diff mbox series

[3/3] arm64: dts: qcom: ipq6018: add SDHCI node

Message ID 1682338412-15420-3-git-send-email-mantas@8devices.com (mailing list archive)
State New, archived
Headers show
Series [1/3] clk: qcom: gcc-ipq6018: Use floor ops for sdcc clocks | expand

Commit Message

Mantas Pucka April 24, 2023, 12:13 p.m. UTC
IPQ6018 has one SD/eMMC controller, add node for it.

Signed-off-by: Mantas Pucka <mantas@8devices.com>
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

Comments

Robert Marko Oct. 31, 2023, 7:46 p.m. UTC | #1
On 24. 04. 2023. 14:13, Mantas Pucka wrote:
> IPQ6018 has one SD/eMMC controller, add node for it.
>
> Signed-off-by: Mantas Pucka <mantas@8devices.com>

Tested-by: Robert Marko <robimarko@gmail.com>

> ---
>   arch/arm64/boot/dts/qcom/ipq6018.dtsi | 23 +++++++++++++++++++++++
>   1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> index 9ff4e9d45065..b129b23d68b1 100644
> --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> @@ -414,6 +414,29 @@
>   			};
>   		};
>   
> +		sdhc_1: mmc@7804000 {
> +			compatible = "qcom,ipq6018-sdhci", "qcom,sdhci-msm-v5";
> +			reg = <0x0 0x07804000 0x0 0x1000>,
> +			      <0x0 0x07805000 0x0 0x1000>,
> +			      <0x0 0x07808000 0x0 0x2000>;
> +			reg-names = "hc", "cqhci", "ice";
> +
> +			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "hc_irq", "pwr_irq";
> +
> +			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
> +				 <&gcc GCC_SDCC1_APPS_CLK>,
> +				 <&xo>,
> +				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
> +			clock-names = "iface", "core", "xo", "ice";
> +
> +			resets = <&gcc GCC_SDCC1_BCR>;
> +			supports-cqe;
> +			bus-width = <8>;
> +			status = "disabled";
> +		};
> +
>   		blsp_dma: dma-controller@7884000 {
>   			compatible = "qcom,bam-v1.7.0";
>   			reg = <0x0 0x07884000 0x0 0x2b000>;
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 9ff4e9d45065..b129b23d68b1 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -414,6 +414,29 @@ 
 			};
 		};
 
+		sdhc_1: mmc@7804000 {
+			compatible = "qcom,ipq6018-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x07804000 0x0 0x1000>,
+			      <0x0 0x07805000 0x0 0x1000>,
+			      <0x0 0x07808000 0x0 0x2000>;
+			reg-names = "hc", "cqhci", "ice";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo>,
+				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+			clock-names = "iface", "core", "xo", "ice";
+
+			resets = <&gcc GCC_SDCC1_BCR>;
+			supports-cqe;
+			bus-width = <8>;
+			status = "disabled";
+		};
+
 		blsp_dma: dma-controller@7884000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x0 0x07884000 0x0 0x2b000>;