@@ -15,6 +15,7 @@
*/
#include <linux/clk.h>
+#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/mmc/host.h>
@@ -37,8 +38,52 @@ struct sdhci_at91_priv {
struct clk *mainck;
};
+static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ u16 clk;
+ unsigned long timeout;
+
+ host->mmc->actual_clock = 0;
+
+ /*
+ * There is no requirement to disable the internal clock before
+ * changing the SD clock configuration. Moreover, disabling the
+ * internal clock, changing the configuration and re-enabling the
+ * internal clock causes some bugs. It can prevent to get the internal
+ * clock stable flag ready and an unexpected switch to the base clock
+ * when using presets.
+ */
+ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ clk &= SDHCI_CLOCK_INT_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ if (clock == 0)
+ return;
+
+ clk = sdhci_compute_clock_config(host, clock);
+
+ clk |= SDHCI_CLOCK_INT_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ /* Wait max 20 ms */
+ timeout = 20;
+ while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
+ & SDHCI_CLOCK_INT_STABLE)) {
+ if (timeout == 0) {
+ pr_err("%s: Internal clock never stabilised.\n",
+ mmc_hostname(host->mmc));
+ return;
+ }
+ timeout--;
+ mdelay(1);
+ }
+
+ clk |= SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+}
+
static const struct sdhci_ops sdhci_at91_sama5d2_ops = {
- .set_clock = sdhci_set_clock,
+ .set_clock = sdhci_at91_set_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
@@ -46,7 +91,6 @@ static const struct sdhci_ops sdhci_at91_sama5d2_ops = {
static const struct sdhci_pltfm_data soc_data_sama5d2 = {
.ops = &sdhci_at91_sama5d2_ops,
- .quirks2 = SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST,
};
static const struct of_device_id sdhci_at91_dt_match[] = {
Disabling the internal clock while configuring the SD card clock can lead to internal clock stabilization issue and/or unexpected switch to the base clock when using presets. A quirk SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST was introduced to fix these bugs. The cause was assumed to be a too long internal re-synchronisation but it seems in some cases the delay (even if longer) doesn't fix this bug. The safest workaround is to not disable/enable the internal clock during the SD card clock configuration. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> --- drivers/mmc/host/sdhci-of-at91.c | 48 ++++++++++++++++++++++++++++++++++++++-- 1 file changed, 46 insertions(+), 2 deletions(-)