Message ID | 1508414653-15030-1-git-send-email-adrian.hunter@intel.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 19 October 2017 at 14:04, Adrian Hunter <adrian.hunter@intel.com> wrote: > We keep PCI Ids in sdhci-pci.h and the O2-specific definitions belong in > sdhci-pci-o2micro.c. Move those definitions accordingly. Remove unused O2 > definitions in sdhci-pci-core.c. The 3 o2micro external function > declarations might as well be in sdhci-pci.h as well, so move them there > and get rid of sdhci-pci-o2micro.h entirely. > > Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Thanks, applied for next! Kind regards Uffe > --- > drivers/mmc/host/sdhci-pci-core.c | 10 ----- > drivers/mmc/host/sdhci-pci-o2micro.c | 35 ++++++++++++++++- > drivers/mmc/host/sdhci-pci-o2micro.h | 73 ------------------------------------ > drivers/mmc/host/sdhci-pci.h | 12 ++++++ > 4 files changed, 46 insertions(+), 84 deletions(-) > delete mode 100644 drivers/mmc/host/sdhci-pci-o2micro.h > > diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c > index e854ee5d7f4a..3e4f04fd5175 100644 > --- a/drivers/mmc/host/sdhci-pci-core.c > +++ b/drivers/mmc/host/sdhci-pci-core.c > @@ -32,7 +32,6 @@ > > #include "sdhci.h" > #include "sdhci-pci.h" > -#include "sdhci-pci-o2micro.h" > > static int sdhci_pci_enable_dma(struct sdhci_host *host); > static void sdhci_pci_hw_reset(struct sdhci_host *host); > @@ -798,15 +797,6 @@ static int intel_mrfld_mmc_probe_slot(struct sdhci_pci_slot *slot) > .probe_slot = intel_mrfld_mmc_probe_slot, > }; > > -/* O2Micro extra registers */ > -#define O2_SD_LOCK_WP 0xD3 > -#define O2_SD_MULTI_VCC3V 0xEE > -#define O2_SD_CLKREQ 0xEC > -#define O2_SD_CAPS 0xE0 > -#define O2_SD_ADMA1 0xE2 > -#define O2_SD_ADMA2 0xE7 > -#define O2_SD_INF_MOD 0xF1 > - > static int jmicron_pmos(struct sdhci_pci_chip *chip, int on) > { > u8 scratch; > diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c > index 14273ca00641..555970a29c94 100644 > --- a/drivers/mmc/host/sdhci-pci-o2micro.c > +++ b/drivers/mmc/host/sdhci-pci-o2micro.c > @@ -19,7 +19,40 @@ > > #include "sdhci.h" > #include "sdhci-pci.h" > -#include "sdhci-pci-o2micro.h" > + > +/* > + * O2Micro device registers > + */ > + > +#define O2_SD_MISC_REG5 0x64 > +#define O2_SD_LD0_CTRL 0x68 > +#define O2_SD_DEV_CTRL 0x88 > +#define O2_SD_LOCK_WP 0xD3 > +#define O2_SD_TEST_REG 0xD4 > +#define O2_SD_FUNC_REG0 0xDC > +#define O2_SD_MULTI_VCC3V 0xEE > +#define O2_SD_CLKREQ 0xEC > +#define O2_SD_CAPS 0xE0 > +#define O2_SD_ADMA1 0xE2 > +#define O2_SD_ADMA2 0xE7 > +#define O2_SD_INF_MOD 0xF1 > +#define O2_SD_MISC_CTRL4 0xFC > +#define O2_SD_TUNING_CTRL 0x300 > +#define O2_SD_PLL_SETTING 0x304 > +#define O2_SD_CLK_SETTING 0x328 > +#define O2_SD_CAP_REG2 0x330 > +#define O2_SD_CAP_REG0 0x334 > +#define O2_SD_UHS1_CAP_SETTING 0x33C > +#define O2_SD_DELAY_CTRL 0x350 > +#define O2_SD_UHS2_L1_CTRL 0x35C > +#define O2_SD_FUNC_REG3 0x3E0 > +#define O2_SD_FUNC_REG4 0x3E4 > +#define O2_SD_LED_ENABLE BIT(6) > +#define O2_SD_FREG0_LEDOFF BIT(13) > +#define O2_SD_FREG4_ENABLE_CLK_SET BIT(22) > + > +#define O2_SD_VENDOR_SETTING 0x110 > +#define O2_SD_VENDOR_SETTING2 0x1C8 > > static void o2_pci_set_baseclk(struct sdhci_pci_chip *chip, u32 value) > { > diff --git a/drivers/mmc/host/sdhci-pci-o2micro.h b/drivers/mmc/host/sdhci-pci-o2micro.h > deleted file mode 100644 > index 770f53857211..000000000000 > --- a/drivers/mmc/host/sdhci-pci-o2micro.h > +++ /dev/null > @@ -1,73 +0,0 @@ > -/* > - * Copyright (C) 2013 BayHub Technology Ltd. > - * > - * Authors: Peter Guo <peter.guo@bayhubtech.com> > - * Adam Lee <adam.lee@canonical.com> > - * > - * This software is licensed under the terms of the GNU General Public > - * License version 2, as published by the Free Software Foundation, and > - * may be copied, distributed, and modified under those terms. > - * > - * This program is distributed in the hope that it will be useful, > - * but WITHOUT ANY WARRANTY; without even the implied warranty of > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > - * GNU General Public License for more details. > - * > - */ > - > -#ifndef __SDHCI_PCI_O2MICRO_H > -#define __SDHCI_PCI_O2MICRO_H > - > -#include "sdhci-pci.h" > - > -/* > - * O2Micro device IDs > - */ > - > -#define PCI_DEVICE_ID_O2_SDS0 0x8420 > -#define PCI_DEVICE_ID_O2_SDS1 0x8421 > -#define PCI_DEVICE_ID_O2_FUJIN2 0x8520 > -#define PCI_DEVICE_ID_O2_SEABIRD0 0x8620 > -#define PCI_DEVICE_ID_O2_SEABIRD1 0x8621 > - > -/* > - * O2Micro device registers > - */ > - > -#define O2_SD_MISC_REG5 0x64 > -#define O2_SD_LD0_CTRL 0x68 > -#define O2_SD_DEV_CTRL 0x88 > -#define O2_SD_LOCK_WP 0xD3 > -#define O2_SD_TEST_REG 0xD4 > -#define O2_SD_FUNC_REG0 0xDC > -#define O2_SD_MULTI_VCC3V 0xEE > -#define O2_SD_CLKREQ 0xEC > -#define O2_SD_CAPS 0xE0 > -#define O2_SD_ADMA1 0xE2 > -#define O2_SD_ADMA2 0xE7 > -#define O2_SD_INF_MOD 0xF1 > -#define O2_SD_MISC_CTRL4 0xFC > -#define O2_SD_TUNING_CTRL 0x300 > -#define O2_SD_PLL_SETTING 0x304 > -#define O2_SD_CLK_SETTING 0x328 > -#define O2_SD_CAP_REG2 0x330 > -#define O2_SD_CAP_REG0 0x334 > -#define O2_SD_UHS1_CAP_SETTING 0x33C > -#define O2_SD_DELAY_CTRL 0x350 > -#define O2_SD_UHS2_L1_CTRL 0x35C > -#define O2_SD_FUNC_REG3 0x3E0 > -#define O2_SD_FUNC_REG4 0x3E4 > -#define O2_SD_LED_ENABLE BIT(6) > -#define O2_SD_FREG0_LEDOFF BIT(13) > -#define O2_SD_FREG4_ENABLE_CLK_SET BIT(22) > - > -#define O2_SD_VENDOR_SETTING 0x110 > -#define O2_SD_VENDOR_SETTING2 0x1C8 > - > -extern int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot); > - > -extern int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip); > - > -extern int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip); > - > -#endif /* __SDHCI_PCI_O2MICRO_H */ > diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h > index 3c1dd79fdbde..063506cc2ca9 100644 > --- a/drivers/mmc/host/sdhci-pci.h > +++ b/drivers/mmc/host/sdhci-pci.h > @@ -5,6 +5,12 @@ > * PCI device IDs, sub IDs > */ > > +#define PCI_DEVICE_ID_O2_SDS0 0x8420 > +#define PCI_DEVICE_ID_O2_SDS1 0x8421 > +#define PCI_DEVICE_ID_O2_FUJIN2 0x8520 > +#define PCI_DEVICE_ID_O2_SEABIRD0 0x8620 > +#define PCI_DEVICE_ID_O2_SEABIRD1 0x8621 > + > #define PCI_DEVICE_ID_INTEL_PCH_SDIO0 0x8809 > #define PCI_DEVICE_ID_INTEL_PCH_SDIO1 0x880a > #define PCI_DEVICE_ID_INTEL_BYT_EMMC 0x0f14 > @@ -164,4 +170,10 @@ static inline void *sdhci_pci_priv(struct sdhci_pci_slot *slot) > int sdhci_pci_resume_host(struct sdhci_pci_chip *chip); > #endif > > +int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot); > +int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip); > +#ifdef CONFIG_PM_SLEEP > +int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip); > +#endif > + > #endif /* __SDHCI_PCI_H */ > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index e854ee5d7f4a..3e4f04fd5175 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -32,7 +32,6 @@ #include "sdhci.h" #include "sdhci-pci.h" -#include "sdhci-pci-o2micro.h" static int sdhci_pci_enable_dma(struct sdhci_host *host); static void sdhci_pci_hw_reset(struct sdhci_host *host); @@ -798,15 +797,6 @@ static int intel_mrfld_mmc_probe_slot(struct sdhci_pci_slot *slot) .probe_slot = intel_mrfld_mmc_probe_slot, }; -/* O2Micro extra registers */ -#define O2_SD_LOCK_WP 0xD3 -#define O2_SD_MULTI_VCC3V 0xEE -#define O2_SD_CLKREQ 0xEC -#define O2_SD_CAPS 0xE0 -#define O2_SD_ADMA1 0xE2 -#define O2_SD_ADMA2 0xE7 -#define O2_SD_INF_MOD 0xF1 - static int jmicron_pmos(struct sdhci_pci_chip *chip, int on) { u8 scratch; diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c index 14273ca00641..555970a29c94 100644 --- a/drivers/mmc/host/sdhci-pci-o2micro.c +++ b/drivers/mmc/host/sdhci-pci-o2micro.c @@ -19,7 +19,40 @@ #include "sdhci.h" #include "sdhci-pci.h" -#include "sdhci-pci-o2micro.h" + +/* + * O2Micro device registers + */ + +#define O2_SD_MISC_REG5 0x64 +#define O2_SD_LD0_CTRL 0x68 +#define O2_SD_DEV_CTRL 0x88 +#define O2_SD_LOCK_WP 0xD3 +#define O2_SD_TEST_REG 0xD4 +#define O2_SD_FUNC_REG0 0xDC +#define O2_SD_MULTI_VCC3V 0xEE +#define O2_SD_CLKREQ 0xEC +#define O2_SD_CAPS 0xE0 +#define O2_SD_ADMA1 0xE2 +#define O2_SD_ADMA2 0xE7 +#define O2_SD_INF_MOD 0xF1 +#define O2_SD_MISC_CTRL4 0xFC +#define O2_SD_TUNING_CTRL 0x300 +#define O2_SD_PLL_SETTING 0x304 +#define O2_SD_CLK_SETTING 0x328 +#define O2_SD_CAP_REG2 0x330 +#define O2_SD_CAP_REG0 0x334 +#define O2_SD_UHS1_CAP_SETTING 0x33C +#define O2_SD_DELAY_CTRL 0x350 +#define O2_SD_UHS2_L1_CTRL 0x35C +#define O2_SD_FUNC_REG3 0x3E0 +#define O2_SD_FUNC_REG4 0x3E4 +#define O2_SD_LED_ENABLE BIT(6) +#define O2_SD_FREG0_LEDOFF BIT(13) +#define O2_SD_FREG4_ENABLE_CLK_SET BIT(22) + +#define O2_SD_VENDOR_SETTING 0x110 +#define O2_SD_VENDOR_SETTING2 0x1C8 static void o2_pci_set_baseclk(struct sdhci_pci_chip *chip, u32 value) { diff --git a/drivers/mmc/host/sdhci-pci-o2micro.h b/drivers/mmc/host/sdhci-pci-o2micro.h deleted file mode 100644 index 770f53857211..000000000000 --- a/drivers/mmc/host/sdhci-pci-o2micro.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * Copyright (C) 2013 BayHub Technology Ltd. - * - * Authors: Peter Guo <peter.guo@bayhubtech.com> - * Adam Lee <adam.lee@canonical.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __SDHCI_PCI_O2MICRO_H -#define __SDHCI_PCI_O2MICRO_H - -#include "sdhci-pci.h" - -/* - * O2Micro device IDs - */ - -#define PCI_DEVICE_ID_O2_SDS0 0x8420 -#define PCI_DEVICE_ID_O2_SDS1 0x8421 -#define PCI_DEVICE_ID_O2_FUJIN2 0x8520 -#define PCI_DEVICE_ID_O2_SEABIRD0 0x8620 -#define PCI_DEVICE_ID_O2_SEABIRD1 0x8621 - -/* - * O2Micro device registers - */ - -#define O2_SD_MISC_REG5 0x64 -#define O2_SD_LD0_CTRL 0x68 -#define O2_SD_DEV_CTRL 0x88 -#define O2_SD_LOCK_WP 0xD3 -#define O2_SD_TEST_REG 0xD4 -#define O2_SD_FUNC_REG0 0xDC -#define O2_SD_MULTI_VCC3V 0xEE -#define O2_SD_CLKREQ 0xEC -#define O2_SD_CAPS 0xE0 -#define O2_SD_ADMA1 0xE2 -#define O2_SD_ADMA2 0xE7 -#define O2_SD_INF_MOD 0xF1 -#define O2_SD_MISC_CTRL4 0xFC -#define O2_SD_TUNING_CTRL 0x300 -#define O2_SD_PLL_SETTING 0x304 -#define O2_SD_CLK_SETTING 0x328 -#define O2_SD_CAP_REG2 0x330 -#define O2_SD_CAP_REG0 0x334 -#define O2_SD_UHS1_CAP_SETTING 0x33C -#define O2_SD_DELAY_CTRL 0x350 -#define O2_SD_UHS2_L1_CTRL 0x35C -#define O2_SD_FUNC_REG3 0x3E0 -#define O2_SD_FUNC_REG4 0x3E4 -#define O2_SD_LED_ENABLE BIT(6) -#define O2_SD_FREG0_LEDOFF BIT(13) -#define O2_SD_FREG4_ENABLE_CLK_SET BIT(22) - -#define O2_SD_VENDOR_SETTING 0x110 -#define O2_SD_VENDOR_SETTING2 0x1C8 - -extern int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot); - -extern int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip); - -extern int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip); - -#endif /* __SDHCI_PCI_O2MICRO_H */ diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h index 3c1dd79fdbde..063506cc2ca9 100644 --- a/drivers/mmc/host/sdhci-pci.h +++ b/drivers/mmc/host/sdhci-pci.h @@ -5,6 +5,12 @@ * PCI device IDs, sub IDs */ +#define PCI_DEVICE_ID_O2_SDS0 0x8420 +#define PCI_DEVICE_ID_O2_SDS1 0x8421 +#define PCI_DEVICE_ID_O2_FUJIN2 0x8520 +#define PCI_DEVICE_ID_O2_SEABIRD0 0x8620 +#define PCI_DEVICE_ID_O2_SEABIRD1 0x8621 + #define PCI_DEVICE_ID_INTEL_PCH_SDIO0 0x8809 #define PCI_DEVICE_ID_INTEL_PCH_SDIO1 0x880a #define PCI_DEVICE_ID_INTEL_BYT_EMMC 0x0f14 @@ -164,4 +170,10 @@ static inline void *sdhci_pci_priv(struct sdhci_pci_slot *slot) int sdhci_pci_resume_host(struct sdhci_pci_chip *chip); #endif +int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot); +int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip); +#ifdef CONFIG_PM_SLEEP +int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip); +#endif + #endif /* __SDHCI_PCI_H */
We keep PCI Ids in sdhci-pci.h and the O2-specific definitions belong in sdhci-pci-o2micro.c. Move those definitions accordingly. Remove unused O2 definitions in sdhci-pci-core.c. The 3 o2micro external function declarations might as well be in sdhci-pci.h as well, so move them there and get rid of sdhci-pci-o2micro.h entirely. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> --- drivers/mmc/host/sdhci-pci-core.c | 10 ----- drivers/mmc/host/sdhci-pci-o2micro.c | 35 ++++++++++++++++- drivers/mmc/host/sdhci-pci-o2micro.h | 73 ------------------------------------ drivers/mmc/host/sdhci-pci.h | 12 ++++++ 4 files changed, 46 insertions(+), 84 deletions(-) delete mode 100644 drivers/mmc/host/sdhci-pci-o2micro.h