new file mode 100644
@@ -0,0 +1,18 @@
+* SiRFprimII/marco/atlas6 SDHCI Controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-sirf driver.
+
+Required properties:
+- compatible: sirf,prima2-sdhc
+
+Optional properties:
+- cd-gpios: card detect gpio, with zero flags.
+
+Example:
+
+ sd0: sdhci@56000000 {
+ compatible = "sirf,prima2-sdhc";
+ reg = <0xcd000000 0x100000>;
+ cd-gpios = <&gpio 6 0>;
+ };
@@ -799,6 +799,7 @@ S: Maintained
F: arch/arm/mach-prima2/
F: drivers/dma/sirf-dma.c
F: drivers/i2c/busses/i2c-sirf.c
+F: drivers/mmc/host/sdhci-sirf.c
F: drivers/pinctrl/pinctrl-sirf.c
F: drivers/spi/spi-sirf.c
@@ -190,6 +190,17 @@ config MMC_SDHCI_S3C
If unsure, say N.
+config MMC_SDHCI_SIRF
+ tristate "SDHCI support on CSR SiRFprimaII and SiRFmarco SoCs"
+ depends on ARCH_SIRF
+ depends on MMC_SDHCI_PLTFM
+ help
+ This selects the SDHCI support for SiRF System-on-Chip devices.
+
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
+
config MMC_SDHCI_PXAV3
tristate "Marvell MMP2 SD Host Controller support (PXAV3)"
depends on CLKDEV_LOOKUP
@@ -13,6 +13,7 @@ obj-$(CONFIG_MMC_SDHCI_ACPI) += sdhci-acpi.o
obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o
obj-$(CONFIG_MMC_SDHCI_PXAV2) += sdhci-pxav2.o
obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o
+obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o
obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
new file mode 100644
@@ -0,0 +1,193 @@
+/*
+ * SDHCI support for SiRF primaII and marco SoCs
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/mmc/host.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/mmc/slot-gpio.h>
+#include <linux/pinctrl/consumer.h>
+#include "sdhci-pltfm.h"
+
+struct sdhci_sirf_priv {
+ struct clk *clk;
+ int gpio_cd;
+};
+
+static unsigned int sdhci_sirf_get_max_clk(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_sirf_priv *priv = pltfm_host->priv;
+ return clk_get_rate(priv->clk);
+}
+
+static struct sdhci_ops sdhci_sirf_ops = {
+ .get_max_clock = sdhci_sirf_get_max_clk,
+};
+
+static struct sdhci_pltfm_data sdhci_sirf_pdata = {
+ .ops = &sdhci_sirf_ops,
+ .quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
+ SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
+ SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
+ SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
+ SDHCI_QUIRK_DELAY_AFTER_POWER,
+};
+
+static int sdhci_sirf_probe(struct platform_device *pdev)
+{
+ struct sdhci_host *host;
+ struct sdhci_pltfm_host *pltfm_host;
+ struct sdhci_sirf_priv *priv;
+ struct pinctrl *pinctrl;
+ int ret;
+
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl)) {
+ dev_err(&pdev->dev, "unable to get pinmux");
+ return PTR_ERR(pinctrl);
+ }
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(struct sdhci_sirf_priv),
+ GFP_KERNEL);
+ if (!priv) {
+ dev_err(&pdev->dev, "unable to allocate private data");
+ return -ENOMEM;
+ }
+
+ priv->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(priv->clk)) {
+ dev_err(&pdev->dev, "unable to get clock");
+ return PTR_ERR(priv->clk);
+ }
+
+ if (pdev->dev.of_node) {
+ priv->gpio_cd = of_get_named_gpio(pdev->dev.of_node,
+ "cd-gpios", 0);
+ } else {
+ priv->gpio_cd = -EINVAL;
+ }
+
+ host = sdhci_pltfm_init(pdev, &sdhci_sirf_pdata);
+ if (IS_ERR(host)) {
+ ret = PTR_ERR(host);
+ goto err_sdhci_pltfm_init;
+ }
+
+ pltfm_host = sdhci_priv(host);
+ pltfm_host->priv = priv;
+
+ sdhci_get_of_property(pdev);
+
+ clk_prepare_enable(priv->clk);
+
+ ret = sdhci_add_host(host);
+ if (ret)
+ goto err_sdhci_add;
+
+ /*
+ * We must request the IRQ after sdhci_add_host(), as the tasklet only
+ * gets setup in sdhci_add_host() and we oops.
+ */
+ if (gpio_is_valid(priv->gpio_cd)) {
+ ret = mmc_gpio_request_cd(host->mmc, priv->gpio_cd);
+ if (ret) {
+ dev_err(&pdev->dev, "card detect irq request failed: %d\n",
+ ret);
+ goto err_request_cd;
+ }
+ }
+
+ return 0;
+
+err_request_cd:
+ sdhci_remove_host(host, 0);
+err_sdhci_add:
+ clk_disable_unprepare(priv->clk);
+ sdhci_pltfm_free(pdev);
+err_sdhci_pltfm_init:
+ return ret;
+}
+
+static int sdhci_sirf_remove(struct platform_device *pdev)
+{
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_sirf_priv *priv = pltfm_host->priv;
+
+ sdhci_pltfm_unregister(pdev);
+
+ if (gpio_is_valid(priv->gpio_cd))
+ mmc_gpio_free_cd(host->mmc);
+
+ clk_disable_unprepare(priv->clk);
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sdhci_sirf_suspend(struct device *dev)
+{
+ struct sdhci_host *host = dev_get_drvdata(dev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_sirf_priv *priv = pltfm_host->priv;
+ int ret;
+
+ ret = sdhci_suspend_host(host);
+ if (ret)
+ return ret;
+
+ clk_disable(priv->clk);
+
+ return 0;
+}
+
+static int sdhci_sirf_resume(struct device *dev)
+{
+ struct sdhci_host *host = dev_get_drvdata(dev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_sirf_priv *priv = pltfm_host->priv;
+ int ret;
+
+ ret = clk_enable(priv->clk);
+ if (ret) {
+ dev_dbg(dev, "Resume: Error enabling clock\n");
+ return ret;
+ }
+
+ return sdhci_resume_host(host);
+}
+
+static SIMPLE_DEV_PM_OPS(sdhci_sirf_pm_ops, sdhci_sirf_suspend, sdhci_sirf_resume);
+#endif
+
+static const struct of_device_id sdhci_sirf_of_match[] = {
+ { .compatible = "sirf,prima2-sdhc" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sdhci_sirf_of_match);
+
+static struct platform_driver sdhci_sirf_driver = {
+ .driver = {
+ .name = "sdhci-sirf",
+ .owner = THIS_MODULE,
+ .of_match_table = sdhci_sirf_of_match,
+#ifdef CONFIG_PM_SLEEP
+ .pm = &sdhci_sirf_pm_ops,
+#endif
+ },
+ .probe = sdhci_sirf_probe,
+ .remove = sdhci_sirf_remove,
+};
+
+module_platform_driver(sdhci_sirf_driver);
+
+MODULE_DESCRIPTION("SDHCI driver for SiRFprimaII/SiRFmarco");
+MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
+MODULE_LICENSE("GPL v2");