@@ -2655,8 +2655,7 @@ void mmc_start_host(struct mmc_host *host)
void mmc_stop_host(struct mmc_host *host)
{
if (host->slot.cd_irq >= 0) {
- if (host->slot.cd_wake_enabled)
- disable_irq_wake(host->slot.cd_irq);
+ mmc_gpio_set_cd_wake(host, false);
disable_irq(host->slot.cd_irq);
}
@@ -154,6 +154,29 @@ void mmc_gpiod_request_cd_irq(struct mmc_host *host)
}
EXPORT_SYMBOL(mmc_gpiod_request_cd_irq);
+int mmc_gpio_set_cd_wake(struct mmc_host *host, bool on)
+{
+ int ret = 0;
+
+ if (!(host->caps & MMC_CAP_CD_WAKE) ||
+ host->slot.cd_irq < 0 ||
+ on == host->slot.cd_wake_enabled)
+ return 0;
+
+ if (on) {
+ if (device_may_wakeup(mmc_dev(host))) {
+ ret = enable_irq_wake(host->slot.cd_irq);
+ host->slot.cd_wake_enabled = !ret;
+ }
+ } else {
+ disable_irq_wake(host->slot.cd_irq);
+ host->slot.cd_wake_enabled = false;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(mmc_gpio_set_cd_wake);
+
/* Register an alternate interrupt service routine for
* the card-detect GPIO.
*/
@@ -33,5 +33,6 @@ void mmc_gpio_set_cd_isr(struct mmc_host *host,
irqreturn_t (*isr)(int irq, void *dev_id));
void mmc_gpiod_request_cd_irq(struct mmc_host *host);
bool mmc_can_gpio_cd(struct mmc_host *host);
+int mmc_gpio_set_cd_wake(struct mmc_host *host, bool on);
#endif
Commit 03dbaa04a2e5 ("mmc: slot-gpio: Add support to enable irq wake on cd_irq") enabled wakeup irrespective of the host controller's PM flags. However, users also want to control it from sysfs power/wakeup attribute. That means the driver needs to check the PM flags before enabling it in the suspend callback. Add helper function mmc_gpio_set_cd_wake() to make it easy for drivers to do that. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> --- drivers/mmc/core/core.c | 3 +-- drivers/mmc/core/slot-gpio.c | 23 +++++++++++++++++++++++ include/linux/mmc/slot-gpio.h | 1 + 3 files changed, 25 insertions(+), 2 deletions(-)