@@ -58,6 +58,8 @@ static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
#ifdef CONFIG_PM_RUNTIME
static int sdhci_runtime_pm_get(struct sdhci_host *host);
static int sdhci_runtime_pm_put(struct sdhci_host *host);
+static void sdhci_runtime_pm_bus_on(struct sdhci_host *host);
+static void sdhci_runtime_pm_bus_off(struct sdhci_host *host);
#else
static inline int sdhci_runtime_pm_get(struct sdhci_host *host)
{
@@ -67,6 +69,12 @@ static inline int sdhci_runtime_pm_put(struct sdhci_host *host)
{
return 0;
}
+static void sdhci_runtime_pm_bus_on(struct sdhci_host *host)
+{
+}
+static void sdhci_runtime_pm_bus_off(struct sdhci_host *host)
+{
+}
#endif
static void sdhci_dumpregs(struct sdhci_host *host)
@@ -192,8 +200,12 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask)
sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
- if (mask & SDHCI_RESET_ALL)
+ if (mask & SDHCI_RESET_ALL) {
host->clock = 0;
+ /* Reset-all turns off SD Bus Power */
+ if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
+ sdhci_runtime_pm_bus_off(host);
+ }
/* Wait max 100 ms */
timeout = 100;
@@ -1268,6 +1280,8 @@ static int sdhci_set_power(struct sdhci_host *host, unsigned short power)
if (pwr == 0) {
sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
+ if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
+ sdhci_runtime_pm_bus_off(host);
return 0;
}
@@ -1289,6 +1303,9 @@ static int sdhci_set_power(struct sdhci_host *host, unsigned short power)
sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+ if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
+ sdhci_runtime_pm_bus_on(host);
+
/*
* Some controllers need an extra 10ms delay of 10ms before they
* can apply clock after applying power
@@ -2625,6 +2642,22 @@ static int sdhci_runtime_pm_put(struct sdhci_host *host)
return pm_runtime_put_autosuspend(host->mmc->parent);
}
+static void sdhci_runtime_pm_bus_on(struct sdhci_host *host)
+{
+ if (host->runtime_suspended || host->bus_on)
+ return;
+ host->bus_on = true;
+ pm_runtime_get_noresume(host->mmc->parent);
+}
+
+static void sdhci_runtime_pm_bus_off(struct sdhci_host *host)
+{
+ if (host->runtime_suspended || !host->bus_on)
+ return;
+ host->bus_on = false;
+ pm_runtime_put_noidle(host->mmc->parent);
+}
+
int sdhci_runtime_suspend_host(struct sdhci_host *host)
{
unsigned long flags;
@@ -95,6 +95,7 @@ struct sdhci_host {
/* The system physically doesn't support 1.8v, even if the host does */
#define SDHCI_QUIRK2_NO_1_8_V (1<<2)
#define SDHCI_QUIRK2_PRESET_VALUE_BROKEN (1<<3)
+#define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON (1<<4)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
@@ -139,6 +140,7 @@ struct sdhci_host {
u8 pwr; /* Current voltage */
bool runtime_suspended; /* Host is runtime suspended */
+ bool bus_on; /* Bus power prevents runtime suspend */
struct mmc_request *mrq; /* Current request */
struct mmc_command *cmd; /* Current command */
If card power is dependent on SD bus power then the host controller must not be runtime suspended while the card is powered up. Add the ability to stay runtime-resumed in that case and enable it with a new quirk SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> --- drivers/mmc/host/sdhci.c | 35 ++++++++++++++++++++++++++++++++++- include/linux/mmc/sdhci.h | 2 ++ 2 files changed, 36 insertions(+), 1 deletion(-)