| Message ID | 1468547691-4525-1-git-send-email-jh80.chung@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
在 2016/7/15 9:54, Jaehoon Chung 写道: > This flag needs to use the trim/discard/erase commands. > dwmmc controller enables this flag by default. > > Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> > --- > drivers/mmc/host/dw_mmc.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c > index 9fab5ed..d16de19 100644 > --- a/drivers/mmc/host/dw_mmc.c > +++ b/drivers/mmc/host/dw_mmc.c > @@ -2604,6 +2604,12 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) > if (host->pdata->caps) > mmc->caps = host->pdata->caps; > > + /* > + * Support MMC_CAP_ERASE by default. > + * It needs to use trim/discard/erase commands. > + */ > + mmc->caps |= MMC_CAP_ERASE; > + > if (host->pdata->pm_caps) > mmc->pm_caps = host->pdata->pm_caps; > >
Hi Jaehoon On 07/15/2016 07:24 AM, Jaehoon Chung wrote: > This flag needs to use the trim/discard/erase commands. > dwmmc controller enables this flag by default. > > Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> > Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> > --- > drivers/mmc/host/dw_mmc.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c > index 9fab5ed..d16de19 100644 > --- a/drivers/mmc/host/dw_mmc.c > +++ b/drivers/mmc/host/dw_mmc.c > @@ -2604,6 +2604,12 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) > if (host->pdata->caps) > mmc->caps = host->pdata->caps; > > + /* > + * Support MMC_CAP_ERASE by default. > + * It needs to use trim/discard/erase commands. > + */ > + mmc->caps |= MMC_CAP_ERASE; > + Just a thought, probably this should be move to mmc_of_parse() and let the board/platform configure this via device-tree. > if (host->pdata->pm_caps) > mmc->pm_caps = host->pdata->pm_caps; > > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 07/15/2016 01:38 PM, Alim Akhtar wrote: > Hi Jaehoon > > On 07/15/2016 07:24 AM, Jaehoon Chung wrote: >> This flag needs to use the trim/discard/erase commands. >> dwmmc controller enables this flag by default. >> >> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> >> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> >> --- >> drivers/mmc/host/dw_mmc.c | 6 ++++++ >> 1 file changed, 6 insertions(+) >> >> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c >> index 9fab5ed..d16de19 100644 >> --- a/drivers/mmc/host/dw_mmc.c >> +++ b/drivers/mmc/host/dw_mmc.c >> @@ -2604,6 +2604,12 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) >> if (host->pdata->caps) >> mmc->caps = host->pdata->caps; >> >> + /* >> + * Support MMC_CAP_ERASE by default. >> + * It needs to use trim/discard/erase commands. >> + */ >> + mmc->caps |= MMC_CAP_ERASE; >> + > Just a thought, probably this should be move to mmc_of_parse() and let the board/platform configure this via device-tree. I don't think so...I think best solution is supported by default. I didn't see the platform/board that don't need to use MMC_CAP_ERASE. If MMC_CAP_ERASE should be moved into mmc_of_parse(), it also needs to modify the almost all device-trees. If setting by default will have side effect, i will consider about abandoning this patch or adding other things to prevent side-effect. :) Best Regards, Jaehoon Chung > >> if (host->pdata->pm_caps) >> mmc->pm_caps = host->pdata->pm_caps; >> >> > > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 07/15/2016 10:21 AM, Jaehoon Chung wrote: > On 07/15/2016 01:38 PM, Alim Akhtar wrote: >> Hi Jaehoon >> >> On 07/15/2016 07:24 AM, Jaehoon Chung wrote: >>> This flag needs to use the trim/discard/erase commands. >>> dwmmc controller enables this flag by default. >>> >>> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> >>> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> >>> --- >>> drivers/mmc/host/dw_mmc.c | 6 ++++++ >>> 1 file changed, 6 insertions(+) >>> >>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c >>> index 9fab5ed..d16de19 100644 >>> --- a/drivers/mmc/host/dw_mmc.c >>> +++ b/drivers/mmc/host/dw_mmc.c >>> @@ -2604,6 +2604,12 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) >>> if (host->pdata->caps) >>> mmc->caps = host->pdata->caps; >>> >>> + /* >>> + * Support MMC_CAP_ERASE by default. >>> + * It needs to use trim/discard/erase commands. >>> + */ >>> + mmc->caps |= MMC_CAP_ERASE; >>> + >> Just a thought, probably this should be move to mmc_of_parse() and let the board/platform configure this via device-tree. > > I don't think so...I think best solution is supported by default. > I didn't see the platform/board that don't need to use MMC_CAP_ERASE. > > If MMC_CAP_ERASE should be moved into mmc_of_parse(), it also needs to modify the almost all device-trees. > If setting by default will have side effect, > i will consider about abandoning this patch or adding other things to prevent side-effect. :) > My point was, MMC_CAP_ERASE is a generic capability not dw_mmc specific. Suppose some other controller wants to enable this, then they need to add this CAP to their files/drivers. And probably thats why mmc_of_parse() was introduced at common place. Since you are adding this, lets add in a common place for a large use. Anyway this was just a though, if you don't like this, I am ok. :-) > Best Regards, > Jaehoon Chung > >> >>> if (host->pdata->pm_caps) >>> mmc->pm_caps = host->pdata->pm_caps; >>> >>> >> >> > > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 07/15/2016 05:03 PM, Jaehoon Chung wrote: > Hi Alim > > 2016-07-15 19:38 GMT+09:00 Alim Akhtar <alim.akhtar@samsung.com > <mailto:alim.akhtar@samsung.com>>: > > > > On 07/15/2016 10:21 AM, Jaehoon Chung wrote: > > On 07/15/2016 01:38 PM, Alim Akhtar wrote: > > Hi Jaehoon > > On 07/15/2016 07:24 AM, Jaehoon Chung wrote: > > This flag needs to use the trim/discard/erase commands. > dwmmc controller enables this flag by default. > > Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com > <mailto:jh80.chung@samsung.com>> > Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com > <mailto:shawn.lin@rock-chips.com>> > --- > drivers/mmc/host/dw_mmc.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/mmc/host/dw_mmc.c > b/drivers/mmc/host/dw_mmc.c > index 9fab5ed..d16de19 100644 > --- a/drivers/mmc/host/dw_mmc.c > +++ b/drivers/mmc/host/dw_mmc.c > @@ -2604,6 +2604,12 @@ static int > dw_mci_init_slot(struct dw_mci *host, unsigned int id) > if (host->pdata->caps) > mmc->caps = host->pdata->caps; > > + /* > + * Support MMC_CAP_ERASE by default. > + * It needs to use trim/discard/erase commands. > + */ > + mmc->caps |= MMC_CAP_ERASE; > + > > Just a thought, probably this should be move to > mmc_of_parse() and let the board/platform configure this via > device-tree. > > > I don't think so...I think best solution is supported by default. > I didn't see the platform/board that don't need to use > MMC_CAP_ERASE. > > If MMC_CAP_ERASE should be moved into mmc_of_parse(), it also > needs to modify the almost all device-trees. > If setting by default will have side effect, > i will consider about abandoning this patch or adding other > things to prevent side-effect. :) > > My point was, MMC_CAP_ERASE is a generic capability not dw_mmc > specific. Suppose some other controller wants to enable this, then > they need to add this CAP to their files/drivers. And probably thats > why mmc_of_parse() was introduced at common place. > > > I understood what you said..If I understood right, it can be located > into mmc_of_parse(), right? > Then other drivers are also used by default..but some SoCs can have a > problem. No, if someone wants they should pass mmc-cap-erase and enable it. In case those SoC has some issue with ERASE command, then they will not set it in their DTS file. And ofcourse to enable it, dts files need to be modified. > So if it is located into mmc_of_parse(), i will add the > "mmc-cap-no-erase" as property. > I don't see a use case for this, if you can explain more? > How about this? > > Best Regards, > Jaehoon Chung > > > Since you are adding this, lets add in a common place for a large use. > Anyway this was just a though, if you don't like this, I am ok. :-) > > > Best Regards, > Jaehoon Chung > > > if (host->pdata->pm_caps) > mmc->pm_caps = host->pdata->pm_caps; > > > > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@vger.kernel.org > <mailto:majordomo@vger.kernel.org> > More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 07/15/2016 08:46 PM, Alim Akhtar wrote: > > > On 07/15/2016 05:03 PM, Jaehoon Chung wrote: >> Hi Alim >> >> 2016-07-15 19:38 GMT+09:00 Alim Akhtar <alim.akhtar@samsung.com >> <mailto:alim.akhtar@samsung.com>>: >> >> >> >> On 07/15/2016 10:21 AM, Jaehoon Chung wrote: >> >> On 07/15/2016 01:38 PM, Alim Akhtar wrote: >> >> Hi Jaehoon >> >> On 07/15/2016 07:24 AM, Jaehoon Chung wrote: >> >> This flag needs to use the trim/discard/erase commands. >> dwmmc controller enables this flag by default. >> >> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com >> <mailto:jh80.chung@samsung.com>> >> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com >> <mailto:shawn.lin@rock-chips.com>> >> --- >> drivers/mmc/host/dw_mmc.c | 6 ++++++ >> 1 file changed, 6 insertions(+) >> >> diff --git a/drivers/mmc/host/dw_mmc.c >> b/drivers/mmc/host/dw_mmc.c >> index 9fab5ed..d16de19 100644 >> --- a/drivers/mmc/host/dw_mmc.c >> +++ b/drivers/mmc/host/dw_mmc.c >> @@ -2604,6 +2604,12 @@ static int >> dw_mci_init_slot(struct dw_mci *host, unsigned int id) >> if (host->pdata->caps) >> mmc->caps = host->pdata->caps; >> >> + /* >> + * Support MMC_CAP_ERASE by default. >> + * It needs to use trim/discard/erase commands. >> + */ >> + mmc->caps |= MMC_CAP_ERASE; >> + >> >> Just a thought, probably this should be move to >> mmc_of_parse() and let the board/platform configure this via >> device-tree. >> >> >> I don't think so...I think best solution is supported by default. >> I didn't see the platform/board that don't need to use >> MMC_CAP_ERASE. >> >> If MMC_CAP_ERASE should be moved into mmc_of_parse(), it also >> needs to modify the almost all device-trees. >> If setting by default will have side effect, >> i will consider about abandoning this patch or adding other >> things to prevent side-effect. :) >> >> My point was, MMC_CAP_ERASE is a generic capability not dw_mmc >> specific. Suppose some other controller wants to enable this, then >> they need to add this CAP to their files/drivers. And probably thats >> why mmc_of_parse() was introduced at common place. >> >> >> I understood what you said..If I understood right, it can be located >> into mmc_of_parse(), right? >> Then other drivers are also used by default..but some SoCs can have a >> problem. > No, if someone wants they should pass mmc-cap-erase and enable it. > In case those SoC has some issue with ERASE command, then they will not set it in their DTS file. > And ofcourse to enable it, dts files need to be modified. Well..I understood exactly what you mean..but i don't want to put this into mmc_of_parse(). I will have a time to think what's better. Thank you for feedback! :) Best Regards, Jaehoon Chung > >> So if it is located into mmc_of_parse(), i will add the >> "mmc-cap-no-erase" as property. >> > I don't see a use case for this, if you can explain more? > >> How about this? >> >> Best Regards, >> Jaehoon Chung >> >> >> Since you are adding this, lets add in a common place for a large use. >> Anyway this was just a though, if you don't like this, I am ok. :-) >> >> >> Best Regards, >> Jaehoon Chung >> >> >> if (host->pdata->pm_caps) >> mmc->pm_caps = host->pdata->pm_caps; >> >> >> >> >> >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in >> the body of a message to majordomo@vger.kernel.org >> <mailto:majordomo@vger.kernel.org> >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> >> > > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 15 July 2016 at 03:54, Jaehoon Chung <jh80.chung@samsung.com> wrote: > This flag needs to use the trim/discard/erase commands. > dwmmc controller enables this flag by default. > > Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> As we are close to the merge window, I picked this up directly instead of you having to send me a PR. Thanks, applied for next! Kind regards Uffe > --- > drivers/mmc/host/dw_mmc.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c > index 9fab5ed..d16de19 100644 > --- a/drivers/mmc/host/dw_mmc.c > +++ b/drivers/mmc/host/dw_mmc.c > @@ -2604,6 +2604,12 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) > if (host->pdata->caps) > mmc->caps = host->pdata->caps; > > + /* > + * Support MMC_CAP_ERASE by default. > + * It needs to use trim/discard/erase commands. > + */ > + mmc->caps |= MMC_CAP_ERASE; > + > if (host->pdata->pm_caps) > mmc->pm_caps = host->pdata->pm_caps; > > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 9fab5ed..d16de19 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -2604,6 +2604,12 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) if (host->pdata->caps) mmc->caps = host->pdata->caps; + /* + * Support MMC_CAP_ERASE by default. + * It needs to use trim/discard/erase commands. + */ + mmc->caps |= MMC_CAP_ERASE; + if (host->pdata->pm_caps) mmc->pm_caps = host->pdata->pm_caps;
This flag needs to use the trim/discard/erase commands. dwmmc controller enables this flag by default. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> --- drivers/mmc/host/dw_mmc.c | 6 ++++++ 1 file changed, 6 insertions(+)