| Message ID | 1381317616-1229-3-git-send-email-b29396@freescale.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Wolfram's email address is changed to Wolfram Sang <wsa@the-dreams.de>. On Wed, Oct 09, 2013 at 07:20:08PM +0800, Dong Aisheng wrote: > The mx6sl supports standard sdhci tuning, then esdhc_executing_tuning > is only needed for mx6q/dl. We introduce is_imx6_usdhc() and > is_imx6sl_usdhc() to handle the difference. This is clumsy and less future proof. I sent a series with you on copy to use a new approach for defining features and quirks among different esdhc variants. > The standard tuning is enabled by setting ESDHC_TUNE_CTRL_STD_TUNING_EN bit > in new register ESDHC_TUNE_CTRL and operates with new tuning bits > defined in SDHCI_ACMD12_ERR register. > > Note: mx6sl can also work on the old manually tuning mode as mx6q/dl if > not enable standard tuning mode. > > Signed-off-by: Dong Aisheng <b29396@freescale.com> > --- > drivers/mmc/host/sdhci-esdhc-imx.c | 108 +++++++++++++++++++++++++++--------- > 1 files changed, 82 insertions(+), 26 deletions(-) > > diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c > index b9899e9..2cce244 100644 > --- a/drivers/mmc/host/sdhci-esdhc-imx.c > +++ b/drivers/mmc/host/sdhci-esdhc-imx.c > @@ -51,6 +51,11 @@ > #define ESDHC_TUNE_CTRL_MIN 0 > #define ESDHC_TUNE_CTRL_MAX ((1 << 7) - 1) > > +#define ESDHC_TUNING_CTRL 0xCC Please follow the convention in this file to use lowercase for hex value. > +#define ESDHC_STD_TUNING_EN (1 << 24) > +/* NOTE: the minimum valid tuning start tap for mx6sl is 1 */ > +#define ESDHC_TUNING_START_TAP 0x1 > + > #define ESDHC_TUNING_BLOCK_PATTERN_LEN 64 > > /* pinctrl state */ > @@ -91,6 +96,7 @@ enum imx_esdhc_type { > IMX51_ESDHC, > IMX53_ESDHC, > IMX6Q_USDHC, > + IMX6SL_USDHC, > }; > > struct pltfm_imx_data { > @@ -130,6 +136,9 @@ static struct platform_device_id imx_esdhc_devtype[] = { > .name = "sdhci-usdhc-imx6q", > .driver_data = IMX6Q_USDHC, > }, { > + .name = "sdhci-usdhc-imx6sl", > + .driver_data = IMX6SL_USDHC, > + }, { > /* sentinel */ > } > }; > @@ -141,6 +150,7 @@ static const struct of_device_id imx_esdhc_dt_ids[] = { > { .compatible = "fsl,imx51-esdhc", .data = &imx_esdhc_devtype[IMX51_ESDHC], }, > { .compatible = "fsl,imx53-esdhc", .data = &imx_esdhc_devtype[IMX53_ESDHC], }, > { .compatible = "fsl,imx6q-usdhc", .data = &imx_esdhc_devtype[IMX6Q_USDHC], }, > + { .compatible = "fsl,imx6sl-usdhc", .data = &imx_esdhc_devtype[IMX6SL_USDHC], }, There are some attempts to get of_match_device() return the best match. http://thread.gmane.org/gmane.linux.kernel/1572529 But before the attempts succeed, we're suggested to sort the of_device_id table in driver from the specific to the generic. That said, if you put "fsl,imx6sl-usdhc" before "fsl,imx6q-usdhc", we do not need the changes in patch #3. Shawn > { /* sentinel */ } > }; > MODULE_DEVICE_TABLE(of, imx_esdhc_dt_ids); > @@ -170,6 +180,17 @@ static inline int is_imx6q_usdhc(struct pltfm_imx_data *data) > return data->devtype == IMX6Q_USDHC; > } > > +static inline int is_imx6sl_usdhc(struct pltfm_imx_data *data) > +{ > + return data->devtype == IMX6SL_USDHC; > +} > + > +static inline int is_imx6_usdhc(struct pltfm_imx_data *data) > +{ > + return (data->devtype == IMX6Q_USDHC) || > + (data->devtype == IMX6SL_USDHC); > +} > + > static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg) > { > void __iomem *base = host->ioaddr + (reg & ~0x3); > @@ -208,11 +229,16 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg) > } > } > > - if (unlikely(reg == SDHCI_CAPABILITIES_1) && is_imx6q_usdhc(imx_data)) > - val = SDHCI_SUPPORT_DDR50 | SDHCI_SUPPORT_SDR104 > - | SDHCI_SUPPORT_SDR50; > + if (unlikely(reg == SDHCI_CAPABILITIES_1)) { > + if (is_imx6q_usdhc(imx_data)) > + /* imx6q/dl does not have cap_1 register, fake one */ > + val = SDHCI_SUPPORT_DDR50 | SDHCI_SUPPORT_SDR104 > + | SDHCI_SUPPORT_SDR50; > + else if (is_imx6sl_usdhc(imx_data)) > + val = readl(host->ioaddr + SDHCI_CAPABILITIES) & 0xFFFF; > + } > > - if (unlikely(reg == SDHCI_MAX_CURRENT) && is_imx6q_usdhc(imx_data)) { > + if (unlikely(reg == SDHCI_MAX_CURRENT) && is_imx6_usdhc(imx_data)) { > val = 0; > val |= 0xFF << SDHCI_MAX_CURRENT_330_SHIFT; > val |= 0xFF << SDHCI_MAX_CURRENT_300_SHIFT; > @@ -316,13 +342,16 @@ static u16 esdhc_readw_le(struct sdhci_host *host, int reg) > if (val & ESDHC_VENDOR_SPEC_VSELECT) > ret |= SDHCI_CTRL_VDD_180; > > - if (is_imx6q_usdhc(imx_data)) { > + if (is_imx6q_usdhc(imx_data)) > val = readl(host->ioaddr + ESDHC_MIX_CTRL); > - if (val & ESDHC_MIX_CTRL_EXE_TUNE) > - ret |= SDHCI_CTRL_EXEC_TUNING; > - if (val & ESDHC_MIX_CTRL_SMPCLK_SEL) > - ret |= SDHCI_CTRL_TUNED_CLK; > - } > + else if (is_imx6sl_usdhc(imx_data)) > + /* the std tuning bits is in ACMD12_ERR for imx6sl */ > + val = readl(host->ioaddr + SDHCI_ACMD12_ERR); > + > + if (val & ESDHC_MIX_CTRL_EXE_TUNE) > + ret |= SDHCI_CTRL_EXEC_TUNING; > + if (val & ESDHC_MIX_CTRL_SMPCLK_SEL) > + ret |= SDHCI_CTRL_TUNED_CLK; > > ret |= (imx_data->uhs_mode & SDHCI_CTRL_UHS_MASK); > ret &= ~SDHCI_CTRL_PRESET_VAL_ENABLE; > @@ -356,12 +385,37 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) > new_val &= ~ESDHC_VENDOR_SPEC_VSELECT; > writel(new_val, host->ioaddr + ESDHC_VENDOR_SPEC); > imx_data->uhs_mode = val & SDHCI_CTRL_UHS_MASK; > - new_val = readl(host->ioaddr + ESDHC_MIX_CTRL); > - if (val & SDHCI_CTRL_TUNED_CLK) > - new_val |= ESDHC_MIX_CTRL_SMPCLK_SEL; > - else > - new_val &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; > - writel(new_val , host->ioaddr + ESDHC_MIX_CTRL); > + if (is_imx6q_usdhc(imx_data)) { > + new_val = readl(host->ioaddr + ESDHC_MIX_CTRL); > + if (val & SDHCI_CTRL_TUNED_CLK) > + new_val |= ESDHC_MIX_CTRL_SMPCLK_SEL; > + else > + new_val &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; > + writel(new_val , host->ioaddr + ESDHC_MIX_CTRL); > + } else if (is_imx6sl_usdhc(imx_data)) { > + u32 v = readl(host->ioaddr + SDHCI_ACMD12_ERR); > + u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL); > + new_val = readl(host->ioaddr + ESDHC_TUNING_CTRL); > + if (val & SDHCI_CTRL_EXEC_TUNING) { > + new_val |= ESDHC_STD_TUNING_EN | > + ESDHC_TUNING_START_TAP; > + v |= ESDHC_MIX_CTRL_EXE_TUNE; > + m |= ESDHC_MIX_CTRL_FBCLK_SEL; > + } else { > + new_val &= ~ESDHC_STD_TUNING_EN; > + v &= ~ESDHC_MIX_CTRL_EXE_TUNE; > + m &= ~ESDHC_MIX_CTRL_FBCLK_SEL; > + } > + > + if (val & SDHCI_CTRL_TUNED_CLK) > + v |= ESDHC_MIX_CTRL_SMPCLK_SEL; > + else > + v &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; > + > + writel(new_val, host->ioaddr + ESDHC_TUNING_CTRL); > + writel(v, host->ioaddr + SDHCI_ACMD12_ERR); > + writel(m, host->ioaddr + ESDHC_MIX_CTRL); > + } > return; > case SDHCI_TRANSFER_MODE: > if ((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT) > @@ -374,7 +428,7 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) > writel(v, host->ioaddr + ESDHC_VENDOR_SPEC); > } > > - if (is_imx6q_usdhc(imx_data)) { > + if (is_imx6_usdhc(imx_data)) { > u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL); > /* Swap AC23 bit */ > if (val & SDHCI_TRNS_AUTO_CMD23) { > @@ -399,7 +453,7 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) > (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) > imx_data->multiblock_status = MULTIBLK_IN_PROCESS; > > - if (is_imx6q_usdhc(imx_data)) > + if (is_imx6_usdhc(imx_data)) > writel(val << 16, > host->ioaddr + SDHCI_TRANSFER_MODE); > else > @@ -465,7 +519,7 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg) > * The reset on usdhc fails to clear MIX_CTRL register. > * Do it manually here. > */ > - if (is_imx6q_usdhc(imx_data)) > + if (is_imx6_usdhc(imx_data)) > writel(0, host->ioaddr + ESDHC_MIX_CTRL); > } > } > @@ -502,7 +556,7 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host, > u32 temp, val; > > if (clock == 0) { > - if (is_imx6q_usdhc(imx_data)) { > + if (is_imx6_usdhc(imx_data)) { > val = readl(host->ioaddr + ESDHC_VENDOR_SPEC); > writel(val & ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON, > host->ioaddr + ESDHC_VENDOR_SPEC); > @@ -510,7 +564,7 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host, > goto out; > } > > - if (is_imx6q_usdhc(imx_data)) > + if (is_imx6_usdhc(imx_data)) > pre_div = 1; > > temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); > @@ -537,7 +591,7 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host, > | (pre_div << ESDHC_PREDIV_SHIFT)); > sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); > > - if (is_imx6q_usdhc(imx_data)) { > + if (is_imx6_usdhc(imx_data)) { > val = readl(host->ioaddr + ESDHC_VENDOR_SPEC); > writel(val | ESDHC_VENDOR_SPEC_FRC_SDCLK_ON, > host->ioaddr + ESDHC_VENDOR_SPEC); > @@ -760,7 +814,7 @@ static int esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs) > return esdhc_change_pinstate(host, uhs); > } > > -static const struct sdhci_ops sdhci_esdhc_ops = { > +static struct sdhci_ops sdhci_esdhc_ops = { > .read_l = esdhc_readl_le, > .read_w = esdhc_readw_le, > .write_l = esdhc_writel_le, > @@ -772,7 +826,6 @@ static const struct sdhci_ops sdhci_esdhc_ops = { > .get_ro = esdhc_pltfm_get_ro, > .platform_bus_width = esdhc_pltfm_bus_width, > .set_uhs_signaling = esdhc_set_uhs_signaling, > - .platform_execute_tuning = esdhc_executing_tuning, > }; > > static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = { > @@ -909,9 +962,12 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) > * The imx6q ROM code will change the default watermark level setting > * to something insane. Change it back here. > */ > - if (is_imx6q_usdhc(imx_data)) > + if (is_imx6_usdhc(imx_data)) > writel(0x08100810, host->ioaddr + ESDHC_WTMK_LVL); > > + if (is_imx6q_usdhc(imx_data)) > + sdhci_esdhc_ops.platform_execute_tuning = > + esdhc_executing_tuning; > boarddata = &imx_data->boarddata; > if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) { > if (!host->mmc->parent->platform_data) { > @@ -972,7 +1028,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) > } > > /* sdr50 and sdr104 needs work on 1.8v signal voltage */ > - if ((boarddata->support_vsel) && is_imx6q_usdhc(imx_data)) { > + if ((boarddata->support_vsel) && is_imx6_usdhc(imx_data)) { > imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl, > ESDHC_PINCTRL_STATE_100MHZ); > imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl, > -- > 1.7.2.rc3 > > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Oct 15, 2013 at 03:18:28PM +0800, Shawn Guo wrote: > Wolfram's email address is changed to Wolfram Sang <wsa@the-dreams.de>. > Thanks for the forward. > On Wed, Oct 09, 2013 at 07:20:08PM +0800, Dong Aisheng wrote: > > The mx6sl supports standard sdhci tuning, then esdhc_executing_tuning > > is only needed for mx6q/dl. We introduce is_imx6_usdhc() and > > is_imx6sl_usdhc() to handle the difference. > > This is clumsy and less future proof. I sent a series with you on copy > to use a new approach for defining features and quirks among different > esdhc variants. > I just replied some concerns on the new approach in your patch series. Can't say it's suitable for usdhc to me. Please check it. > > The standard tuning is enabled by setting ESDHC_TUNE_CTRL_STD_TUNING_EN bit > > in new register ESDHC_TUNE_CTRL and operates with new tuning bits > > defined in SDHCI_ACMD12_ERR register. > > > > Note: mx6sl can also work on the old manually tuning mode as mx6q/dl if > > not enable standard tuning mode. > > > > Signed-off-by: Dong Aisheng <b29396@freescale.com> > > --- > > drivers/mmc/host/sdhci-esdhc-imx.c | 108 +++++++++++++++++++++++++++--------- > > 1 files changed, 82 insertions(+), 26 deletions(-) > > > > diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c > > index b9899e9..2cce244 100644 > > --- a/drivers/mmc/host/sdhci-esdhc-imx.c > > +++ b/drivers/mmc/host/sdhci-esdhc-imx.c > > @@ -51,6 +51,11 @@ > > #define ESDHC_TUNE_CTRL_MIN 0 > > #define ESDHC_TUNE_CTRL_MAX ((1 << 7) - 1) > > > > +#define ESDHC_TUNING_CTRL 0xCC > > Please follow the convention in this file to use lowercase for hex > value. > Got it. > > +#define ESDHC_STD_TUNING_EN (1 << 24) > > +/* NOTE: the minimum valid tuning start tap for mx6sl is 1 */ > > +#define ESDHC_TUNING_START_TAP 0x1 > > + > > #define ESDHC_TUNING_BLOCK_PATTERN_LEN 64 > > > > /* pinctrl state */ > > @@ -91,6 +96,7 @@ enum imx_esdhc_type { > > IMX51_ESDHC, > > IMX53_ESDHC, > > IMX6Q_USDHC, > > + IMX6SL_USDHC, > > }; > > > > struct pltfm_imx_data { > > @@ -130,6 +136,9 @@ static struct platform_device_id imx_esdhc_devtype[] = { > > .name = "sdhci-usdhc-imx6q", > > .driver_data = IMX6Q_USDHC, > > }, { > > + .name = "sdhci-usdhc-imx6sl", > > + .driver_data = IMX6SL_USDHC, > > + }, { > > /* sentinel */ > > } > > }; > > @@ -141,6 +150,7 @@ static const struct of_device_id imx_esdhc_dt_ids[] = { > > { .compatible = "fsl,imx51-esdhc", .data = &imx_esdhc_devtype[IMX51_ESDHC], }, > > { .compatible = "fsl,imx53-esdhc", .data = &imx_esdhc_devtype[IMX53_ESDHC], }, > > { .compatible = "fsl,imx6q-usdhc", .data = &imx_esdhc_devtype[IMX6Q_USDHC], }, > > + { .compatible = "fsl,imx6sl-usdhc", .data = &imx_esdhc_devtype[IMX6SL_USDHC], }, > > There are some attempts to get of_match_device() return the best match. > > http://thread.gmane.org/gmane.linux.kernel/1572529 > > But before the attempts succeed, we're suggested to sort the > of_device_id table in driver from the specific to the generic. That > said, if you put "fsl,imx6sl-usdhc" before "fsl,imx6q-usdhc", we do not > need the changes in patch #3. > Yes, i noticed that issue before and that how patch #3 comes out. If it's ok, i'm glad to put it before fsl,imx6q-usdhc. Regards Dong Aisheng > Shawn > > > { /* sentinel */ } > > }; > > MODULE_DEVICE_TABLE(of, imx_esdhc_dt_ids); > > @@ -170,6 +180,17 @@ static inline int is_imx6q_usdhc(struct pltfm_imx_data *data) > > return data->devtype == IMX6Q_USDHC; > > } > > > > +static inline int is_imx6sl_usdhc(struct pltfm_imx_data *data) > > +{ > > + return data->devtype == IMX6SL_USDHC; > > +} > > + > > +static inline int is_imx6_usdhc(struct pltfm_imx_data *data) > > +{ > > + return (data->devtype == IMX6Q_USDHC) || > > + (data->devtype == IMX6SL_USDHC); > > +} > > + > > static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg) > > { > > void __iomem *base = host->ioaddr + (reg & ~0x3); > > @@ -208,11 +229,16 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg) > > } > > } > > > > - if (unlikely(reg == SDHCI_CAPABILITIES_1) && is_imx6q_usdhc(imx_data)) > > - val = SDHCI_SUPPORT_DDR50 | SDHCI_SUPPORT_SDR104 > > - | SDHCI_SUPPORT_SDR50; > > + if (unlikely(reg == SDHCI_CAPABILITIES_1)) { > > + if (is_imx6q_usdhc(imx_data)) > > + /* imx6q/dl does not have cap_1 register, fake one */ > > + val = SDHCI_SUPPORT_DDR50 | SDHCI_SUPPORT_SDR104 > > + | SDHCI_SUPPORT_SDR50; > > + else if (is_imx6sl_usdhc(imx_data)) > > + val = readl(host->ioaddr + SDHCI_CAPABILITIES) & 0xFFFF; > > + } > > > > - if (unlikely(reg == SDHCI_MAX_CURRENT) && is_imx6q_usdhc(imx_data)) { > > + if (unlikely(reg == SDHCI_MAX_CURRENT) && is_imx6_usdhc(imx_data)) { > > val = 0; > > val |= 0xFF << SDHCI_MAX_CURRENT_330_SHIFT; > > val |= 0xFF << SDHCI_MAX_CURRENT_300_SHIFT; > > @@ -316,13 +342,16 @@ static u16 esdhc_readw_le(struct sdhci_host *host, int reg) > > if (val & ESDHC_VENDOR_SPEC_VSELECT) > > ret |= SDHCI_CTRL_VDD_180; > > > > - if (is_imx6q_usdhc(imx_data)) { > > + if (is_imx6q_usdhc(imx_data)) > > val = readl(host->ioaddr + ESDHC_MIX_CTRL); > > - if (val & ESDHC_MIX_CTRL_EXE_TUNE) > > - ret |= SDHCI_CTRL_EXEC_TUNING; > > - if (val & ESDHC_MIX_CTRL_SMPCLK_SEL) > > - ret |= SDHCI_CTRL_TUNED_CLK; > > - } > > + else if (is_imx6sl_usdhc(imx_data)) > > + /* the std tuning bits is in ACMD12_ERR for imx6sl */ > > + val = readl(host->ioaddr + SDHCI_ACMD12_ERR); > > + > > + if (val & ESDHC_MIX_CTRL_EXE_TUNE) > > + ret |= SDHCI_CTRL_EXEC_TUNING; > > + if (val & ESDHC_MIX_CTRL_SMPCLK_SEL) > > + ret |= SDHCI_CTRL_TUNED_CLK; > > > > ret |= (imx_data->uhs_mode & SDHCI_CTRL_UHS_MASK); > > ret &= ~SDHCI_CTRL_PRESET_VAL_ENABLE; > > @@ -356,12 +385,37 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) > > new_val &= ~ESDHC_VENDOR_SPEC_VSELECT; > > writel(new_val, host->ioaddr + ESDHC_VENDOR_SPEC); > > imx_data->uhs_mode = val & SDHCI_CTRL_UHS_MASK; > > - new_val = readl(host->ioaddr + ESDHC_MIX_CTRL); > > - if (val & SDHCI_CTRL_TUNED_CLK) > > - new_val |= ESDHC_MIX_CTRL_SMPCLK_SEL; > > - else > > - new_val &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; > > - writel(new_val , host->ioaddr + ESDHC_MIX_CTRL); > > + if (is_imx6q_usdhc(imx_data)) { > > + new_val = readl(host->ioaddr + ESDHC_MIX_CTRL); > > + if (val & SDHCI_CTRL_TUNED_CLK) > > + new_val |= ESDHC_MIX_CTRL_SMPCLK_SEL; > > + else > > + new_val &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; > > + writel(new_val , host->ioaddr + ESDHC_MIX_CTRL); > > + } else if (is_imx6sl_usdhc(imx_data)) { > > + u32 v = readl(host->ioaddr + SDHCI_ACMD12_ERR); > > + u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL); > > + new_val = readl(host->ioaddr + ESDHC_TUNING_CTRL); > > + if (val & SDHCI_CTRL_EXEC_TUNING) { > > + new_val |= ESDHC_STD_TUNING_EN | > > + ESDHC_TUNING_START_TAP; > > + v |= ESDHC_MIX_CTRL_EXE_TUNE; > > + m |= ESDHC_MIX_CTRL_FBCLK_SEL; > > + } else { > > + new_val &= ~ESDHC_STD_TUNING_EN; > > + v &= ~ESDHC_MIX_CTRL_EXE_TUNE; > > + m &= ~ESDHC_MIX_CTRL_FBCLK_SEL; > > + } > > + > > + if (val & SDHCI_CTRL_TUNED_CLK) > > + v |= ESDHC_MIX_CTRL_SMPCLK_SEL; > > + else > > + v &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; > > + > > + writel(new_val, host->ioaddr + ESDHC_TUNING_CTRL); > > + writel(v, host->ioaddr + SDHCI_ACMD12_ERR); > > + writel(m, host->ioaddr + ESDHC_MIX_CTRL); > > + } > > return; > > case SDHCI_TRANSFER_MODE: > > if ((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT) > > @@ -374,7 +428,7 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) > > writel(v, host->ioaddr + ESDHC_VENDOR_SPEC); > > } > > > > - if (is_imx6q_usdhc(imx_data)) { > > + if (is_imx6_usdhc(imx_data)) { > > u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL); > > /* Swap AC23 bit */ > > if (val & SDHCI_TRNS_AUTO_CMD23) { > > @@ -399,7 +453,7 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) > > (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) > > imx_data->multiblock_status = MULTIBLK_IN_PROCESS; > > > > - if (is_imx6q_usdhc(imx_data)) > > + if (is_imx6_usdhc(imx_data)) > > writel(val << 16, > > host->ioaddr + SDHCI_TRANSFER_MODE); > > else > > @@ -465,7 +519,7 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg) > > * The reset on usdhc fails to clear MIX_CTRL register. > > * Do it manually here. > > */ > > - if (is_imx6q_usdhc(imx_data)) > > + if (is_imx6_usdhc(imx_data)) > > writel(0, host->ioaddr + ESDHC_MIX_CTRL); > > } > > } > > @@ -502,7 +556,7 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host, > > u32 temp, val; > > > > if (clock == 0) { > > - if (is_imx6q_usdhc(imx_data)) { > > + if (is_imx6_usdhc(imx_data)) { > > val = readl(host->ioaddr + ESDHC_VENDOR_SPEC); > > writel(val & ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON, > > host->ioaddr + ESDHC_VENDOR_SPEC); > > @@ -510,7 +564,7 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host, > > goto out; > > } > > > > - if (is_imx6q_usdhc(imx_data)) > > + if (is_imx6_usdhc(imx_data)) > > pre_div = 1; > > > > temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); > > @@ -537,7 +591,7 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host, > > | (pre_div << ESDHC_PREDIV_SHIFT)); > > sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); > > > > - if (is_imx6q_usdhc(imx_data)) { > > + if (is_imx6_usdhc(imx_data)) { > > val = readl(host->ioaddr + ESDHC_VENDOR_SPEC); > > writel(val | ESDHC_VENDOR_SPEC_FRC_SDCLK_ON, > > host->ioaddr + ESDHC_VENDOR_SPEC); > > @@ -760,7 +814,7 @@ static int esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs) > > return esdhc_change_pinstate(host, uhs); > > } > > > > -static const struct sdhci_ops sdhci_esdhc_ops = { > > +static struct sdhci_ops sdhci_esdhc_ops = { > > .read_l = esdhc_readl_le, > > .read_w = esdhc_readw_le, > > .write_l = esdhc_writel_le, > > @@ -772,7 +826,6 @@ static const struct sdhci_ops sdhci_esdhc_ops = { > > .get_ro = esdhc_pltfm_get_ro, > > .platform_bus_width = esdhc_pltfm_bus_width, > > .set_uhs_signaling = esdhc_set_uhs_signaling, > > - .platform_execute_tuning = esdhc_executing_tuning, > > }; > > > > static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = { > > @@ -909,9 +962,12 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) > > * The imx6q ROM code will change the default watermark level setting > > * to something insane. Change it back here. > > */ > > - if (is_imx6q_usdhc(imx_data)) > > + if (is_imx6_usdhc(imx_data)) > > writel(0x08100810, host->ioaddr + ESDHC_WTMK_LVL); > > > > + if (is_imx6q_usdhc(imx_data)) > > + sdhci_esdhc_ops.platform_execute_tuning = > > + esdhc_executing_tuning; > > boarddata = &imx_data->boarddata; > > if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) { > > if (!host->mmc->parent->platform_data) { > > @@ -972,7 +1028,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) > > } > > > > /* sdr50 and sdr104 needs work on 1.8v signal voltage */ > > - if ((boarddata->support_vsel) && is_imx6q_usdhc(imx_data)) { > > + if ((boarddata->support_vsel) && is_imx6_usdhc(imx_data)) { > > imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl, > > ESDHC_PINCTRL_STATE_100MHZ); > > imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl, > > -- > > 1.7.2.rc3 > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index b9899e9..2cce244 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -51,6 +51,11 @@ #define ESDHC_TUNE_CTRL_MIN 0 #define ESDHC_TUNE_CTRL_MAX ((1 << 7) - 1) +#define ESDHC_TUNING_CTRL 0xCC +#define ESDHC_STD_TUNING_EN (1 << 24) +/* NOTE: the minimum valid tuning start tap for mx6sl is 1 */ +#define ESDHC_TUNING_START_TAP 0x1 + #define ESDHC_TUNING_BLOCK_PATTERN_LEN 64 /* pinctrl state */ @@ -91,6 +96,7 @@ enum imx_esdhc_type { IMX51_ESDHC, IMX53_ESDHC, IMX6Q_USDHC, + IMX6SL_USDHC, }; struct pltfm_imx_data { @@ -130,6 +136,9 @@ static struct platform_device_id imx_esdhc_devtype[] = { .name = "sdhci-usdhc-imx6q", .driver_data = IMX6Q_USDHC, }, { + .name = "sdhci-usdhc-imx6sl", + .driver_data = IMX6SL_USDHC, + }, { /* sentinel */ } }; @@ -141,6 +150,7 @@ static const struct of_device_id imx_esdhc_dt_ids[] = { { .compatible = "fsl,imx51-esdhc", .data = &imx_esdhc_devtype[IMX51_ESDHC], }, { .compatible = "fsl,imx53-esdhc", .data = &imx_esdhc_devtype[IMX53_ESDHC], }, { .compatible = "fsl,imx6q-usdhc", .data = &imx_esdhc_devtype[IMX6Q_USDHC], }, + { .compatible = "fsl,imx6sl-usdhc", .data = &imx_esdhc_devtype[IMX6SL_USDHC], }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, imx_esdhc_dt_ids); @@ -170,6 +180,17 @@ static inline int is_imx6q_usdhc(struct pltfm_imx_data *data) return data->devtype == IMX6Q_USDHC; } +static inline int is_imx6sl_usdhc(struct pltfm_imx_data *data) +{ + return data->devtype == IMX6SL_USDHC; +} + +static inline int is_imx6_usdhc(struct pltfm_imx_data *data) +{ + return (data->devtype == IMX6Q_USDHC) || + (data->devtype == IMX6SL_USDHC); +} + static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg) { void __iomem *base = host->ioaddr + (reg & ~0x3); @@ -208,11 +229,16 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg) } } - if (unlikely(reg == SDHCI_CAPABILITIES_1) && is_imx6q_usdhc(imx_data)) - val = SDHCI_SUPPORT_DDR50 | SDHCI_SUPPORT_SDR104 - | SDHCI_SUPPORT_SDR50; + if (unlikely(reg == SDHCI_CAPABILITIES_1)) { + if (is_imx6q_usdhc(imx_data)) + /* imx6q/dl does not have cap_1 register, fake one */ + val = SDHCI_SUPPORT_DDR50 | SDHCI_SUPPORT_SDR104 + | SDHCI_SUPPORT_SDR50; + else if (is_imx6sl_usdhc(imx_data)) + val = readl(host->ioaddr + SDHCI_CAPABILITIES) & 0xFFFF; + } - if (unlikely(reg == SDHCI_MAX_CURRENT) && is_imx6q_usdhc(imx_data)) { + if (unlikely(reg == SDHCI_MAX_CURRENT) && is_imx6_usdhc(imx_data)) { val = 0; val |= 0xFF << SDHCI_MAX_CURRENT_330_SHIFT; val |= 0xFF << SDHCI_MAX_CURRENT_300_SHIFT; @@ -316,13 +342,16 @@ static u16 esdhc_readw_le(struct sdhci_host *host, int reg) if (val & ESDHC_VENDOR_SPEC_VSELECT) ret |= SDHCI_CTRL_VDD_180; - if (is_imx6q_usdhc(imx_data)) { + if (is_imx6q_usdhc(imx_data)) val = readl(host->ioaddr + ESDHC_MIX_CTRL); - if (val & ESDHC_MIX_CTRL_EXE_TUNE) - ret |= SDHCI_CTRL_EXEC_TUNING; - if (val & ESDHC_MIX_CTRL_SMPCLK_SEL) - ret |= SDHCI_CTRL_TUNED_CLK; - } + else if (is_imx6sl_usdhc(imx_data)) + /* the std tuning bits is in ACMD12_ERR for imx6sl */ + val = readl(host->ioaddr + SDHCI_ACMD12_ERR); + + if (val & ESDHC_MIX_CTRL_EXE_TUNE) + ret |= SDHCI_CTRL_EXEC_TUNING; + if (val & ESDHC_MIX_CTRL_SMPCLK_SEL) + ret |= SDHCI_CTRL_TUNED_CLK; ret |= (imx_data->uhs_mode & SDHCI_CTRL_UHS_MASK); ret &= ~SDHCI_CTRL_PRESET_VAL_ENABLE; @@ -356,12 +385,37 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) new_val &= ~ESDHC_VENDOR_SPEC_VSELECT; writel(new_val, host->ioaddr + ESDHC_VENDOR_SPEC); imx_data->uhs_mode = val & SDHCI_CTRL_UHS_MASK; - new_val = readl(host->ioaddr + ESDHC_MIX_CTRL); - if (val & SDHCI_CTRL_TUNED_CLK) - new_val |= ESDHC_MIX_CTRL_SMPCLK_SEL; - else - new_val &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; - writel(new_val , host->ioaddr + ESDHC_MIX_CTRL); + if (is_imx6q_usdhc(imx_data)) { + new_val = readl(host->ioaddr + ESDHC_MIX_CTRL); + if (val & SDHCI_CTRL_TUNED_CLK) + new_val |= ESDHC_MIX_CTRL_SMPCLK_SEL; + else + new_val &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; + writel(new_val , host->ioaddr + ESDHC_MIX_CTRL); + } else if (is_imx6sl_usdhc(imx_data)) { + u32 v = readl(host->ioaddr + SDHCI_ACMD12_ERR); + u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL); + new_val = readl(host->ioaddr + ESDHC_TUNING_CTRL); + if (val & SDHCI_CTRL_EXEC_TUNING) { + new_val |= ESDHC_STD_TUNING_EN | + ESDHC_TUNING_START_TAP; + v |= ESDHC_MIX_CTRL_EXE_TUNE; + m |= ESDHC_MIX_CTRL_FBCLK_SEL; + } else { + new_val &= ~ESDHC_STD_TUNING_EN; + v &= ~ESDHC_MIX_CTRL_EXE_TUNE; + m &= ~ESDHC_MIX_CTRL_FBCLK_SEL; + } + + if (val & SDHCI_CTRL_TUNED_CLK) + v |= ESDHC_MIX_CTRL_SMPCLK_SEL; + else + v &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; + + writel(new_val, host->ioaddr + ESDHC_TUNING_CTRL); + writel(v, host->ioaddr + SDHCI_ACMD12_ERR); + writel(m, host->ioaddr + ESDHC_MIX_CTRL); + } return; case SDHCI_TRANSFER_MODE: if ((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT) @@ -374,7 +428,7 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) writel(v, host->ioaddr + ESDHC_VENDOR_SPEC); } - if (is_imx6q_usdhc(imx_data)) { + if (is_imx6_usdhc(imx_data)) { u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL); /* Swap AC23 bit */ if (val & SDHCI_TRNS_AUTO_CMD23) { @@ -399,7 +453,7 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) imx_data->multiblock_status = MULTIBLK_IN_PROCESS; - if (is_imx6q_usdhc(imx_data)) + if (is_imx6_usdhc(imx_data)) writel(val << 16, host->ioaddr + SDHCI_TRANSFER_MODE); else @@ -465,7 +519,7 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg) * The reset on usdhc fails to clear MIX_CTRL register. * Do it manually here. */ - if (is_imx6q_usdhc(imx_data)) + if (is_imx6_usdhc(imx_data)) writel(0, host->ioaddr + ESDHC_MIX_CTRL); } } @@ -502,7 +556,7 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host, u32 temp, val; if (clock == 0) { - if (is_imx6q_usdhc(imx_data)) { + if (is_imx6_usdhc(imx_data)) { val = readl(host->ioaddr + ESDHC_VENDOR_SPEC); writel(val & ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON, host->ioaddr + ESDHC_VENDOR_SPEC); @@ -510,7 +564,7 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host, goto out; } - if (is_imx6q_usdhc(imx_data)) + if (is_imx6_usdhc(imx_data)) pre_div = 1; temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); @@ -537,7 +591,7 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host, | (pre_div << ESDHC_PREDIV_SHIFT)); sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); - if (is_imx6q_usdhc(imx_data)) { + if (is_imx6_usdhc(imx_data)) { val = readl(host->ioaddr + ESDHC_VENDOR_SPEC); writel(val | ESDHC_VENDOR_SPEC_FRC_SDCLK_ON, host->ioaddr + ESDHC_VENDOR_SPEC); @@ -760,7 +814,7 @@ static int esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs) return esdhc_change_pinstate(host, uhs); } -static const struct sdhci_ops sdhci_esdhc_ops = { +static struct sdhci_ops sdhci_esdhc_ops = { .read_l = esdhc_readl_le, .read_w = esdhc_readw_le, .write_l = esdhc_writel_le, @@ -772,7 +826,6 @@ static const struct sdhci_ops sdhci_esdhc_ops = { .get_ro = esdhc_pltfm_get_ro, .platform_bus_width = esdhc_pltfm_bus_width, .set_uhs_signaling = esdhc_set_uhs_signaling, - .platform_execute_tuning = esdhc_executing_tuning, }; static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = { @@ -909,9 +962,12 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) * The imx6q ROM code will change the default watermark level setting * to something insane. Change it back here. */ - if (is_imx6q_usdhc(imx_data)) + if (is_imx6_usdhc(imx_data)) writel(0x08100810, host->ioaddr + ESDHC_WTMK_LVL); + if (is_imx6q_usdhc(imx_data)) + sdhci_esdhc_ops.platform_execute_tuning = + esdhc_executing_tuning; boarddata = &imx_data->boarddata; if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) { if (!host->mmc->parent->platform_data) { @@ -972,7 +1028,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) } /* sdr50 and sdr104 needs work on 1.8v signal voltage */ - if ((boarddata->support_vsel) && is_imx6q_usdhc(imx_data)) { + if ((boarddata->support_vsel) && is_imx6_usdhc(imx_data)) { imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl, ESDHC_PINCTRL_STATE_100MHZ); imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl,
The mx6sl supports standard sdhci tuning, then esdhc_executing_tuning is only needed for mx6q/dl. We introduce is_imx6_usdhc() and is_imx6sl_usdhc() to handle the difference. The standard tuning is enabled by setting ESDHC_TUNE_CTRL_STD_TUNING_EN bit in new register ESDHC_TUNE_CTRL and operates with new tuning bits defined in SDHCI_ACMD12_ERR register. Note: mx6sl can also work on the old manually tuning mode as mx6q/dl if not enable standard tuning mode. Signed-off-by: Dong Aisheng <b29396@freescale.com> --- drivers/mmc/host/sdhci-esdhc-imx.c | 108 +++++++++++++++++++++++++++--------- 1 files changed, 82 insertions(+), 26 deletions(-)