| Message ID | 1447161830-27205-1-git-send-email-ludovic.desroches@atmel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 10 November 2015 at 14:23, Ludovic Desroches <ludovic.desroches@atmel.com> wrote: > Add runtime PM support and use runtime_force_suspend|resume() for system > PM. > > Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> > --- > > Changes: > - from v2: cleanup thanks to Ulf feedback > - from v1: take a runtime PM centric approach > > drivers/mmc/host/sdhci-of-at91.c | 67 +++++++++++++++++++++++++++++++++++++++- > 1 file changed, 66 insertions(+), 1 deletion(-) > > diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c > index 06d0b50..bbac18e 100644 > --- a/drivers/mmc/host/sdhci-of-at91.c > +++ b/drivers/mmc/host/sdhci-of-at91.c > @@ -21,6 +21,8 @@ > #include <linux/module.h> > #include <linux/of.h> > #include <linux/of_device.h> > +#include <linux/pm.h> > +#include <linux/pm_runtime.h> > > #include "sdhci-pltfm.h" > > @@ -51,6 +53,60 @@ static const struct of_device_id sdhci_at91_dt_match[] = { > {} > }; > > +#ifdef CONFIG_PM > +static int sdhci_at91_runtime_suspend(struct device *dev) > +{ > + struct sdhci_host *host = dev_get_drvdata(dev); > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > + struct sdhci_at91_priv *priv = pltfm_host->priv; > + int ret; > + > + ret = sdhci_runtime_suspend_host(host); > + > + clk_disable_unprepare(priv->gck); > + clk_disable_unprepare(priv->hclock); > + clk_disable_unprepare(priv->mainck); > + > + return ret; > +} > + > +static int sdhci_at91_runtime_resume(struct device *dev) > +{ > + struct sdhci_host *host = dev_get_drvdata(dev); > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > + struct sdhci_at91_priv *priv = pltfm_host->priv; > + int ret; > + > + ret = clk_prepare_enable(priv->mainck); > + if (ret) { > + dev_err(dev, "can't enable mainck\n"); > + return ret; > + } > + > + ret = clk_prepare_enable(priv->hclock); > + if (ret) { > + dev_err(dev, "can't enable hclock\n"); > + return ret; > + } > + > + ret = clk_prepare_enable(priv->gck); > + if (ret) { > + dev_err(dev, "can't enable gck\n"); > + return ret; > + } > + > + return sdhci_runtime_resume_host(host); > +} > +#endif /* CONFIG_PM */ > + > +static const struct dev_pm_ops sdhci_at91_dev_pm_ops = { > + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, > + pm_runtime_force_resume) > + SET_RUNTIME_PM_OPS(sdhci_at91_runtime_suspend, > + sdhci_at91_runtime_resume, > + NULL) > +}; > + > static int sdhci_at91_probe(struct platform_device *pdev) > { > const struct of_device_id *match; > @@ -144,6 +200,11 @@ static int sdhci_at91_probe(struct platform_device *pdev) > > sdhci_get_of_property(pdev); > > + pm_runtime_set_active(&pdev->dev); > + pm_runtime_enable(&pdev->dev); > + pm_runtime_set_autosuspend_delay(&pdev->dev, 50); > + pm_runtime_use_autosuspend(&pdev->dev); > + > ret = sdhci_add_host(host); > if (ret) > goto clocks_disable_unprepare; You need to add error handling of runtime PM after this point. Typically: pm_runtime_disable() and pm_runtime_set_suspended() needs to be done. > @@ -165,6 +226,10 @@ static int sdhci_at91_remove(struct platform_device *pdev) > struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > struct sdhci_at91_priv *priv = pltfm_host->priv; > > + pm_runtime_get_sync(&pdev->dev); > + pm_runtime_disable(&pdev->dev); > + pm_runtime_put_noidle(&pdev->dev); > + > sdhci_pltfm_unregister(pdev); > > clk_disable_unprepare(priv->gck); > @@ -178,7 +243,7 @@ static struct platform_driver sdhci_at91_driver = { > .driver = { > .name = "sdhci-at91", > .of_match_table = sdhci_at91_dt_match, > - .pm = SDHCI_PLTFM_PMOPS, > + .pm = &sdhci_at91_dev_pm_ops, > }, > .probe = sdhci_at91_probe, > .remove = sdhci_at91_remove, > -- > 2.5.0 > Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Nov 10, 2015 at 03:03:57PM +0100, Ulf Hansson wrote: > On 10 November 2015 at 14:23, Ludovic Desroches > <ludovic.desroches@atmel.com> wrote: > > Add runtime PM support and use runtime_force_suspend|resume() for system > > PM. > > > > Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> > > --- > > > > Changes: > > - from v2: cleanup thanks to Ulf feedback > > - from v1: take a runtime PM centric approach > > > > drivers/mmc/host/sdhci-of-at91.c | 67 +++++++++++++++++++++++++++++++++++++++- > > 1 file changed, 66 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c > > index 06d0b50..bbac18e 100644 > > --- a/drivers/mmc/host/sdhci-of-at91.c > > +++ b/drivers/mmc/host/sdhci-of-at91.c > > @@ -21,6 +21,8 @@ > > #include <linux/module.h> > > #include <linux/of.h> > > #include <linux/of_device.h> > > +#include <linux/pm.h> > > +#include <linux/pm_runtime.h> > > > > #include "sdhci-pltfm.h" > > > > @@ -51,6 +53,60 @@ static const struct of_device_id sdhci_at91_dt_match[] = { > > {} > > }; > > > > +#ifdef CONFIG_PM > > +static int sdhci_at91_runtime_suspend(struct device *dev) > > +{ > > + struct sdhci_host *host = dev_get_drvdata(dev); > > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > > + struct sdhci_at91_priv *priv = pltfm_host->priv; > > + int ret; > > + > > + ret = sdhci_runtime_suspend_host(host); > > + > > + clk_disable_unprepare(priv->gck); > > + clk_disable_unprepare(priv->hclock); > > + clk_disable_unprepare(priv->mainck); > > + > > + return ret; > > +} > > + > > +static int sdhci_at91_runtime_resume(struct device *dev) > > +{ > > + struct sdhci_host *host = dev_get_drvdata(dev); > > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > > + struct sdhci_at91_priv *priv = pltfm_host->priv; > > + int ret; > > + > > + ret = clk_prepare_enable(priv->mainck); > > + if (ret) { > > + dev_err(dev, "can't enable mainck\n"); > > + return ret; > > + } > > + > > + ret = clk_prepare_enable(priv->hclock); > > + if (ret) { > > + dev_err(dev, "can't enable hclock\n"); > > + return ret; > > + } > > + > > + ret = clk_prepare_enable(priv->gck); > > + if (ret) { > > + dev_err(dev, "can't enable gck\n"); > > + return ret; > > + } > > + > > + return sdhci_runtime_resume_host(host); > > +} > > +#endif /* CONFIG_PM */ > > + > > +static const struct dev_pm_ops sdhci_at91_dev_pm_ops = { > > + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, > > + pm_runtime_force_resume) > > + SET_RUNTIME_PM_OPS(sdhci_at91_runtime_suspend, > > + sdhci_at91_runtime_resume, > > + NULL) > > +}; > > + > > static int sdhci_at91_probe(struct platform_device *pdev) > > { > > const struct of_device_id *match; > > @@ -144,6 +200,11 @@ static int sdhci_at91_probe(struct platform_device *pdev) > > > > sdhci_get_of_property(pdev); > > > > + pm_runtime_set_active(&pdev->dev); > > + pm_runtime_enable(&pdev->dev); > > + pm_runtime_set_autosuspend_delay(&pdev->dev, 50); > > + pm_runtime_use_autosuspend(&pdev->dev); > > + > > ret = sdhci_add_host(host); > > if (ret) > > goto clocks_disable_unprepare; > > You need to add error handling of runtime PM after this point. > > Typically: > pm_runtime_disable() and pm_runtime_set_suspended() needs to be done. I am not confortable with pm_runtime helpers, having a look to several drivers, I see different ways to manage a probe failing and the device removing. I'll trust you and I'll dig later into this subject. Regards Ludovic > > > @@ -165,6 +226,10 @@ static int sdhci_at91_remove(struct platform_device *pdev) > > struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > > struct sdhci_at91_priv *priv = pltfm_host->priv; > > > > + pm_runtime_get_sync(&pdev->dev); > > + pm_runtime_disable(&pdev->dev); > > + pm_runtime_put_noidle(&pdev->dev); > > + > > sdhci_pltfm_unregister(pdev); > > > > clk_disable_unprepare(priv->gck); > > @@ -178,7 +243,7 @@ static struct platform_driver sdhci_at91_driver = { > > .driver = { > > .name = "sdhci-at91", > > .of_match_table = sdhci_at91_dt_match, > > - .pm = SDHCI_PLTFM_PMOPS, > > + .pm = &sdhci_at91_dev_pm_ops, > > }, > > .probe = sdhci_at91_probe, > > .remove = sdhci_at91_remove, > > -- > > 2.5.0 > > > > Kind regards > Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c index 06d0b50..bbac18e 100644 --- a/drivers/mmc/host/sdhci-of-at91.c +++ b/drivers/mmc/host/sdhci-of-at91.c @@ -21,6 +21,8 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> #include "sdhci-pltfm.h" @@ -51,6 +53,60 @@ static const struct of_device_id sdhci_at91_dt_match[] = { {} }; +#ifdef CONFIG_PM +static int sdhci_at91_runtime_suspend(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_at91_priv *priv = pltfm_host->priv; + int ret; + + ret = sdhci_runtime_suspend_host(host); + + clk_disable_unprepare(priv->gck); + clk_disable_unprepare(priv->hclock); + clk_disable_unprepare(priv->mainck); + + return ret; +} + +static int sdhci_at91_runtime_resume(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_at91_priv *priv = pltfm_host->priv; + int ret; + + ret = clk_prepare_enable(priv->mainck); + if (ret) { + dev_err(dev, "can't enable mainck\n"); + return ret; + } + + ret = clk_prepare_enable(priv->hclock); + if (ret) { + dev_err(dev, "can't enable hclock\n"); + return ret; + } + + ret = clk_prepare_enable(priv->gck); + if (ret) { + dev_err(dev, "can't enable gck\n"); + return ret; + } + + return sdhci_runtime_resume_host(host); +} +#endif /* CONFIG_PM */ + +static const struct dev_pm_ops sdhci_at91_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + SET_RUNTIME_PM_OPS(sdhci_at91_runtime_suspend, + sdhci_at91_runtime_resume, + NULL) +}; + static int sdhci_at91_probe(struct platform_device *pdev) { const struct of_device_id *match; @@ -144,6 +200,11 @@ static int sdhci_at91_probe(struct platform_device *pdev) sdhci_get_of_property(pdev); + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, 50); + pm_runtime_use_autosuspend(&pdev->dev); + ret = sdhci_add_host(host); if (ret) goto clocks_disable_unprepare; @@ -165,6 +226,10 @@ static int sdhci_at91_remove(struct platform_device *pdev) struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_at91_priv *priv = pltfm_host->priv; + pm_runtime_get_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + sdhci_pltfm_unregister(pdev); clk_disable_unprepare(priv->gck); @@ -178,7 +243,7 @@ static struct platform_driver sdhci_at91_driver = { .driver = { .name = "sdhci-at91", .of_match_table = sdhci_at91_dt_match, - .pm = SDHCI_PLTFM_PMOPS, + .pm = &sdhci_at91_dev_pm_ops, }, .probe = sdhci_at91_probe, .remove = sdhci_at91_remove,
Add runtime PM support and use runtime_force_suspend|resume() for system PM. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> --- Changes: - from v2: cleanup thanks to Ulf feedback - from v1: take a runtime PM centric approach drivers/mmc/host/sdhci-of-at91.c | 67 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 66 insertions(+), 1 deletion(-)