| Message ID | 1499765917-228806-1-git-send-email-shawn.lin@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Shawn, On 07/11/2017 06:38 PM, Shawn Lin wrote: > From: Addy Ke <addy.ke@rock-chips.com> > > Per the databook of designware mmc controller 2.70a, table 3-2, cmd > done interrupt should be fired as soon as the the cmd is sent via > cmd line. And the response timeout interrupt should be generated > unconditioinally as well if the controller doesn't receive the resp. > However that doesn't seem to meet the fact of rockchip specified Soc > platforms using dwmmc. We have continuously found the the cmd done or > response timeout interrupt missed somehow which took us a long time to > understand what was happening. Finally we narrow down the root to > the reconstruction of sample circuit for dwmmc IP introduced by > rockchip and the buggy design sweeps over all the existing rockchip > Socs using dwmmc disastrously. > > It seems no way to work around this bug without the proper break-out > mechanism so that we seek for a parallel pair the same as the handling > for missing data response timeout, namely dto timer. Adding this cto > timer seems easily to handle this bug but it's hard to restrict the code > under the rockchip specified context. So after merging this patch, it > sets up the cto timer for all the platforms using dwmmc IP which isn't > ideal but at least we don't advertise new quirk here. Fortunately, no > obvious performance regression was found by test and the pre-existing > similar catch-all timer for sdhci has proved it's an acceptant way to > make the code as robust as possible. > > Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196321 > Signed-off-by: Addy Ke <addy.ke@rock-chips.com> > Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> > [shawn.lin: rewrite the code and the commit msg throughout] > Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Will pick this after testing with my targets. Best Regards, Jaehoon Chung > > --- > > drivers/mmc/host/dw_mmc.c | 48 +++++++++++++++++++++++++++++++++++++++++++++++ > drivers/mmc/host/dw_mmc.h | 2 ++ > 2 files changed, 50 insertions(+) > > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c > index a9dfb26..2f6121e 100644 > --- a/drivers/mmc/host/dw_mmc.c > +++ b/drivers/mmc/host/dw_mmc.c > @@ -398,6 +398,21 @@ static u32 dw_mci_prep_stop_abort(struct dw_mci *host, struct mmc_command *cmd) > return cmdr; > } > > +static inline void dw_mci_set_cto(struct dw_mci *host) > +{ > + unsigned int cto_clks; > + unsigned int cto_ms; > + > + cto_clks = mci_readl(host, TMOUT) & 0xff; > + cto_ms = DIV_ROUND_UP(cto_clks, host->bus_hz / 1000); > + > + /* add a bit spare time */ > + cto_ms += 10; > + > + mod_timer(&host->cto_timer, > + jiffies + msecs_to_jiffies(cto_ms) + 1); > +} > + > static void dw_mci_start_command(struct dw_mci *host, > struct mmc_command *cmd, u32 cmd_flags) > { > @@ -410,6 +425,10 @@ static void dw_mci_start_command(struct dw_mci *host, > wmb(); /* drain writebuffer */ > dw_mci_wait_while_busy(host, cmd_flags); > > + /* response expected command only */ > + if (cmd_flags & SDMMC_CMD_RESP_EXP) > + dw_mci_set_cto(host); > + > mci_writel(host, CMD, cmd_flags | SDMMC_CMD_START); > } > > @@ -2599,6 +2618,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) > } > > if (pending & DW_MCI_CMD_ERROR_FLAGS) { > + del_timer(&host->cto_timer); > mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS); > host->cmd_status = pending; > smp_wmb(); /* drain writebuffer */ > @@ -2642,6 +2662,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) > } > > if (pending & SDMMC_INT_CMD_DONE) { > + del_timer(&host->cto_timer); > mci_writel(host, RINTSTS, SDMMC_INT_CMD_DONE); > dw_mci_cmd_interrupt(host, pending); > } > @@ -2914,6 +2935,30 @@ static void dw_mci_cmd11_timer(unsigned long arg) > tasklet_schedule(&host->tasklet); > } > > +static void dw_mci_cto_timer(unsigned long arg) > +{ > + struct dw_mci *host = (struct dw_mci *)arg; > + > + switch (host->state) { > + case STATE_SENDING_CMD11: > + case STATE_SENDING_CMD: > + case STATE_SENDING_STOP: > + /* > + * If CMD_DONE interrupt does NOT come in sending command > + * state, we should notify the driver to terminate current > + * transfer and report a command timeout to the core. > + */ > + host->cmd_status = SDMMC_INT_RTO; > + set_bit(EVENT_CMD_COMPLETE, &host->pending_events); > + tasklet_schedule(&host->tasklet); > + break; > + default: > + dev_warn(host->dev, "Unexpected command timeout, state %d\n", > + host->state); > + break; > + } > +} > + > static void dw_mci_dto_timer(unsigned long arg) > { > struct dw_mci *host = (struct dw_mci *)arg; > @@ -3085,6 +3130,9 @@ int dw_mci_probe(struct dw_mci *host) > setup_timer(&host->cmd11_timer, > dw_mci_cmd11_timer, (unsigned long)host); > > + setup_timer(&host->cto_timer, > + dw_mci_cto_timer, (unsigned long)host); > + > setup_timer(&host->dto_timer, > dw_mci_dto_timer, (unsigned long)host); > > diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h > index 75da375..4210927 100644 > --- a/drivers/mmc/host/dw_mmc.h > +++ b/drivers/mmc/host/dw_mmc.h > @@ -126,6 +126,7 @@ struct dw_mci_dma_slave { > * @irq: The irq value to be passed to request_irq. > * @sdio_id0: Number of slot0 in the SDIO interrupt registers. > * @cmd11_timer: Timer for SD3.0 voltage switch over scheme. > + * @cto_timer: Timer for broken command transfer over scheme. > * @dto_timer: Timer for broken data transfer over scheme. > * > * Locking > @@ -232,6 +233,7 @@ struct dw_mci { > int sdio_id0; > > struct timer_list cmd11_timer; > + struct timer_list cto_timer; > struct timer_list dto_timer; > }; > > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index a9dfb26..2f6121e 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -398,6 +398,21 @@ static u32 dw_mci_prep_stop_abort(struct dw_mci *host, struct mmc_command *cmd) return cmdr; } +static inline void dw_mci_set_cto(struct dw_mci *host) +{ + unsigned int cto_clks; + unsigned int cto_ms; + + cto_clks = mci_readl(host, TMOUT) & 0xff; + cto_ms = DIV_ROUND_UP(cto_clks, host->bus_hz / 1000); + + /* add a bit spare time */ + cto_ms += 10; + + mod_timer(&host->cto_timer, + jiffies + msecs_to_jiffies(cto_ms) + 1); +} + static void dw_mci_start_command(struct dw_mci *host, struct mmc_command *cmd, u32 cmd_flags) { @@ -410,6 +425,10 @@ static void dw_mci_start_command(struct dw_mci *host, wmb(); /* drain writebuffer */ dw_mci_wait_while_busy(host, cmd_flags); + /* response expected command only */ + if (cmd_flags & SDMMC_CMD_RESP_EXP) + dw_mci_set_cto(host); + mci_writel(host, CMD, cmd_flags | SDMMC_CMD_START); } @@ -2599,6 +2618,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) } if (pending & DW_MCI_CMD_ERROR_FLAGS) { + del_timer(&host->cto_timer); mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS); host->cmd_status = pending; smp_wmb(); /* drain writebuffer */ @@ -2642,6 +2662,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) } if (pending & SDMMC_INT_CMD_DONE) { + del_timer(&host->cto_timer); mci_writel(host, RINTSTS, SDMMC_INT_CMD_DONE); dw_mci_cmd_interrupt(host, pending); } @@ -2914,6 +2935,30 @@ static void dw_mci_cmd11_timer(unsigned long arg) tasklet_schedule(&host->tasklet); } +static void dw_mci_cto_timer(unsigned long arg) +{ + struct dw_mci *host = (struct dw_mci *)arg; + + switch (host->state) { + case STATE_SENDING_CMD11: + case STATE_SENDING_CMD: + case STATE_SENDING_STOP: + /* + * If CMD_DONE interrupt does NOT come in sending command + * state, we should notify the driver to terminate current + * transfer and report a command timeout to the core. + */ + host->cmd_status = SDMMC_INT_RTO; + set_bit(EVENT_CMD_COMPLETE, &host->pending_events); + tasklet_schedule(&host->tasklet); + break; + default: + dev_warn(host->dev, "Unexpected command timeout, state %d\n", + host->state); + break; + } +} + static void dw_mci_dto_timer(unsigned long arg) { struct dw_mci *host = (struct dw_mci *)arg; @@ -3085,6 +3130,9 @@ int dw_mci_probe(struct dw_mci *host) setup_timer(&host->cmd11_timer, dw_mci_cmd11_timer, (unsigned long)host); + setup_timer(&host->cto_timer, + dw_mci_cto_timer, (unsigned long)host); + setup_timer(&host->dto_timer, dw_mci_dto_timer, (unsigned long)host); diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h index 75da375..4210927 100644 --- a/drivers/mmc/host/dw_mmc.h +++ b/drivers/mmc/host/dw_mmc.h @@ -126,6 +126,7 @@ struct dw_mci_dma_slave { * @irq: The irq value to be passed to request_irq. * @sdio_id0: Number of slot0 in the SDIO interrupt registers. * @cmd11_timer: Timer for SD3.0 voltage switch over scheme. + * @cto_timer: Timer for broken command transfer over scheme. * @dto_timer: Timer for broken data transfer over scheme. * * Locking @@ -232,6 +233,7 @@ struct dw_mci { int sdio_id0; struct timer_list cmd11_timer; + struct timer_list cto_timer; struct timer_list dto_timer; };