| Message ID | 1424015031-24676-1-git-send-email-21cnbao@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
ping Ulf.... 2015-02-15 23:43 GMT+08:00 Barry Song <21cnbao@gmail.com>: > From: weijun yang <york.yang@csr.com> > > For the original tuning code, delay value is set to SD Bus Clock Delay > Register (SD_CLK_DELAY_SETTING) as (val | (Val << 7) | (val << 16)), > which means CLK_DELAY_IN1, CLK_DELAY_IN2 and CLK_DELAY_OUT are the > same and with 128 steps. This is doubtful. In CSR design specification > documents CS-304575-DR-3H, this issue is clarified, the delay[13:0] in > SD_CLK_DELAY_SETTING is simplied to the concatenation of {CLK_DELAY_IN2, > CLK_DELAY_IN1}. > Besides, for CMD19 tuning, no need to set CLK_DELAY_OUT([22,16] > of SD_CLK_DELAY_SETTING). > > Signed-off-by: weijun yang <york.yang@csr.com> > Signed-off-by: Barry Song <baohua.song@csr.com> > --- > drivers/mmc/host/sdhci-sirf.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/mmc/host/sdhci-sirf.c b/drivers/mmc/host/sdhci-sirf.c > index f6f82ec..4331409 100644 > --- a/drivers/mmc/host/sdhci-sirf.c > +++ b/drivers/mmc/host/sdhci-sirf.c > @@ -56,7 +56,7 @@ static int sdhci_sirf_execute_tuning(struct sdhci_host *host, u32 opcode) > int tuning_seq_cnt = 3; > u8 phase, tuned_phases[SIRF_TUNING_COUNT]; > u8 tuned_phase_cnt = 0; > - int rc, longest_range = 0; > + int rc = 0, longest_range = 0; > int start = -1, end = 0, tuning_value = -1, range = 0; > u16 clock_setting; > struct mmc_host *mmc = host->mmc; > @@ -68,7 +68,7 @@ retry: > phase = 0; > do { > sdhci_writel(host, > - clock_setting | phase | (phase << 7) | (phase << 16), > + clock_setting | phase, > SDHCI_CLK_DELAY_SETTING); > > if (!mmc_send_tuning(mmc)) { > @@ -102,7 +102,7 @@ retry: > */ > phase = tuning_value; > sdhci_writel(host, > - clock_setting | phase | (phase << 7) | (phase << 16), > + clock_setting | phase, > SDHCI_CLK_DELAY_SETTING); > > dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n", > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 15 February 2015 at 16:43, Barry Song <21cnbao@gmail.com> wrote: > From: weijun yang <york.yang@csr.com> > > For the original tuning code, delay value is set to SD Bus Clock Delay > Register (SD_CLK_DELAY_SETTING) as (val | (Val << 7) | (val << 16)), > which means CLK_DELAY_IN1, CLK_DELAY_IN2 and CLK_DELAY_OUT are the > same and with 128 steps. This is doubtful. In CSR design specification > documents CS-304575-DR-3H, this issue is clarified, the delay[13:0] in > SD_CLK_DELAY_SETTING is simplied to the concatenation of {CLK_DELAY_IN2, > CLK_DELAY_IN1}. > Besides, for CMD19 tuning, no need to set CLK_DELAY_OUT([22,16] > of SD_CLK_DELAY_SETTING). > > Signed-off-by: weijun yang <york.yang@csr.com> > Signed-off-by: Barry Song <baohua.song@csr.com> Applied, thanks! Kind regards Uffe > --- > drivers/mmc/host/sdhci-sirf.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/mmc/host/sdhci-sirf.c b/drivers/mmc/host/sdhci-sirf.c > index f6f82ec..4331409 100644 > --- a/drivers/mmc/host/sdhci-sirf.c > +++ b/drivers/mmc/host/sdhci-sirf.c > @@ -56,7 +56,7 @@ static int sdhci_sirf_execute_tuning(struct sdhci_host *host, u32 opcode) > int tuning_seq_cnt = 3; > u8 phase, tuned_phases[SIRF_TUNING_COUNT]; > u8 tuned_phase_cnt = 0; > - int rc, longest_range = 0; > + int rc = 0, longest_range = 0; > int start = -1, end = 0, tuning_value = -1, range = 0; > u16 clock_setting; > struct mmc_host *mmc = host->mmc; > @@ -68,7 +68,7 @@ retry: > phase = 0; > do { > sdhci_writel(host, > - clock_setting | phase | (phase << 7) | (phase << 16), > + clock_setting | phase, > SDHCI_CLK_DELAY_SETTING); > > if (!mmc_send_tuning(mmc)) { > @@ -102,7 +102,7 @@ retry: > */ > phase = tuning_value; > sdhci_writel(host, > - clock_setting | phase | (phase << 7) | (phase << 16), > + clock_setting | phase, > SDHCI_CLK_DELAY_SETTING); > > dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n", > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/sdhci-sirf.c b/drivers/mmc/host/sdhci-sirf.c index f6f82ec..4331409 100644 --- a/drivers/mmc/host/sdhci-sirf.c +++ b/drivers/mmc/host/sdhci-sirf.c @@ -56,7 +56,7 @@ static int sdhci_sirf_execute_tuning(struct sdhci_host *host, u32 opcode) int tuning_seq_cnt = 3; u8 phase, tuned_phases[SIRF_TUNING_COUNT]; u8 tuned_phase_cnt = 0; - int rc, longest_range = 0; + int rc = 0, longest_range = 0; int start = -1, end = 0, tuning_value = -1, range = 0; u16 clock_setting; struct mmc_host *mmc = host->mmc; @@ -68,7 +68,7 @@ retry: phase = 0; do { sdhci_writel(host, - clock_setting | phase | (phase << 7) | (phase << 16), + clock_setting | phase, SDHCI_CLK_DELAY_SETTING); if (!mmc_send_tuning(mmc)) { @@ -102,7 +102,7 @@ retry: */ phase = tuning_value; sdhci_writel(host, - clock_setting | phase | (phase << 7) | (phase << 16), + clock_setting | phase, SDHCI_CLK_DELAY_SETTING); dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n",