| Message ID | 1379718260-24349-1-git-send-email-csd@broadcom.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Sep 20, 2013 at 4:04 PM, Christian Daudt <csd@broadcom.com> wrote: > Currently ARCH_BCM has been used for Broadcom > Mobile V7 based SoCs. In order to allow other Broadcom > SoCs to also use mach-bcm directory and files, this patch > renames the original ARCH_BCM to ARCH_BCM_MOBILE, and > uses ARCH_BCM to define any Broadcom chip residing > in mach-bcm directory. > > Signed-off-by: Christian Daudt <csd@broadcom.com> > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index cc0f1fb..dd00e22 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -42,8 +42,6 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb > dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb > > dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb > -dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \ > - bcm28155-ap.dtb > dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ > da850-evm.dtb > dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ > @@ -101,6 +99,8 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ > kirkwood-ts219-6282.dtb \ > kirkwood-openblocks_a6.dtb > dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb > +dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm11351-brt.dtb \ > + bcm28155-ap.dtb This reordering looks off. The entries should be alphabetically ordered, so if anything it should move up above BCM2835. > diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile > index 704d6d3..4207ab4 100644 > --- a/drivers/clocksource/Makefile > +++ b/drivers/clocksource/Makefile > @@ -25,7 +25,7 @@ obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o > obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o > obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o > obj-$(CONFIG_ARCH_NSPIRE) += zevio-timer.o > -obj-$(CONFIG_ARCH_BCM) += bcm_kona_timer.o > +obj-$(CONFIG_ARCH_BCM_MOBILE) += bcm_kona_timer.o > obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence_ttc_timer.o > obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o > obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig > index 7fc5099..7e89650 100644 > --- a/drivers/mmc/host/Kconfig > +++ b/drivers/mmc/host/Kconfig > @@ -251,7 +251,7 @@ config MMC_SDHCI_S3C_DMA > > config MMC_SDHCI_BCM_KONA > tristate "SDHCI support on Broadcom KONA platform" > - depends on ARCH_BCM > + depends on ARCH_BCM_MOBILE > select MMC_SDHCI_PLTFM > help > This selects the Broadcom Kona Secure Digital Host Controller Since nothing breaks (i.e. ARCH_BCM is still there, and will be enabled for any ARCH_BCM_MOBILE platform), the above two can go through the corresponding subsystem trees as separate patches. With the above fixed: Acked-by: Olof Johansson <olof@lixom.net> -Olof -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[plain-text resend] On Fri, Sep 20, 2013 at 5:23 PM, Olof Johansson <olof@lixom.net> wrote: > > On Fri, Sep 20, 2013 at 4:04 PM, Christian Daudt <csd@broadcom.com> wrote: > > Currently ARCH_BCM has been used for Broadcom > > Mobile V7 based SoCs. In order to allow other Broadcom > > SoCs to also use mach-bcm directory and files, this patch > > renames the original ARCH_BCM to ARCH_BCM_MOBILE, and > > uses ARCH_BCM to define any Broadcom chip residing > > in mach-bcm directory. > > > > Signed-off-by: Christian Daudt <csd@broadcom.com> > > > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > > index cc0f1fb..dd00e22 100644 > > --- a/arch/arm/boot/dts/Makefile > > +++ b/arch/arm/boot/dts/Makefile > > @@ -42,8 +42,6 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb > > dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb > > > > dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb > > -dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \ > > - bcm28155-ap.dtb > > dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ > > da850-evm.dtb > > dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ > > @@ -101,6 +99,8 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ > > kirkwood-ts219-6282.dtb \ > > kirkwood-openblocks_a6.dtb > > dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb > > +dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm11351-brt.dtb \ > > + bcm28155-ap.dtb > > This reordering looks off. The entries should be alphabetically > ordered, so if anything it should move up above BCM2835. Heh. I started the rename with ARCH_MOBiLE_BCM and later renamed to ARCH_BCM_MOBILE. Forgot to move it up to reflect the change in ordering. Fixed. > > > > > diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile > > index 704d6d3..4207ab4 100644 > > --- a/drivers/clocksource/Makefile > > +++ b/drivers/clocksource/Makefile > > @@ -25,7 +25,7 @@ obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o > > obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o > > obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o > > obj-$(CONFIG_ARCH_NSPIRE) += zevio-timer.o > > -obj-$(CONFIG_ARCH_BCM) += bcm_kona_timer.o > > +obj-$(CONFIG_ARCH_BCM_MOBILE) += bcm_kona_timer.o > > obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence_ttc_timer.o > > obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o > > obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o > > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig > > index 7fc5099..7e89650 100644 > > --- a/drivers/mmc/host/Kconfig > > +++ b/drivers/mmc/host/Kconfig > > @@ -251,7 +251,7 @@ config MMC_SDHCI_S3C_DMA > > > > config MMC_SDHCI_BCM_KONA > > tristate "SDHCI support on Broadcom KONA platform" > > - depends on ARCH_BCM > > + depends on ARCH_BCM_MOBILE > > select MMC_SDHCI_PLTFM > > help > > This selects the Broadcom Kona Secure Digital Host Controller > > Since nothing breaks (i.e. ARCH_BCM is still there, and will be > enabled for any ARCH_BCM_MOBILE platform), the above two can go > through the corresponding subsystem trees as separate patches. > I was thinking of doing that, but it will actually break if the changes to drivers show up before the changes to mach-bcm because the drivers will no longer be compiled. I'll split it and keep the nag-ometer set to high to ensure their inclusion then... Thanks, csd -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cc0f1fb..dd00e22 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -42,8 +42,6 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb -dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \ - bcm28155-ap.dtb dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ da850-evm.dtb dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ @@ -101,6 +99,8 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ kirkwood-ts219-6282.dtb \ kirkwood-openblocks_a6.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb +dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm11351-brt.dtb \ + bcm28155-ap.dtb dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ msm8960-cdp.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig index 6e49310..efb0132 100644 --- a/arch/arm/configs/bcm_defconfig +++ b/arch/arm/configs/bcm_defconfig @@ -27,6 +27,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y CONFIG_EFI_PARTITION=y CONFIG_ARCH_BCM=y +CONFIG_ARCH_BCM_MOBILE=y CONFIG_ARM_THUMBEE=y CONFIG_ARM_ERRATA_743622=y CONFIG_PREEMPT=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 6e572c6..89a5064 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -6,6 +6,7 @@ CONFIG_ARCH_MVEBU=y CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_XP=y CONFIG_ARCH_BCM=y +CONFIG_ARCH_BCM_MOBILE=y CONFIG_GPIO_PCA953X=y CONFIG_ARCH_HIGHBANK=y CONFIG_ARCH_KEYSTONE=y diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 69d67f7..af86cda 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -1,5 +1,17 @@ config ARCH_BCM - bool "Broadcom SoC" if ARCH_MULTI_V7 + bool "Broadcom SoC Support" + select ARCH_MULTIPLATFORM + help + This enables support for Broadcom ARM based SoC + chips + +if ARCH_BCM + +menu "Broadcom SoC Selection" + +config ARCH_BCM_MOBILE + bool "Broadcom Mobile SoC" if ARCH_MULTI_V7 + default y depends on MMU select ARCH_REQUIRE_GPIOLIB select ARM_ERRATA_754322 @@ -14,7 +26,11 @@ config ARCH_BCM select TICK_ONESHOT select CACHE_L2X0 help - This enables support for system based on Broadcom SoCs. + This enables support for systems based on Broadcom mobile SoCs. It currently supports the 'BCM281XX' family, which includes BCM11130, BCM11140, BCM11351, BCM28145 and BCM28155 variants. + +endmenu + +endif diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index e3d0303..c2ccd5a 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -10,6 +10,6 @@ # of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. -obj-$(CONFIG_ARCH_BCM) := board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o +obj-$(CONFIG_ARCH_BCM_MOBILE) := board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_bcm_kona_smc_asm.o :=-Wa,-march=armv7-a$(plus_sec) diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 704d6d3..4207ab4 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -25,7 +25,7 @@ obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o obj-$(CONFIG_ARCH_NSPIRE) += zevio-timer.o -obj-$(CONFIG_ARCH_BCM) += bcm_kona_timer.o +obj-$(CONFIG_ARCH_BCM_MOBILE) += bcm_kona_timer.o obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence_ttc_timer.o obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 7fc5099..7e89650 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -251,7 +251,7 @@ config MMC_SDHCI_S3C_DMA config MMC_SDHCI_BCM_KONA tristate "SDHCI support on Broadcom KONA platform" - depends on ARCH_BCM + depends on ARCH_BCM_MOBILE select MMC_SDHCI_PLTFM help This selects the Broadcom Kona Secure Digital Host Controller
Currently ARCH_BCM has been used for Broadcom Mobile V7 based SoCs. In order to allow other Broadcom SoCs to also use mach-bcm directory and files, this patch renames the original ARCH_BCM to ARCH_BCM_MOBILE, and uses ARCH_BCM to define any Broadcom chip residing in mach-bcm directory. Signed-off-by: Christian Daudt <csd@broadcom.com>