diff mbox

[2/6] mmc: sdhci-esdhc-imx: manually reset MIX_CTRL for usdhc

Message ID 1358766149-9534-3-git-send-email-shawn.guo@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Shawn Guo Jan. 21, 2013, 11:02 a.m. UTC 
It's another violation to SDHC spec that software reset on usdhc
does not reset MIX_CTRL register.  Have to do it manually, otherwise
the preserving of the register bits (e.g. AC23EN) may cause mmc card
fail to be initialized.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/mmc/host/sdhci-esdhc-imx.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 48832c5..968a70f 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -318,8 +318,15 @@  static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
 	 * circuit relies on.  To work around it, we turn the clocks on back
 	 * to keep card detection circuit functional.
 	 */
-	if ((reg == SDHCI_SOFTWARE_RESET) && (val & 1))
+	if ((reg == SDHCI_SOFTWARE_RESET) && (val & 1)) {
 		esdhc_clrset_le(host, 0x7, 0x7, ESDHC_SYSTEM_CONTROL);
+		/*
+		 * The reset on usdhc fails to clear MIX_CTRL register.
+		 * Do it manually here.
+		 */
+		if (is_imx6q_usdhc(imx_data))
+			writel(0, host->ioaddr + ESDHC_MIX_CTRL);
+	}
 }
 
 static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host)