| Message ID | 1563776607-8368-2-git-send-email-wahrenst@gmx.net (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | None | expand |
On Mon, Jul 22, 2019 at 8:23 AM Stefan Wahren <wahrenst@gmx.net> wrote: > Add a new compatible for the BCM2711. > > Signed-off-by: Stefan Wahren <wahrenst@gmx.net> (...) > + "brcm,bcm2711-gpio" - BCM2711 compatible pinctrl Completely uncontroversial so patch applied. Yours, Linus Walleij
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt index ac6d614..3cab733 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt @@ -8,6 +8,7 @@ Required properties: - compatible: should be one of: "brcm,bcm2835-gpio" - BCM2835 compatible pinctrl "brcm,bcm7211-gpio" - BCM7211 compatible pinctrl + "brcm,bcm2711-gpio" - BCM2711 compatible pinctrl - reg: Should contain the physical address of the GPIO module's registers. - gpio-controller: Marks the device node as a GPIO controller. - #gpio-cells : Should be two. The first cell is the pin number and the
Add a new compatible for the BCM2711. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> --- Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt | 1 + 1 file changed, 1 insertion(+) -- 2.7.4