diff mbox

[3/4] ARM: bcm2835: Include SDHOST in the device tree.

Message ID 1456527942-3045-4-git-send-email-eric@anholt.net (mailing list archive)
State New, archived
Headers show

Commit Message

Eric Anholt Feb. 26, 2016, 11:05 p.m. UTC
It's disabled by default, and will be enabled by a particular board's
DT.  The DMA channels are also currently left out, because our DMA
engine support doesn't yet include slave SG, and there doesn't appear
to be a clean way to include "does slave SG" in the channel
request/config process.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 arch/arm/boot/dts/bcm283x.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Sergei Shtylyov Feb. 27, 2016, 6:17 p.m. UTC | #1
Hello.

On 02/27/2016 02:05 AM, Eric Anholt wrote:

> It's disabled by default, and will be enabled by a particular board's
> DT.  The DMA channels are also currently left out, because our DMA
> engine support doesn't yet include slave SG, and there doesn't appear
> to be a clean way to include "does slave SG" in the channel
> request/config process.
>
> Signed-off-by: Eric Anholt <eric@anholt.net>
> ---
>   arch/arm/boot/dts/bcm283x.dtsi | 8 ++++++++
>   1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
> index 597a78f..7b2721b 100644
> --- a/arch/arm/boot/dts/bcm283x.dtsi
> +++ b/arch/arm/boot/dts/bcm283x.dtsi
> @@ -366,6 +366,14 @@
>   			status = "disabled";
>   		};
>
> +		sdhost: sdhost@7e202000 {

    Please just sd@7e202000 to better comply with ePAPR.

[...]

MBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index 597a78f..7b2721b 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -366,6 +366,14 @@ 
 			status = "disabled";
 		};
 
+		sdhost: sdhost@7e202000 {
+			compatible = "brcm,bcm2835-sdhost";
+			reg = <0x7e202000 0x100>;
+			interrupts = <2 24>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			status = "disabled";
+		};
+
 		pwm: pwm@7e20c000 {
 			compatible = "brcm,bcm2835-pwm";
 			reg = <0x7e20c000 0x28>;