| Message ID | 1505958774-14410-1-git-send-email-chaotian.jing@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Sep 21, 2017 at 3:52 AM, Chaotian Jing <chaotian.jing@mediatek.com> wrote: > +- mediatek,latch-ck: Some projects do not support enhance_rx, need set correct latch-ck to avoid data crc > + error caused by stop clock(fifo full) I think I wrote elsewhere: replace "projects" with "systems" or "SoCs". Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, 2017-09-22 at 13:25 +0200, Linus Walleij wrote: > On Thu, Sep 21, 2017 at 3:52 AM, Chaotian Jing > <chaotian.jing@mediatek.com> wrote: > > > +- mediatek,latch-ck: Some projects do not support enhance_rx, need set correct latch-ck to avoid data crc > > + error caused by stop clock(fifo full) > > I think I wrote elsewhere: replace "projects" with "systems" or "SoCs". Sorry about that, will change to SoCs at v3. > > Yours, > Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt index 4182ea3..405cd06 100644 --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt and the properties used by the msdc driver. Required properties: -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" +- compatible: value should be either of the following. + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 +- reg: physical base address of the controller and length - interrupts: Should contain MSDC interrupt number -- clocks: MSDC source clock, HCLK -- clock-names: "source", "hclk" +- clocks: MSDC source clock, HCLK, source_cg +- clock-names: "source", "hclk", "source_cg" - pinctrl-names: should be "default", "state_uhs" - pinctrl-0: should contain default/high speed pin ctrl - pinctrl-1: should contain uhs mode pin ctrl @@ -30,6 +35,8 @@ Optional properties: - mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection If present,HS400 command responses are sampled on rising edges. If not present,HS400 command responses are sampled on falling edges. +- mediatek,latch-ck: Some projects do not support enhance_rx, need set correct latch-ck to avoid data crc + error caused by stop clock(fifo full) Examples: mmc0: mmc@11230000 {
Change the comptiable for support of multi-platform Add description for reg Add description for source_cg Add description for mediatek,latch-ck Note that source_cg and mediatek,latch-ck are optional for some projects, eg, MT2701 do not have source_cg, and MT2712 do not need mediatek,latch-ck Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> --- Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-)