| Message ID | 1415975785-30303-2-git-send-email-ludovic.desroches@atmel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 14/11/2014 15:36, Ludovic Desroches : > Return probe defer if requesting a dma channel without a dma controller > probed. Using late_initcall is no more needing. > > Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> > --- > > Sorry for the noise, typo in cc list. > > drivers/mmc/host/atmel-mci.c | 52 +++++++++++++++++++++++++------------------- > 1 file changed, 30 insertions(+), 22 deletions(-) > > diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c > index de2287c..caddbbd 100644 > --- a/drivers/mmc/host/atmel-mci.c > +++ b/drivers/mmc/host/atmel-mci.c > @@ -2272,37 +2272,40 @@ static void atmci_cleanup_slot(struct atmel_mci_slot *slot, > mmc_free_host(slot->mmc); > } > > -static bool atmci_configure_dma(struct atmel_mci *host) > +static int atmci_configure_dma(struct atmel_mci *host) > { > struct mci_platform_data *pdata; > dma_cap_mask_t mask; > + int ret = 0; > > if (host == NULL) > - return false; > + return -EINVAL; > > pdata = host->pdev->dev.platform_data; > > dma_cap_zero(mask); > dma_cap_set(DMA_SLAVE, mask); > > - host->dma.chan = dma_request_slave_channel(&host->pdev->dev, "rxtx"); > - if (!host->dma.chan) { > - dev_warn(&host->pdev->dev, "no DMA channel available\n"); > - return false; > - } else { > - dev_info(&host->pdev->dev, > - "using %s for DMA transfers\n", > - dma_chan_name(host->dma.chan)); > - > - host->dma_conf.src_addr = host->mapbase + ATMCI_RDR; > - host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > - host->dma_conf.src_maxburst = 1; > - host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR; > - host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > - host->dma_conf.dst_maxburst = 1; > - host->dma_conf.device_fc = false; > - return true; > + host->dma.chan = dma_request_slave_channel_reason(&host->pdev->dev, "rxtx"); > + if (IS_ERR(host->dma.chan)) { > + ret = PTR_ERR(host->dma.chan); > + if (ret != -EPROBE_DEFER) > + dev_warn(&host->pdev->dev, "no DMA channel available\n"); > + return ret; > } > + > + dev_info(&host->pdev->dev, > + "using %s for DMA transfers\n", > + dma_chan_name(host->dma.chan)); > + > + host->dma_conf.src_addr = host->mapbase + ATMCI_RDR; > + host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > + host->dma_conf.src_maxburst = 1; > + host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR; > + host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > + host->dma_conf.dst_maxburst = 1; > + host->dma_conf.device_fc = false; > + return ret; > } > > /* > @@ -2419,7 +2422,10 @@ static int __init atmci_probe(struct platform_device *pdev) > > /* Get MCI capabilities and set operations according to it */ > atmci_get_cap(host); > - if (atmci_configure_dma(host)) { > + ret = atmci_configure_dma(host); > + if (ret == -EPROBE_DEFER) > + goto err_dma_probe_defer; > + if (ret == 0) { > host->prepare_data = &atmci_prepare_data_dma; > host->submit_data = &atmci_submit_data_dma; > host->stop_transfer = &atmci_stop_transfer_dma; > @@ -2506,6 +2512,7 @@ err_init_slot: > del_timer_sync(&host->timer); > if (host->dma.chan) > dma_release_channel(host->dma.chan); > +err_dma_probe_defer: > free_irq(irq, host); > return ret; > } > @@ -2573,6 +2580,7 @@ static const struct dev_pm_ops atmci_dev_pm_ops = { > }; > > static struct platform_driver atmci_driver = { > + .probe = atmci_probe, > .remove = __exit_p(atmci_remove), > .driver = { > .name = "atmel_mci", > @@ -2583,7 +2591,7 @@ static struct platform_driver atmci_driver = { > > static int __init atmci_init(void) > { > - return platform_driver_probe(&atmci_driver, atmci_probe); > + return platform_driver_register(&atmci_driver); > } > > static void __exit atmci_exit(void) > @@ -2591,7 +2599,7 @@ static void __exit atmci_exit(void) > platform_driver_unregister(&atmci_driver); > } > > -late_initcall(atmci_init); /* try to load after dma driver when built-in */ > +subsys_initcall(atmci_init); If deferring probe is activated, so I don't know why a special initcall function is still needed. > module_exit(atmci_exit); > > MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver"); >
On Fri, Nov 14, 2014 at 03:55:13PM +0100, Nicolas Ferre wrote: > On 14/11/2014 15:36, Ludovic Desroches : > > Return probe defer if requesting a dma channel without a dma controller > > probed. Using late_initcall is no more needing. > > > > Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> > > --- > > > > Sorry for the noise, typo in cc list. > > > > drivers/mmc/host/atmel-mci.c | 52 +++++++++++++++++++++++++------------------- > > 1 file changed, 30 insertions(+), 22 deletions(-) > > > > diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c > > index de2287c..caddbbd 100644 > > --- a/drivers/mmc/host/atmel-mci.c > > +++ b/drivers/mmc/host/atmel-mci.c > > @@ -2272,37 +2272,40 @@ static void atmci_cleanup_slot(struct atmel_mci_slot *slot, > > mmc_free_host(slot->mmc); > > } > > > > -static bool atmci_configure_dma(struct atmel_mci *host) > > +static int atmci_configure_dma(struct atmel_mci *host) > > { > > struct mci_platform_data *pdata; > > dma_cap_mask_t mask; > > + int ret = 0; > > > > if (host == NULL) > > - return false; > > + return -EINVAL; > > > > pdata = host->pdev->dev.platform_data; > > > > dma_cap_zero(mask); > > dma_cap_set(DMA_SLAVE, mask); > > > > - host->dma.chan = dma_request_slave_channel(&host->pdev->dev, "rxtx"); > > - if (!host->dma.chan) { > > - dev_warn(&host->pdev->dev, "no DMA channel available\n"); > > - return false; > > - } else { > > - dev_info(&host->pdev->dev, > > - "using %s for DMA transfers\n", > > - dma_chan_name(host->dma.chan)); > > - > > - host->dma_conf.src_addr = host->mapbase + ATMCI_RDR; > > - host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > > - host->dma_conf.src_maxburst = 1; > > - host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR; > > - host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > > - host->dma_conf.dst_maxburst = 1; > > - host->dma_conf.device_fc = false; > > - return true; > > + host->dma.chan = dma_request_slave_channel_reason(&host->pdev->dev, "rxtx"); > > + if (IS_ERR(host->dma.chan)) { > > + ret = PTR_ERR(host->dma.chan); > > + if (ret != -EPROBE_DEFER) > > + dev_warn(&host->pdev->dev, "no DMA channel available\n"); > > + return ret; > > } > > + > > + dev_info(&host->pdev->dev, > > + "using %s for DMA transfers\n", > > + dma_chan_name(host->dma.chan)); > > + > > + host->dma_conf.src_addr = host->mapbase + ATMCI_RDR; > > + host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > > + host->dma_conf.src_maxburst = 1; > > + host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR; > > + host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > > + host->dma_conf.dst_maxburst = 1; > > + host->dma_conf.device_fc = false; > > + return ret; > > } > > > > /* > > @@ -2419,7 +2422,10 @@ static int __init atmci_probe(struct platform_device *pdev) > > > > /* Get MCI capabilities and set operations according to it */ > > atmci_get_cap(host); > > - if (atmci_configure_dma(host)) { > > + ret = atmci_configure_dma(host); > > + if (ret == -EPROBE_DEFER) > > + goto err_dma_probe_defer; > > + if (ret == 0) { > > host->prepare_data = &atmci_prepare_data_dma; > > host->submit_data = &atmci_submit_data_dma; > > host->stop_transfer = &atmci_stop_transfer_dma; > > @@ -2506,6 +2512,7 @@ err_init_slot: > > del_timer_sync(&host->timer); > > if (host->dma.chan) > > dma_release_channel(host->dma.chan); > > +err_dma_probe_defer: > > free_irq(irq, host); > > return ret; > > } > > @@ -2573,6 +2580,7 @@ static const struct dev_pm_ops atmci_dev_pm_ops = { > > }; > > > > static struct platform_driver atmci_driver = { > > + .probe = atmci_probe, > > .remove = __exit_p(atmci_remove), > > .driver = { > > .name = "atmel_mci", > > @@ -2583,7 +2591,7 @@ static struct platform_driver atmci_driver = { > > > > static int __init atmci_init(void) > > { > > - return platform_driver_probe(&atmci_driver, atmci_probe); > > + return platform_driver_register(&atmci_driver); > > } > > > > static void __exit atmci_exit(void) > > @@ -2591,7 +2599,7 @@ static void __exit atmci_exit(void) > > platform_driver_unregister(&atmci_driver); > > } > > > > -late_initcall(atmci_init); /* try to load after dma driver when built-in */ > > +subsys_initcall(atmci_init); > > If deferring probe is activated, so I don't know why a special initcall > function is still needed. > Right, initcall is still a constraint I can remove, I'll replace it with module_platform_driver(). > > module_exit(atmci_exit); > > > > MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver"); > > Ludovic -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index de2287c..caddbbd 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -2272,37 +2272,40 @@ static void atmci_cleanup_slot(struct atmel_mci_slot *slot, mmc_free_host(slot->mmc); } -static bool atmci_configure_dma(struct atmel_mci *host) +static int atmci_configure_dma(struct atmel_mci *host) { struct mci_platform_data *pdata; dma_cap_mask_t mask; + int ret = 0; if (host == NULL) - return false; + return -EINVAL; pdata = host->pdev->dev.platform_data; dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - host->dma.chan = dma_request_slave_channel(&host->pdev->dev, "rxtx"); - if (!host->dma.chan) { - dev_warn(&host->pdev->dev, "no DMA channel available\n"); - return false; - } else { - dev_info(&host->pdev->dev, - "using %s for DMA transfers\n", - dma_chan_name(host->dma.chan)); - - host->dma_conf.src_addr = host->mapbase + ATMCI_RDR; - host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - host->dma_conf.src_maxburst = 1; - host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR; - host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - host->dma_conf.dst_maxburst = 1; - host->dma_conf.device_fc = false; - return true; + host->dma.chan = dma_request_slave_channel_reason(&host->pdev->dev, "rxtx"); + if (IS_ERR(host->dma.chan)) { + ret = PTR_ERR(host->dma.chan); + if (ret != -EPROBE_DEFER) + dev_warn(&host->pdev->dev, "no DMA channel available\n"); + return ret; } + + dev_info(&host->pdev->dev, + "using %s for DMA transfers\n", + dma_chan_name(host->dma.chan)); + + host->dma_conf.src_addr = host->mapbase + ATMCI_RDR; + host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + host->dma_conf.src_maxburst = 1; + host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR; + host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + host->dma_conf.dst_maxburst = 1; + host->dma_conf.device_fc = false; + return ret; } /* @@ -2419,7 +2422,10 @@ static int __init atmci_probe(struct platform_device *pdev) /* Get MCI capabilities and set operations according to it */ atmci_get_cap(host); - if (atmci_configure_dma(host)) { + ret = atmci_configure_dma(host); + if (ret == -EPROBE_DEFER) + goto err_dma_probe_defer; + if (ret == 0) { host->prepare_data = &atmci_prepare_data_dma; host->submit_data = &atmci_submit_data_dma; host->stop_transfer = &atmci_stop_transfer_dma; @@ -2506,6 +2512,7 @@ err_init_slot: del_timer_sync(&host->timer); if (host->dma.chan) dma_release_channel(host->dma.chan); +err_dma_probe_defer: free_irq(irq, host); return ret; } @@ -2573,6 +2580,7 @@ static const struct dev_pm_ops atmci_dev_pm_ops = { }; static struct platform_driver atmci_driver = { + .probe = atmci_probe, .remove = __exit_p(atmci_remove), .driver = { .name = "atmel_mci", @@ -2583,7 +2591,7 @@ static struct platform_driver atmci_driver = { static int __init atmci_init(void) { - return platform_driver_probe(&atmci_driver, atmci_probe); + return platform_driver_register(&atmci_driver); } static void __exit atmci_exit(void) @@ -2591,7 +2599,7 @@ static void __exit atmci_exit(void) platform_driver_unregister(&atmci_driver); } -late_initcall(atmci_init); /* try to load after dma driver when built-in */ +subsys_initcall(atmci_init); module_exit(atmci_exit); MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
Return probe defer if requesting a dma channel without a dma controller probed. Using late_initcall is no more needing. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> --- Sorry for the noise, typo in cc list. drivers/mmc/host/atmel-mci.c | 52 +++++++++++++++++++++++++------------------- 1 file changed, 30 insertions(+), 22 deletions(-)