| Message ID | 1379070698-7344-10-git-send-email-b29396@freescale.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Sep 13, 2013 at 07:11:38PM +0800, Dong Aisheng wrote: > This is needed for supporting ultra high speed cards like SD3.0 cards. > > Signed-off-by: Dong Aisheng <b29396@freescale.com> > --- > arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 5 ++++- > arch/arm/boot/dts/imx6qdl.dtsi | 30 ++++++++++++++++++++++++++++++ > 2 files changed, 34 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi > index 1cbbc51..ff6f1e8 100644 > --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi > +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi > @@ -54,6 +54,7 @@ > fsl,pins = < > MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000 > MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x80000000 > + MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059 > >; > }; > }; > @@ -74,8 +75,10 @@ > }; > > &usdhc3 { > - pinctrl-names = "default"; > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > pinctrl-0 = <&pinctrl_usdhc3_1>; > + pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>; > + pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>; > cd-gpios = <&gpio6 15 0>; > wp-gpios = <&gpio1 13 0>; > status = "okay"; > diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi > index ccd55c2..cb17574 100644 > --- a/arch/arm/boot/dts/imx6qdl.dtsi > +++ b/arch/arm/boot/dts/imx6qdl.dtsi > @@ -1184,6 +1184,36 @@ > >; > }; > > + pinctrl_usdhc3_1_100mhz: usdhc3grp-1-100mhz { /* 100Mhz */ > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B9 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B9 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B9 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B9 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B9 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B9 > + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170B9 > + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170B9 > + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170B9 > + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170B9 I commented in the previous review that we use lowercase for hex values in device tree. It seems that you missed the comment. Since this patch can be applied independently, I just fixed them up and applied it. Shawn > + >; > + }; > + > + pinctrl_usdhc3_1_200mhz: usdhc3grp-1-200mhz { /* 200Mhz */ > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9 > + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170F9 > + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170F9 > + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170F9 > + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170F9 > + >; > + }; > + > pinctrl_usdhc3_2: usdhc3grp-2 { > fsl,pins = < > MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 > -- > 1.7.1 > > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 1cbbc51..ff6f1e8 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -54,6 +54,7 @@ fsl,pins = < MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000 MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x80000000 + MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059 >; }; }; @@ -74,8 +75,10 @@ }; &usdhc3 { - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3_1>; + pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>; cd-gpios = <&gpio6 15 0>; wp-gpios = <&gpio1 13 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index ccd55c2..cb17574 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -1184,6 +1184,36 @@ >; }; + pinctrl_usdhc3_1_100mhz: usdhc3grp-1-100mhz { /* 100Mhz */ + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B9 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170B9 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170B9 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170B9 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170B9 + >; + }; + + pinctrl_usdhc3_1_200mhz: usdhc3grp-1-200mhz { /* 200Mhz */ + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170F9 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170F9 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170F9 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170F9 + >; + }; + pinctrl_usdhc3_2: usdhc3grp-2 { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
This is needed for supporting ultra high speed cards like SD3.0 cards. Signed-off-by: Dong Aisheng <b29396@freescale.com> --- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 5 ++++- arch/arm/boot/dts/imx6qdl.dtsi | 30 ++++++++++++++++++++++++++++++ 2 files changed, 34 insertions(+), 1 deletions(-)