Message ID | 1439394548-1020-1-git-send-email-ludovic.desroches@atmel.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Wed, 2015-08-12 at 17:49 +0200, Ludovic Desroches wrote: > Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> > --- > > Hi, > > Here is a rough draft to fix the regression. I have only compiled it. > I will > update all the boards later. > > I have removed the mci_dma_data since it is no more used for ARM > platforms. I will test it later, though few comments below. > > arch/avr32/boards/atngw100/setup.c | 1 + > arch/avr32/mach-at32ap/at32ap700x.c | 31 > +++++++++++++++++++++-------- > arch/avr32/mach-at32ap/include/mach/board.h | 2 ++ > drivers/mmc/host/atmel-mci.c | 16 +++++++++++++-- > include/linux/atmel-mci.h | 2 ++ > include/linux/platform_data/mmc-atmel-mci.h | 22 ------------------- > - > 6 files changed, 42 insertions(+), 32 deletions(-) > delete mode 100644 include/linux/platform_data/mmc-atmel-mci.h > > diff --git a/arch/avr32/boards/atngw100/setup.c > b/arch/avr32/boards/atngw100/setup.c > index afeae89..8b4f3d1 100644 > --- a/arch/avr32/boards/atngw100/setup.c > +++ b/arch/avr32/boards/atngw100/setup.c > @@ -131,6 +131,7 @@ static struct mci_platform_data __initdata > mci0_data = { > .wp_pin = GPIO_PIN_PE(0), > #endif > }, > + .dma_filter = &atmci_filter, > }; > > static struct usba_platform_data atngw100_usba_data __initdata = { > diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach > -at32ap/at32ap700x.c > index 1d8b147..8c6f77e 100644 > --- a/arch/avr32/mach-at32ap/at32ap700x.c > +++ b/arch/avr32/mach-at32ap/at32ap700x.c > @@ -7,6 +7,7 @@ > */ > #include <linux/clk.h> > #include <linux/delay.h> > +#include <linux/dmaengine.h> > #include <linux/platform_data/dma-dw.h> > #include <linux/fb.h> > #include <linux/init.h> > @@ -17,7 +18,6 @@ > #include <linux/spi/spi.h> > #include <linux/usb/atmel_usba_udc.h> > > -#include <linux/platform_data/mmc-atmel-mci.h> > #include <linux/atmel-mci.h> > > #include <asm/io.h> > @@ -1332,7 +1332,7 @@ struct platform_device *__init > at32_add_device_mci(unsigned int id, struct mci_platform_data *data) > { > struct platform_device *pdev; > - struct mci_dma_data *slave; > + struct dw_dma_slave *slave; > u32 pioa_mask; > u32 piob_mask; > > @@ -1351,15 +1351,15 @@ at32_add_device_mci(unsigned int id, struct > mci_platform_data *data) > ARRAY_SIZE(atmel_mci0_resource))) > goto fail; > > - slave = kzalloc(sizeof(struct mci_dma_data), GFP_KERNEL); > + slave = kzalloc(sizeof(*slave), GFP_KERNEL); > if (!slave) > goto fail; > > - slave->sdata.dma_dev = &dw_dmac0_device.dev; > - slave->sdata.src_id = 0; > - slave->sdata.dst_id = 1; > - slave->sdata.src_master = 1; > - slave->sdata.dst_master = 0; > + slave->dma_dev = &dw_dmac0_device.dev; > + slave->src_id = 0; > + slave->dst_id = 1; > + slave->src_master = 1; > + slave->dst_master = 0; > > data->dma_slave = slave; > > @@ -1435,6 +1435,21 @@ fail: > return NULL; > } > > +bool atmci_filter(struct dma_chan *chan, void *pdata) > +{ > + struct dw_dma_slave *sl_pdata = pdata; I would prefer dws name for struct dw_dma_slave here. > + if (!sl_pdata) > + return false; > + > + if (sl_pdata->dma_dev == chan->device->dev) { > + chan->private = sl_pdata; > + return true; > + } else { > + return false; > + } > +} > + > /* ----------------------------------------------------------------- > --- > * LCDC > * ----------------------------------------------------------------- > --- */ > diff --git a/arch/avr32/mach-at32ap/include/mach/board.h > b/arch/avr32/mach-at32ap/include/mach/board.h > index f1a316d..e6f9e56 100644 > --- a/arch/avr32/mach-at32ap/include/mach/board.h > +++ b/arch/avr32/mach-at32ap/include/mach/board.h > @@ -4,6 +4,7 @@ > #ifndef __ASM_ARCH_BOARD_H > #define __ASM_ARCH_BOARD_H > > +#include <linux/dmaengine.h> > #include <linux/types.h> > #include <linux/serial.h> > #include <linux/platform_data/macb.h> > @@ -86,6 +87,7 @@ struct platform_device > *at32_add_device_twi(unsigned int id, > struct mci_platform_data; > struct platform_device * > at32_add_device_mci(unsigned int id, struct mci_platform_data > *data); > +bool atmci_filter(struct dma_chan *chan, void *pdata); Maybe at32_mci_filter() ? > > struct ac97c_platform_data; > struct platform_device * > diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel > -mci.c > index 9a39e0b..1d80135 100644 > --- a/drivers/mmc/host/atmel-mci.c > +++ b/drivers/mmc/host/atmel-mci.c > @@ -30,7 +30,6 @@ > #include <linux/stat.h> > #include <linux/types.h> > #include <linux/platform_data/atmel.h> > -#include <linux/platform_data/mmc-atmel-mci.h> > > #include <linux/mmc/host.h> > #include <linux/mmc/sdio.h> > @@ -2281,8 +2280,21 @@ static int atmci_configure_dma(struct > atmel_mci *host) > { > host->dma.chan = dma_request_slave_channel_reason(&host > ->pdev->dev, > "rxtx"); > - if (IS_ERR(host->dma.chan)) > + if (IS_ERR(host->dma.chan) == -ENODEV) { IS_ERR() returns boolean. It wouldn't be comparable with -Exxx. > + dma_cap_mask_t mask; > + struct mci_platform_data *pdata = host->pdev > ->dev.platform_data; > + /* */ > + dma_cap_zero(mask); > + dma_cap_set(DMA_SLAVE, mask); > + > + host->dma.chan = dma_request_channel(mask, > + pdata > ->dma_filter, > + pdata > ->dma_slave); > + if (!host->dma.chan) > + return -ENODEV; > + } else { > return PTR_ERR(host->dma.chan); > + } > > dev_info(&host->pdev->dev, "using %s for DMA transfers\n", > dma_chan_name(host->dma.chan)); > diff --git a/include/linux/atmel-mci.h b/include/linux/atmel-mci.h > index 9177947..fe5d72f 100644 > --- a/include/linux/atmel-mci.h > +++ b/include/linux/atmel-mci.h > @@ -1,6 +1,7 @@ > #ifndef __LINUX_ATMEL_MCI_H > #define __LINUX_ATMEL_MCI_H > > +#include <linux/dmaengine.h> You need only struct dma_chan. Why not struct dma_chan; ? > #include <linux/types.h> > > #define ATMCI_MAX_NR_SLOTS 2 > @@ -38,6 +39,7 @@ struct mci_slot_pdata { > struct mci_platform_data { > struct mci_dma_data *dma_slave; Should be above line left? > struct mci_slot_pdata slot[ATMCI_MAX_NR_SLOTS]; > + bool (*dma_filter) (struct dma_chan *chan, void > *pdata); > }; > > #endif /* __LINUX_ATMEL_MCI_H */ > diff --git a/include/linux/platform_data/mmc-atmel-mci.h > b/include/linux/platform_data/mmc-atmel-mci.h > deleted file mode 100644 > index 399a2d5..0000000 > --- a/include/linux/platform_data/mmc-atmel-mci.h > +++ /dev/null > @@ -1,22 +0,0 @@ > -#ifndef __MMC_ATMEL_MCI_H > -#define __MMC_ATMEL_MCI_H > - > -#include <linux/platform_data/dma-atmel.h> > -#include <linux/platform_data/dma-dw.h> > - > -/** > - * struct mci_dma_data - DMA data for MCI interface > - */ > -struct mci_dma_data { > -#ifdef CONFIG_ARM > - struct at_dma_slave sdata; > -#else > - struct dw_dma_slave sdata; > -#endif > -}; > - > -/* accessor macros */ > -#define slave_data_ptr(s) (&(s)->sdata) > -#define find_slave_dev(s) ((s)->sdata.dma_dev) > - > -#endif /* __MMC_ATMEL_MCI_H */
+Måns On Wed, 2015-08-12 at 17:49 +0200, Ludovic Desroches wrote: > Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> > --- > > Hi, > > Here is a rough draft to fix the regression. I have only compiled it. > I will > update all the boards later. > > I have removed the mci_dma_data since it is no more used for ARM > platforms. Sorry for really late answer, but seems Måns fixed the issue. He has a board to test as well. > > arch/avr32/boards/atngw100/setup.c | 1 + > arch/avr32/mach-at32ap/at32ap700x.c | 31 > +++++++++++++++++++++-------- > arch/avr32/mach-at32ap/include/mach/board.h | 2 ++ > drivers/mmc/host/atmel-mci.c | 16 +++++++++++++-- > include/linux/atmel-mci.h | 2 ++ > include/linux/platform_data/mmc-atmel-mci.h | 22 ----------------- > --- > 6 files changed, 42 insertions(+), 32 deletions(-) > delete mode 100644 include/linux/platform_data/mmc-atmel-mci.h > > diff --git a/arch/avr32/boards/atngw100/setup.c > b/arch/avr32/boards/atngw100/setup.c > index afeae89..8b4f3d1 100644 > --- a/arch/avr32/boards/atngw100/setup.c > +++ b/arch/avr32/boards/atngw100/setup.c > @@ -131,6 +131,7 @@ static struct mci_platform_data __initdata > mci0_data = { > .wp_pin = GPIO_PIN_PE(0), > #endif > }, > + .dma_filter = &atmci_filter, > }; > > static struct usba_platform_data atngw100_usba_data __initdata = { > diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach- > at32ap/at32ap700x.c > index 1d8b147..8c6f77e 100644 > --- a/arch/avr32/mach-at32ap/at32ap700x.c > +++ b/arch/avr32/mach-at32ap/at32ap700x.c > @@ -7,6 +7,7 @@ > */ > #include <linux/clk.h> > #include <linux/delay.h> > +#include <linux/dmaengine.h> > #include <linux/platform_data/dma-dw.h> > #include <linux/fb.h> > #include <linux/init.h> > @@ -17,7 +18,6 @@ > #include <linux/spi/spi.h> > #include <linux/usb/atmel_usba_udc.h> > > -#include <linux/platform_data/mmc-atmel-mci.h> > #include <linux/atmel-mci.h> > > #include <asm/io.h> > @@ -1332,7 +1332,7 @@ struct platform_device *__init > at32_add_device_mci(unsigned int id, struct mci_platform_data *data) > { > struct platform_device *pdev; > - struct mci_dma_data *slave; > + struct dw_dma_slave *slave; > u32 pioa_mask; > u32 piob_mask; > > @@ -1351,15 +1351,15 @@ at32_add_device_mci(unsigned int id, struct > mci_platform_data *data) > ARRAY_SIZE(atmel_mci0_resource))) > goto fail; > > - slave = kzalloc(sizeof(struct mci_dma_data), GFP_KERNEL); > + slave = kzalloc(sizeof(*slave), GFP_KERNEL); > if (!slave) > goto fail; > > - slave->sdata.dma_dev = &dw_dmac0_device.dev; > - slave->sdata.src_id = 0; > - slave->sdata.dst_id = 1; > - slave->sdata.src_master = 1; > - slave->sdata.dst_master = 0; > + slave->dma_dev = &dw_dmac0_device.dev; > + slave->src_id = 0; > + slave->dst_id = 1; > + slave->src_master = 1; > + slave->dst_master = 0; > > data->dma_slave = slave; > > @@ -1435,6 +1435,21 @@ fail: > return NULL; > } > > +bool atmci_filter(struct dma_chan *chan, void *pdata) > +{ > + struct dw_dma_slave *sl_pdata = pdata; > + > + if (!sl_pdata) > + return false; > + > + if (sl_pdata->dma_dev == chan->device->dev) { > + chan->private = sl_pdata; > + return true; > + } else { > + return false; > + } > +} > + > /* --------------------------------------------------------------- > ----- > * LCDC > * --------------------------------------------------------------- > ----- */ > diff --git a/arch/avr32/mach-at32ap/include/mach/board.h > b/arch/avr32/mach-at32ap/include/mach/board.h > index f1a316d..e6f9e56 100644 > --- a/arch/avr32/mach-at32ap/include/mach/board.h > +++ b/arch/avr32/mach-at32ap/include/mach/board.h > @@ -4,6 +4,7 @@ > #ifndef __ASM_ARCH_BOARD_H > #define __ASM_ARCH_BOARD_H > > +#include <linux/dmaengine.h> > #include <linux/types.h> > #include <linux/serial.h> > #include <linux/platform_data/macb.h> > @@ -86,6 +87,7 @@ struct platform_device > *at32_add_device_twi(unsigned int id, > struct mci_platform_data; > struct platform_device * > at32_add_device_mci(unsigned int id, struct mci_platform_data > *data); > +bool atmci_filter(struct dma_chan *chan, void *pdata); > > struct ac97c_platform_data; > struct platform_device * > diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel- > mci.c > index 9a39e0b..1d80135 100644 > --- a/drivers/mmc/host/atmel-mci.c > +++ b/drivers/mmc/host/atmel-mci.c > @@ -30,7 +30,6 @@ > #include <linux/stat.h> > #include <linux/types.h> > #include <linux/platform_data/atmel.h> > -#include <linux/platform_data/mmc-atmel-mci.h> > > #include <linux/mmc/host.h> > #include <linux/mmc/sdio.h> > @@ -2281,8 +2280,21 @@ static int atmci_configure_dma(struct > atmel_mci *host) > { > host->dma.chan = dma_request_slave_channel_reason(&host- > >pdev->dev, > "rxtx"); > - if (IS_ERR(host->dma.chan)) > + if (IS_ERR(host->dma.chan) == -ENODEV) { > + dma_cap_mask_t mask; > + struct mci_platform_data *pdata = host->pdev- > >dev.platform_data; > + /* */ > + dma_cap_zero(mask); > + dma_cap_set(DMA_SLAVE, mask); > + > + host->dma.chan = dma_request_channel(mask, > + pdata- > >dma_filter, > + pdata- > >dma_slave); > + if (!host->dma.chan) > + return -ENODEV; > + } else { > return PTR_ERR(host->dma.chan); > + } > > dev_info(&host->pdev->dev, "using %s for DMA transfers\n", > dma_chan_name(host->dma.chan)); > diff --git a/include/linux/atmel-mci.h b/include/linux/atmel-mci.h > index 9177947..fe5d72f 100644 > --- a/include/linux/atmel-mci.h > +++ b/include/linux/atmel-mci.h > @@ -1,6 +1,7 @@ > #ifndef __LINUX_ATMEL_MCI_H > #define __LINUX_ATMEL_MCI_H > > +#include <linux/dmaengine.h> > #include <linux/types.h> > > #define ATMCI_MAX_NR_SLOTS 2 > @@ -38,6 +39,7 @@ struct mci_slot_pdata { > struct mci_platform_data { > struct mci_dma_data *dma_slave; > struct mci_slot_pdata slot[ATMCI_MAX_NR_SLOTS]; > + bool (*dma_filter) (struct dma_chan *chan, void > *pdata); > }; > > #endif /* __LINUX_ATMEL_MCI_H */ > diff --git a/include/linux/platform_data/mmc-atmel-mci.h > b/include/linux/platform_data/mmc-atmel-mci.h > deleted file mode 100644 > index 399a2d5..0000000 > --- a/include/linux/platform_data/mmc-atmel-mci.h > +++ /dev/null > @@ -1,22 +0,0 @@ > -#ifndef __MMC_ATMEL_MCI_H > -#define __MMC_ATMEL_MCI_H > - > -#include <linux/platform_data/dma-atmel.h> > -#include <linux/platform_data/dma-dw.h> > - > -/** > - * struct mci_dma_data - DMA data for MCI interface > - */ > -struct mci_dma_data { > -#ifdef CONFIG_ARM > - struct at_dma_slave sdata; > -#else > - struct dw_dma_slave sdata; > -#endif > -}; > - > -/* accessor macros */ > -#define slave_data_ptr(s) (&(s)->sdata) > -#define find_slave_dev(s) ((s)->sdata.dma_dev) > - > -#endif /* __MMC_ATMEL_MCI_H */
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c index afeae89..8b4f3d1 100644 --- a/arch/avr32/boards/atngw100/setup.c +++ b/arch/avr32/boards/atngw100/setup.c @@ -131,6 +131,7 @@ static struct mci_platform_data __initdata mci0_data = { .wp_pin = GPIO_PIN_PE(0), #endif }, + .dma_filter = &atmci_filter, }; static struct usba_platform_data atngw100_usba_data __initdata = { diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 1d8b147..8c6f77e 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -7,6 +7,7 @@ */ #include <linux/clk.h> #include <linux/delay.h> +#include <linux/dmaengine.h> #include <linux/platform_data/dma-dw.h> #include <linux/fb.h> #include <linux/init.h> @@ -17,7 +18,6 @@ #include <linux/spi/spi.h> #include <linux/usb/atmel_usba_udc.h> -#include <linux/platform_data/mmc-atmel-mci.h> #include <linux/atmel-mci.h> #include <asm/io.h> @@ -1332,7 +1332,7 @@ struct platform_device *__init at32_add_device_mci(unsigned int id, struct mci_platform_data *data) { struct platform_device *pdev; - struct mci_dma_data *slave; + struct dw_dma_slave *slave; u32 pioa_mask; u32 piob_mask; @@ -1351,15 +1351,15 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data) ARRAY_SIZE(atmel_mci0_resource))) goto fail; - slave = kzalloc(sizeof(struct mci_dma_data), GFP_KERNEL); + slave = kzalloc(sizeof(*slave), GFP_KERNEL); if (!slave) goto fail; - slave->sdata.dma_dev = &dw_dmac0_device.dev; - slave->sdata.src_id = 0; - slave->sdata.dst_id = 1; - slave->sdata.src_master = 1; - slave->sdata.dst_master = 0; + slave->dma_dev = &dw_dmac0_device.dev; + slave->src_id = 0; + slave->dst_id = 1; + slave->src_master = 1; + slave->dst_master = 0; data->dma_slave = slave; @@ -1435,6 +1435,21 @@ fail: return NULL; } +bool atmci_filter(struct dma_chan *chan, void *pdata) +{ + struct dw_dma_slave *sl_pdata = pdata; + + if (!sl_pdata) + return false; + + if (sl_pdata->dma_dev == chan->device->dev) { + chan->private = sl_pdata; + return true; + } else { + return false; + } +} + /* -------------------------------------------------------------------- * LCDC * -------------------------------------------------------------------- */ diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h index f1a316d..e6f9e56 100644 --- a/arch/avr32/mach-at32ap/include/mach/board.h +++ b/arch/avr32/mach-at32ap/include/mach/board.h @@ -4,6 +4,7 @@ #ifndef __ASM_ARCH_BOARD_H #define __ASM_ARCH_BOARD_H +#include <linux/dmaengine.h> #include <linux/types.h> #include <linux/serial.h> #include <linux/platform_data/macb.h> @@ -86,6 +87,7 @@ struct platform_device *at32_add_device_twi(unsigned int id, struct mci_platform_data; struct platform_device * at32_add_device_mci(unsigned int id, struct mci_platform_data *data); +bool atmci_filter(struct dma_chan *chan, void *pdata); struct ac97c_platform_data; struct platform_device * diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 9a39e0b..1d80135 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -30,7 +30,6 @@ #include <linux/stat.h> #include <linux/types.h> #include <linux/platform_data/atmel.h> -#include <linux/platform_data/mmc-atmel-mci.h> #include <linux/mmc/host.h> #include <linux/mmc/sdio.h> @@ -2281,8 +2280,21 @@ static int atmci_configure_dma(struct atmel_mci *host) { host->dma.chan = dma_request_slave_channel_reason(&host->pdev->dev, "rxtx"); - if (IS_ERR(host->dma.chan)) + if (IS_ERR(host->dma.chan) == -ENODEV) { + dma_cap_mask_t mask; + struct mci_platform_data *pdata = host->pdev->dev.platform_data; + /* */ + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + host->dma.chan = dma_request_channel(mask, + pdata->dma_filter, + pdata->dma_slave); + if (!host->dma.chan) + return -ENODEV; + } else { return PTR_ERR(host->dma.chan); + } dev_info(&host->pdev->dev, "using %s for DMA transfers\n", dma_chan_name(host->dma.chan)); diff --git a/include/linux/atmel-mci.h b/include/linux/atmel-mci.h index 9177947..fe5d72f 100644 --- a/include/linux/atmel-mci.h +++ b/include/linux/atmel-mci.h @@ -1,6 +1,7 @@ #ifndef __LINUX_ATMEL_MCI_H #define __LINUX_ATMEL_MCI_H +#include <linux/dmaengine.h> #include <linux/types.h> #define ATMCI_MAX_NR_SLOTS 2 @@ -38,6 +39,7 @@ struct mci_slot_pdata { struct mci_platform_data { struct mci_dma_data *dma_slave; struct mci_slot_pdata slot[ATMCI_MAX_NR_SLOTS]; + bool (*dma_filter) (struct dma_chan *chan, void *pdata); }; #endif /* __LINUX_ATMEL_MCI_H */ diff --git a/include/linux/platform_data/mmc-atmel-mci.h b/include/linux/platform_data/mmc-atmel-mci.h deleted file mode 100644 index 399a2d5..0000000 --- a/include/linux/platform_data/mmc-atmel-mci.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef __MMC_ATMEL_MCI_H -#define __MMC_ATMEL_MCI_H - -#include <linux/platform_data/dma-atmel.h> -#include <linux/platform_data/dma-dw.h> - -/** - * struct mci_dma_data - DMA data for MCI interface - */ -struct mci_dma_data { -#ifdef CONFIG_ARM - struct at_dma_slave sdata; -#else - struct dw_dma_slave sdata; -#endif -}; - -/* accessor macros */ -#define slave_data_ptr(s) (&(s)->sdata) -#define find_slave_dev(s) ((s)->sdata.dma_dev) - -#endif /* __MMC_ATMEL_MCI_H */
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> --- Hi, Here is a rough draft to fix the regression. I have only compiled it. I will update all the boards later. I have removed the mci_dma_data since it is no more used for ARM platforms. arch/avr32/boards/atngw100/setup.c | 1 + arch/avr32/mach-at32ap/at32ap700x.c | 31 +++++++++++++++++++++-------- arch/avr32/mach-at32ap/include/mach/board.h | 2 ++ drivers/mmc/host/atmel-mci.c | 16 +++++++++++++-- include/linux/atmel-mci.h | 2 ++ include/linux/platform_data/mmc-atmel-mci.h | 22 -------------------- 6 files changed, 42 insertions(+), 32 deletions(-) delete mode 100644 include/linux/platform_data/mmc-atmel-mci.h