| Message ID | 1461832731-28422-1-git-send-email-shawn.lin@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 28/04/16 11:38, Shawn Lin wrote: > commit 61b914eb81f8 ("mmc: sdhci-of-arasan: add phy support for > sdhci-of-arasan") introduce phy support for arasan. According to > the vendor's databook, we should make sure the phy is in poweroff > status before we configure the clk stuff. Otherwise it may cause > some IO sample timing issues from the test. And we don't need this > extra operation while running in low performance mode since phy > doesn't trigger sampling block. > > Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> > > --- > > Changes in v2: > - change commit msg title to indicate it's a fix > - fix a typo in commmit msg > > drivers/mmc/host/sdhci-of-arasan.c | 20 +++++++++++++++++++- > 1 file changed, 19 insertions(+), 1 deletion(-) > > diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c > index 2e482b1..20b859e 100644 > --- a/drivers/mmc/host/sdhci-of-arasan.c > +++ b/drivers/mmc/host/sdhci-of-arasan.c > @@ -55,8 +55,26 @@ static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host *host) > return freq; > } > > +static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock) > +{ > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > + struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host); > + bool ctrl_phy = false; > + > + if (clock > MMC_HIGH_52_MAX_DTR && (!IS_ERR(sdhci_arasan->phy))) > + ctrl_phy = true; > + > + if (ctrl_phy) > + phy_power_off(sdhci_arasan->phy); > + > + sdhci_set_clock(host, clock); > + > + if (ctrl_phy) > + phy_power_on(sdhci_arasan->phy); > +} > + > static struct sdhci_ops sdhci_arasan_ops = { > - .set_clock = sdhci_set_clock, > + .set_clock = sdhci_arasan_set_clock, > .get_max_clock = sdhci_pltfm_clk_get_max_clock, > .get_timeout_clock = sdhci_arasan_get_timeout_clock, > .set_bus_width = sdhci_set_bus_width, > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 28 April 2016 at 10:38, Shawn Lin <shawn.lin@rock-chips.com> wrote: > commit 61b914eb81f8 ("mmc: sdhci-of-arasan: add phy support for > sdhci-of-arasan") introduce phy support for arasan. According to > the vendor's databook, we should make sure the phy is in poweroff > status before we configure the clk stuff. Otherwise it may cause > some IO sample timing issues from the test. And we don't need this > extra operation while running in low performance mode since phy > doesn't trigger sampling block. > > Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Thanks, applied for next! Kind regards Uffe > > --- > > Changes in v2: > - change commit msg title to indicate it's a fix > - fix a typo in commmit msg > > drivers/mmc/host/sdhci-of-arasan.c | 20 +++++++++++++++++++- > 1 file changed, 19 insertions(+), 1 deletion(-) > > diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c > index 2e482b1..20b859e 100644 > --- a/drivers/mmc/host/sdhci-of-arasan.c > +++ b/drivers/mmc/host/sdhci-of-arasan.c > @@ -55,8 +55,26 @@ static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host *host) > return freq; > } > > +static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock) > +{ > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > + struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host); > + bool ctrl_phy = false; > + > + if (clock > MMC_HIGH_52_MAX_DTR && (!IS_ERR(sdhci_arasan->phy))) > + ctrl_phy = true; > + > + if (ctrl_phy) > + phy_power_off(sdhci_arasan->phy); > + > + sdhci_set_clock(host, clock); > + > + if (ctrl_phy) > + phy_power_on(sdhci_arasan->phy); > +} > + > static struct sdhci_ops sdhci_arasan_ops = { > - .set_clock = sdhci_set_clock, > + .set_clock = sdhci_arasan_set_clock, > .get_max_clock = sdhci_pltfm_clk_get_max_clock, > .get_timeout_clock = sdhci_arasan_get_timeout_clock, > .set_bus_width = sdhci_set_bus_width, > -- > 2.3.7 > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
? 2016/4/28 18:38, Ulf Hansson ??: > On 28 April 2016 at 10:38, Shawn Lin <shawn.lin@rock-chips.com> wrote: >> commit 61b914eb81f8 ("mmc: sdhci-of-arasan: add phy support for >> sdhci-of-arasan") introduce phy support for arasan. According to >> the vendor's databook, we should make sure the phy is in poweroff >> status before we configure the clk stuff. Otherwise it may cause >> some IO sample timing issues from the test. And we don't need this >> extra operation while running in low performance mode since phy >> doesn't trigger sampling block. >> >> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> > > Thanks, applied for next! Thanks for applying v2 but, could you please drop it and applied v3 I just send :) . Because v2 introduces a bug. Set_clock callback will be called under the protection of spinlock in sdhci_do_set_ios. However PHY APIs need mutex which fails the kernel's debug check BUG: sleeping function called from invalid context at kernel/locking/mutex.c > > Kind regards > Uffe > >> >> --- >> >> Changes in v2: >> - change commit msg title to indicate it's a fix >> - fix a typo in commmit msg >> >> drivers/mmc/host/sdhci-of-arasan.c | 20 +++++++++++++++++++- >> 1 file changed, 19 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c >> index 2e482b1..20b859e 100644 >> --- a/drivers/mmc/host/sdhci-of-arasan.c >> +++ b/drivers/mmc/host/sdhci-of-arasan.c >> @@ -55,8 +55,26 @@ static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host *host) >> return freq; >> } >> >> +static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock) >> +{ >> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); >> + struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host); >> + bool ctrl_phy = false; >> + >> + if (clock > MMC_HIGH_52_MAX_DTR && (!IS_ERR(sdhci_arasan->phy))) >> + ctrl_phy = true; >> + >> + if (ctrl_phy) >> + phy_power_off(sdhci_arasan->phy); >> + >> + sdhci_set_clock(host, clock); >> + >> + if (ctrl_phy) >> + phy_power_on(sdhci_arasan->phy); >> +} >> + >> static struct sdhci_ops sdhci_arasan_ops = { >> - .set_clock = sdhci_set_clock, >> + .set_clock = sdhci_arasan_set_clock, >> .get_max_clock = sdhci_pltfm_clk_get_max_clock, >> .get_timeout_clock = sdhci_arasan_get_timeout_clock, >> .set_bus_width = sdhci_set_bus_width, >> -- >> 2.3.7 >> >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > >
Am Mittwoch, 4. Mai 2016, 09:48:55 schrieb Shawn Lin: > ? 2016/4/28 18:38, Ulf Hansson ??: > > On 28 April 2016 at 10:38, Shawn Lin <shawn.lin@rock-chips.com> wrote: > >> commit 61b914eb81f8 ("mmc: sdhci-of-arasan: add phy support for > >> sdhci-of-arasan") introduce phy support for arasan. According to > >> the vendor's databook, we should make sure the phy is in poweroff > >> status before we configure the clk stuff. Otherwise it may cause > >> some IO sample timing issues from the test. And we don't need this > >> extra operation while running in low performance mode since phy > >> doesn't trigger sampling block. > >> > >> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> > > > > Thanks, applied for next! > > Thanks for applying v2 but, could you please drop it and applied v3 > I just send :) . > Because v2 introduces a bug. Set_clock callback will be > called under the protection of spinlock in sdhci_do_set_ios. However > PHY APIs need mutex which fails the kernel's debug check > > BUG: sleeping function called from invalid context at > kernel/locking/mutex.c I think in general you will need to provide a follow-up patch instead of replacing the old version, as Ulf might not want to restructure an already published branch (depends on the maintainer), especially as already other stuff is on top of your patch [0]. Heiko [0] https://git.linaro.org/people/ulf.hansson/mmc.git/shortlog/refs/heads/next > > Kind regards > > Uffe > > > >> --- > >> > >> Changes in v2: > >> - change commit msg title to indicate it's a fix > >> - fix a typo in commmit msg > >> > >> drivers/mmc/host/sdhci-of-arasan.c | 20 +++++++++++++++++++- > >> 1 file changed, 19 insertions(+), 1 deletion(-) > >> > >> diff --git a/drivers/mmc/host/sdhci-of-arasan.c > >> b/drivers/mmc/host/sdhci-of-arasan.c index 2e482b1..20b859e 100644 > >> --- a/drivers/mmc/host/sdhci-of-arasan.c > >> +++ b/drivers/mmc/host/sdhci-of-arasan.c > >> @@ -55,8 +55,26 @@ static unsigned int > >> sdhci_arasan_get_timeout_clock(struct sdhci_host *host)>> > >> return freq; > >> > >> } > >> > >> +static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned > >> int clock) +{ > >> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > >> + struct sdhci_arasan_data *sdhci_arasan = > >> sdhci_pltfm_priv(pltfm_host); + bool ctrl_phy = false; > >> + > >> + if (clock > MMC_HIGH_52_MAX_DTR && > >> (!IS_ERR(sdhci_arasan->phy))) > >> + ctrl_phy = true; > >> + > >> + if (ctrl_phy) > >> + phy_power_off(sdhci_arasan->phy); > >> + > >> + sdhci_set_clock(host, clock); > >> + > >> + if (ctrl_phy) > >> + phy_power_on(sdhci_arasan->phy); > >> +} > >> + > >> > >> static struct sdhci_ops sdhci_arasan_ops = { > >> > >> - .set_clock = sdhci_set_clock, > >> + .set_clock = sdhci_arasan_set_clock, > >> > >> .get_max_clock = sdhci_pltfm_clk_get_max_clock, > >> .get_timeout_clock = sdhci_arasan_get_timeout_clock, > >> .set_bus_width = sdhci_set_bus_width, > >> > >> -- > >> 2.3.7 > >> > >> > >> -- > >> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > >> the body of a message to majordomo@vger.kernel.org > >> More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
? 2016/5/4 16:35, Heiko Stuebner ??: > Am Mittwoch, 4. Mai 2016, 09:48:55 schrieb Shawn Lin: >> ? 2016/4/28 18:38, Ulf Hansson ??: >>> On 28 April 2016 at 10:38, Shawn Lin <shawn.lin@rock-chips.com> wrote: >>>> commit 61b914eb81f8 ("mmc: sdhci-of-arasan: add phy support for >>>> sdhci-of-arasan") introduce phy support for arasan. According to >>>> the vendor's databook, we should make sure the phy is in poweroff >>>> status before we configure the clk stuff. Otherwise it may cause >>>> some IO sample timing issues from the test. And we don't need this >>>> extra operation while running in low performance mode since phy >>>> doesn't trigger sampling block. >>>> >>>> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> >>> >>> Thanks, applied for next! >> >> Thanks for applying v2 but, could you please drop it and applied v3 >> I just send :) . >> Because v2 introduces a bug. Set_clock callback will be >> called under the protection of spinlock in sdhci_do_set_ios. However >> PHY APIs need mutex which fails the kernel's debug check >> >> BUG: sleeping function called from invalid context at >> kernel/locking/mutex.c > > I think in general you will need to provide a follow-up patch instead of > replacing the old version, as Ulf might not want to restructure an already > published branch (depends on the maintainer), especially as already other > stuff is on top of your patch [0]. > Aha.. yes I see other patches on top of mine now. Thanks for reminding it. Ulf, would you mind that I send a new patch to fix it, or you are prone to restructure the next? > > Heiko > > [0] > https://git.linaro.org/people/ulf.hansson/mmc.git/shortlog/refs/heads/next > > > > >>> Kind regards >>> Uffe >>> >>>> --- >>>> >>>> Changes in v2: >>>> - change commit msg title to indicate it's a fix >>>> - fix a typo in commmit msg >>>> >>>> drivers/mmc/host/sdhci-of-arasan.c | 20 +++++++++++++++++++- >>>> 1 file changed, 19 insertions(+), 1 deletion(-) >>>> >>>> diff --git a/drivers/mmc/host/sdhci-of-arasan.c >>>> b/drivers/mmc/host/sdhci-of-arasan.c index 2e482b1..20b859e 100644 >>>> --- a/drivers/mmc/host/sdhci-of-arasan.c >>>> +++ b/drivers/mmc/host/sdhci-of-arasan.c >>>> @@ -55,8 +55,26 @@ static unsigned int >>>> sdhci_arasan_get_timeout_clock(struct sdhci_host *host)>> >>>> return freq; >>>> >>>> } >>>> >>>> +static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned >>>> int clock) +{ >>>> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); >>>> + struct sdhci_arasan_data *sdhci_arasan = >>>> sdhci_pltfm_priv(pltfm_host); + bool ctrl_phy = false; >>>> + >>>> + if (clock > MMC_HIGH_52_MAX_DTR && >>>> (!IS_ERR(sdhci_arasan->phy))) >>>> + ctrl_phy = true; >>>> + >>>> + if (ctrl_phy) >>>> + phy_power_off(sdhci_arasan->phy); >>>> + >>>> + sdhci_set_clock(host, clock); >>>> + >>>> + if (ctrl_phy) >>>> + phy_power_on(sdhci_arasan->phy); >>>> +} >>>> + >>>> >>>> static struct sdhci_ops sdhci_arasan_ops = { >>>> >>>> - .set_clock = sdhci_set_clock, >>>> + .set_clock = sdhci_arasan_set_clock, >>>> >>>> .get_max_clock = sdhci_pltfm_clk_get_max_clock, >>>> .get_timeout_clock = sdhci_arasan_get_timeout_clock, >>>> .set_bus_width = sdhci_set_bus_width, >>>> >>>> -- >>>> 2.3.7 >>>> >>>> >>>> -- >>>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in >>>> the body of a message to majordomo@vger.kernel.org >>>> More majordomo info at http://vger.kernel.org/majordomo-info.html > > > >
On 4 May 2016 at 11:24, Shawn Lin <shawn.lin@rock-chips.com> wrote: > ? 2016/5/4 16:35, Heiko Stuebner ??: >> >> Am Mittwoch, 4. Mai 2016, 09:48:55 schrieb Shawn Lin: >>> >>> ? 2016/4/28 18:38, Ulf Hansson ??: >>>> >>>> On 28 April 2016 at 10:38, Shawn Lin <shawn.lin@rock-chips.com> wrote: >>>>> >>>>> commit 61b914eb81f8 ("mmc: sdhci-of-arasan: add phy support for >>>>> sdhci-of-arasan") introduce phy support for arasan. According to >>>>> the vendor's databook, we should make sure the phy is in poweroff >>>>> status before we configure the clk stuff. Otherwise it may cause >>>>> some IO sample timing issues from the test. And we don't need this >>>>> extra operation while running in low performance mode since phy >>>>> doesn't trigger sampling block. >>>>> >>>>> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> >>>> >>>> >>>> Thanks, applied for next! >>> >>> >>> Thanks for applying v2 but, could you please drop it and applied v3 >>> I just send :) . >>> Because v2 introduces a bug. Set_clock callback will be >>> called under the protection of spinlock in sdhci_do_set_ios. However >>> PHY APIs need mutex which fails the kernel's debug check >>> >>> BUG: sleeping function called from invalid context at >>> kernel/locking/mutex.c >> >> >> I think in general you will need to provide a follow-up patch instead of >> replacing the old version, as Ulf might not want to restructure an already >> published branch (depends on the maintainer), especially as already other >> stuff is on top of your patch [0]. >> > > Aha.. yes I see other patches on top of mine now. Thanks for reminding > it. > > Ulf, would you mind that I send a new patch to fix it, or you are prone > to restructure the next? I re-base my next branch occasionally, as I prefer it to be as clean as possible without obvious bisect issues. In this case there were no conflict by just removing the patch, so I did that, thanks! Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c index 2e482b1..20b859e 100644 --- a/drivers/mmc/host/sdhci-of-arasan.c +++ b/drivers/mmc/host/sdhci-of-arasan.c @@ -55,8 +55,26 @@ static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host *host) return freq; } +static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host); + bool ctrl_phy = false; + + if (clock > MMC_HIGH_52_MAX_DTR && (!IS_ERR(sdhci_arasan->phy))) + ctrl_phy = true; + + if (ctrl_phy) + phy_power_off(sdhci_arasan->phy); + + sdhci_set_clock(host, clock); + + if (ctrl_phy) + phy_power_on(sdhci_arasan->phy); +} + static struct sdhci_ops sdhci_arasan_ops = { - .set_clock = sdhci_set_clock, + .set_clock = sdhci_arasan_set_clock, .get_max_clock = sdhci_pltfm_clk_get_max_clock, .get_timeout_clock = sdhci_arasan_get_timeout_clock, .set_bus_width = sdhci_set_bus_width,
commit 61b914eb81f8 ("mmc: sdhci-of-arasan: add phy support for sdhci-of-arasan") introduce phy support for arasan. According to the vendor's databook, we should make sure the phy is in poweroff status before we configure the clk stuff. Otherwise it may cause some IO sample timing issues from the test. And we don't need this extra operation while running in low performance mode since phy doesn't trigger sampling block. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> --- Changes in v2: - change commit msg title to indicate it's a fix - fix a typo in commmit msg drivers/mmc/host/sdhci-of-arasan.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-)