[v3,5/5] mmc: mxcmmc: enable DMA support on mpc512x

Commit Message

Anatolij Gustschin April 8, 2013, 9:28 p.m. UTC

Add SDHC DMA channel description to the mpc512x device
tree to enable slave channel requesting in the mxcmmc
driver.

mpc512x DMA engine doesn't support endianness conversion
when reading/writing data from peripheral's FIFO, so we
have to swap data buffers before each DMA write and after
each DMA read transfer manually.

Since chained SDHC DMA transfers are not supported on
mpc512x, limit 'max_segs' tunable parameter to one and
initialise it to 64 only when running on i.MX platforms.

Signed-off-by: Anatolij Gustschin <[e-mail]>
Acked-by: Sascha Hauer <[e-mail]>
---
v3:
 - change swapping function name to mxcmci_swap_buffers()
 - add Acked-by line

v2:
 - only rebased

 arch/powerpc/boot/dts/mpc5121.dtsi |    2 ++
 drivers/mmc/host/mxcmmc.c          |   35 +++++++++++++++++++++++++++++++++--
 2 files changed, 35 insertions(+), 2 deletions(-)

Patch

diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi
index 723e292..710aae6 100644
--- a/arch/powerpc/boot/dts/mpc5121.dtsi
+++ b/arch/powerpc/boot/dts/mpc5121.dtsi
@@ -152,6 +152,8 @@ 
 			compatible = "fsl,mpc5121-sdhc";
 			reg = <0x1500 0x100>;
 			interrupts = <8 0x8>;
+			dmas = <&dma0 30>;
+			dma-names = "rx-tx";
 		};
 
 		i2c@1700 {
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index 9b01acb..b937407 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -301,6 +301,29 @@  static void mxcmci_softreset(struct mxcmci_host *host)
 }
 static int mxcmci_setup_dma(struct mmc_host *mmc);
 
+#if IS_ENABLED(CONFIG_PPC_MPC512x)
+static inline void buffer_swap32(u32 *buf, int len)
+{
+	int i;
+
+	for (i = 0; i < ((len + 3) / 4); i++) {
+		st_le32(buf, *buf);
+		buf++;
+	}
+}
+
+static void mxcmci_swap_buffers(struct mmc_data *data)
+{
+	struct scatterlist *sg;
+	int i;
+
+	for_each_sg(data->sg, sg, data->sg_len, i)
+		buffer_swap32(sg_virt(sg), sg->length);
+}
+#else
+static inline void mxcmci_swap_buffers(struct mmc_data *data) {}
+#endif
+
 static int mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
 {
 	unsigned int nob = data->blocks;
@@ -336,6 +359,8 @@  static int mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
 	} else {
 		host->dma_dir = DMA_TO_DEVICE;
 		slave_dirn = DMA_MEM_TO_DEV;
+
+		mxcmci_swap_buffers(data);
 	}
 
 	nents = dma_map_sg(host->dma->device->dev, data->sg,
@@ -461,9 +486,11 @@  static int mxcmci_finish_data(struct mxcmci_host *host, unsigned int stat)
 	struct mmc_data *data = host->data;
 	int data_error;
 
-	if (mxcmci_use_dma(host))
+	if (mxcmci_use_dma(host)) {
 		dma_unmap_sg(host->dma->device->dev, data->sg, data->sg_len,
 				host->dma_dir);
+		mxcmci_swap_buffers(data);
+	}
 
 	if (stat & STATUS_ERR_MASK) {
 		dev_dbg(mmc_dev(host->mmc), "request failed. status: 0x%08x\n",
@@ -1050,7 +1077,6 @@  static int mxcmci_probe(struct platform_device *pdev)
 		mmc->caps |= MMC_CAP_SDIO_IRQ;
 
 	/* MMC core transfer sizes tunable parameters */
-	mmc->max_segs = 64;
 	mmc->max_blk_size = 2048;
 	mmc->max_blk_count = 65535;
 	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
@@ -1069,6 +1095,11 @@  static int mxcmci_probe(struct platform_device *pdev)
 	} else {
 		host->devtype = pdev->id_entry->driver_data;
 	}
+
+	/* adjust max_segs after devtype detection */
+	if (!is_mpc512x_mmc(host))
+		mmc->max_segs = 64;
+
 	host->mmc = mmc;
 	host->pdata = pdata;
 	spin_lock_init(&host->lock);