, > > + DMAENGINE_XOR = 0x0002, > > + DMAENGINE_XOR_VAL = 0x0004, > > + DMAENGINE_PQ = 0x0008, > > + DMAENGINE_PQ_VAL = 0x0010, > > + DMAENGINE_MEMSET = 0x0020, > > + DMAENGINE_SLAVE = 0x0040, > > + DMAENGINE_CYCLIC = 0x0080, > > + DMAENGINE_INTERLEAVED = 0x0100, > > + DMAENGINE_SG = 0x0200, > > +}; > > Actually, one more comment. Why the new enum? Why can't the > dma_transaction_type enum be used directly along with dma_cap_mask_t? Some of the capabilities above are not there in dma_caps_t like DMA_SG. Also DMA_INTERRUPT and DMA_PRIVATE would not make much sense here. BUT would help to keep things simpler if have one definition which includes all.
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 11d9e25..0181887 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -371,6 +371,38 @@ struct dma_slave_config { unsigned int slave_id; }; +enum dmaengine_apis { + DMAENGINE_MEMCPY = 0x0001, + DMAENGINE_XOR = 0x0002, + DMAENGINE_XOR_VAL = 0x0004, + DMAENGINE_PQ = 0x0008, + DMAENGINE_PQ_VAL = 0x0010, + DMAENGINE_MEMSET = 0x0020, + DMAENGINE_SLAVE = 0x0040, + DMAENGINE_CYCLIC = 0x0080, + DMAENGINE_INTERLEAVED = 0x0100, + DMAENGINE_SG = 0x0200, +}; + +/* struct dmaengine_chan_caps - expose capability of a channel + * Note: each channel can have same or different capabilities + * + * This primarily classifies capabilities into + * a) APIs/ops supported + * b) channel physical capabilities + * + * @ops: or'ed api capability + * @seg_nr: maximum number of SG segments supported on a SG/SLAVE + * channel (0 for no maximum or not a SG/SLAVE channel) + * @seg_len: maximum length of SG segments supported on a SG/SLAVE + * channel (0 for no maximum or not a SG/SLAVE channel) + */ +struct dmaengine_chan_caps { + enum dmaengine_apis ops; + int seg_nr; + int seg_len; +}; + static inline const char *dma_chan_name(struct dma_chan *chan) { return dev_name(&chan->dev->device); @@ -534,6 +566,7 @@ struct dma_tx_state { * struct with auxiliary transfer status information, otherwise the call * will just return a simple status code * @device_issue_pending: push pending transactions to hardware + * @device_channel_caps: return the channel capabilities */ struct dma_device { @@ -602,6 +635,8 @@ struct dma_device { dma_cookie_t cookie, struct dma_tx_state *txstate); void (*device_issue_pending)(struct dma_chan *chan); + struct dmaengine_chan_caps *(*device_channel_caps)( + struct dma_chan *chan, enum dma_transfer_direction direction); }; static inline int dmaengine_device_control(struct dma_chan *chan, @@ -969,6 +1004,23 @@ dma_set_tx_state(struct dma_tx_state *st, dma_cookie_t last, dma_cookie_t used, } } +/** + * dma_get_channel_caps - flush pending transactions to HW + * @chan: target DMA channel + * @dir: direction of transfer + * + * Get the channel-specific capabilities. If the dmaengine + * driver does not implement per channel capbilities then + * NULL is returned. + */ +static inline struct dmaengine_chan_caps +*dma_get_channel_caps(struct dma_chan *chan, enum dma_transfer_direction dir) +{ + if (chan->device->device_channel_caps) + return chan->device->device_channel_caps(chan, dir); + return NULL; +} + enum dma_status dma_sync_wait(struct dma_chan *chan, dma_cookie_t cookie); #ifdef CONFIG_DMA_ENGINE enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx);
Add a dmaengine API to retrieve per channel capabilities. Currently, only channel ops and SG segment limitations are implemented caps. The API is optionally implemented by drivers and when unimplemented will return a NULL pointer. It is intended to be executed after a channel has been requested and, if the channel is intended to be used with slave SG transfers, then it may only be called after dmaengine_slave_config() has executed. The slave driver provides parameters such as burst size and address width which may be necessary for the dmaengine driver to use in order to properly return SG segment limit caps. Suggested-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Matt Porter <mporter@ti.com> --- include/linux/dmaengine.h | 52 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+)