| Message ID | 1516206496-16612-14-git-send-email-yamada.masahiro@socionext.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Jan 18, 2018 at 01:28:13AM +0900, Masahiro Yamada wrote: > The TMIO mmc cannot detect the card insertion in native_hotplug mode > if the driver is probed without a card inserted. > > The reason is obvious; all IRQs are disabled by tmio_mmc_host_probe(), > as follows: > > tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL); > > The card event IRQs are first enabled by tmio_mmc_start_command() as > follows: > > if (!host->native_hotplug) > irq_mask &= ~(TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT); > tmio_mmc_enable_mmc_irqs(host, irq_mask); > > If the driver is probed without a card, tmio_mmc_start_command() is > never called in the first place. So, the card is never detected. > > The card event IRQs must be enabled in probe/resume functions. > > Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c index b20d5c5..0e3dc8c 100644 --- a/drivers/mmc/host/tmio_mmc_core.c +++ b/drivers/mmc/host/tmio_mmc_core.c @@ -350,8 +350,6 @@ static int tmio_mmc_start_command(struct tmio_mmc_host *host, c |= TRANSFER_READ; } - if (!host->native_hotplug) - irq_mask &= ~(TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT); tmio_mmc_enable_mmc_irqs(host, irq_mask); /* Fire off the command */ @@ -1294,11 +1292,13 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host) irq_mask |= TMIO_MASK_READOP; if (!_host->chan_tx) irq_mask |= TMIO_MASK_WRITEOP; - if (!_host->native_hotplug) - irq_mask &= ~(TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT); _host->sdcard_irq_mask &= ~irq_mask; + if (_host->native_hotplug) + tmio_mmc_enable_mmc_irqs(_host, + TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT); + spin_lock_init(&_host->lock); mutex_init(&_host->ios_lock); @@ -1382,6 +1382,10 @@ int tmio_mmc_host_runtime_resume(struct device *dev) if (host->clk_cache) tmio_mmc_set_clock(host, host->clk_cache); + if (host->native_hotplug) + tmio_mmc_enable_mmc_irqs(host, + TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT); + tmio_mmc_enable_dma(host, true); if (tmio_mmc_can_retune(host) && host->select_tuning(host))
The TMIO mmc cannot detect the card insertion in native_hotplug mode if the driver is probed without a card inserted. The reason is obvious; all IRQs are disabled by tmio_mmc_host_probe(), as follows: tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL); The card event IRQs are first enabled by tmio_mmc_start_command() as follows: if (!host->native_hotplug) irq_mask &= ~(TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT); tmio_mmc_enable_mmc_irqs(host, irq_mask); If the driver is probed without a card, tmio_mmc_start_command() is never called in the first place. So, the card is never detected. The card event IRQs must be enabled in probe/resume functions. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- Changes in v3: None Changes in v2: - Newly added drivers/mmc/host/tmio_mmc_core.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)